USB 3.0 3-Port Hub with Gigabit Ethernet
SenseVision USB 3.0 Hub 3 Ports with Gigabit Ethernet
Support IEEE 802.3az (Energy Ecient Ethernet)
Support IPV4/IPV6 pack Checksum Ooad Engine
(COE) to reduce CPU loading
Slim design makes it easy to hand carry.
Support wake-on-LAN function
Support Green Ethernet
USB bus powered 3.3V/500mA
CSV-1430 MANUAL
It works with Windows XP, Vista, 7, 8, 8.1, 10, Mac OS X
USB
USB
3.0
3.0
3x
3x
GB
ETHERNETGBETHERNET
ULTRA
ULTRA
SLIM
SLIM
SIZE
SIZE
NO
NO
NEED
NEED
POWER
POWER
SUPPLY
SUPPLY
APPLE
APPLE
OS X
OS X
Microsoft
Microsoft
WINDOWS
WINDOWS
www.club-3d.com
USB 3.0 3-Port Hub with Gigabit Ethernet
Introduction
USB 3.0 3-Port hub with Gigabit Ethernet adapter is compliant with USB 2.0
specification. It is two applications in the product. With USB interface, you can
access USB 3.0 Hub and Giga Ethernet at the same time. Stylish design and slim
type make it easy to carry.
Features
USB 3.0 Giga LAN with 3 ports USB 3.0 HUB
Small design make users easy hand carry.
Support wake-on-LAN function
Support Green Ethernet
Support IEEE 802.3az(Energy Efficient Ethernet)
Support IPV4/IPV6 pack Checksum Offload Engine(COE) to reduce CPU loading
It works with Windows® and Mac OS®
Bus-powered
Package Contents
CSV-1430 MANUAL
1x USB 3.0 Male
USB 3.0 3-port Hub with Gigabit Ethernet Adapter
CD (Driver & User’s Manual)
Quick Installation Guide
System Requirements
PC with USB port.
Laptop with USB port.
One of the following operation systems: Windows® & Mac OS®
www.club-3d.com
3x USB 3.0 Female
Gigabit Ethernet Female
USB 3.0 3-Port Hub with Gigabit Ethernet
Driver Installation on Windows™ and Mac OSX®
Caution: DO NOT connect the Ethernet adapter to your computer before
you install the provided driver. You will be instructed to do so later.
1. Insert the provided CD into your disc drive. Then locate and double-click the
setup.exe file under x:\Driver\Windows where x is your disc drive letter.
2. When you click setup.exe, you could see the screen as below
CSV-1430 MANUAL
3. Click Finish to complete Ethernet Driver.
Now the installation is completed. You can connect the adapter to a network device by an
Ethernet cable:
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub, switch or router.
The Link LED should light up green to indicate a proper physical connection between the
adapter and the network. If the Link LED doesn’t light up, please verify the cable
connections between all the network devices.
*Actual strings depend on your operation system. These screen shots are from Windows®
8.1 and might vary slightly for each operation system.
www.club-3d.com
USB 3.0 3-Port Hub with Gigabit Ethernet
On Mac OS®
CSV-1430 MANUAL
1. Insert the provided driver CD into your CD-ROM drive. Double-click <AX88179
.pkg> to launch the setup procedure.
2. When the Install AX88179/178A Ethernet Adapter Driver screen appears, please
select Continue.
3. When the screen below appears, please click Install to install
4. Please enter your password as prompted, and click Install Software to start the ..
installation.
www.club-3d.com
USB 3.0 3-Port Hub with Gigabit Ethernet
5. When the screen below appears, please click Continue Installation. 7. When the driver is successfully installed, click Restart to restart your computer
CSV-1430 MANUAL
6. It will take a while to install the driver.
www.club-3d.com
*Actual strings depend on your operation system. These screen shots are from Mac
OS® v10.9 and might vary slightly for each operation system.
Loading...