Page 1
GB
PROGRAMMABLE
MAGNETIC BIKE
USER’S MANUAL
Page 2
Page 3
This quality products is designed, manufactured, tested and certified for enhanced
Fitness Training.
Dear Customer,
We want to thank you for having chosen a programmable MAGNETIC BIKE product and wish you a lot of
fun and success during training.
Please note and follow the enclosed safety and assembly instructions carefully.
If you have questions please do not hesitate to contact us.
Table of Content:
1. Safety Instructions .............................. P. 2
2. Hardware Package ............................. P. 3
3. Assembly Instructions ........................ P. 4
4. Computer Instructions.......................... P. 6
5. Training Instructions ............................ P.10
6. Exploded Drawing ............................... P.11
7. Parts List ............................................. P.12
8. Training pulse rate............................... P.14
Safety Instructions
Before you start training on your home PROGRAMMAB
LE MAGNETIC BIKE, please read the instructions carefully.
Be sure to keep the instructions for information, in case of repair and for spare part delivery.
The HM-6004M is made for home use only and
tested up to a max. body weight of 100 kg.
Follow the steps of the assembly instructions
carefully.
Use only original parts as delivered.
For assembly use only suitable tools and ask for
assistance with assembly if necessary.
Place the bike on an even, non-slippery surface.
Because of possible corrosion, the usage of the
home exercise bikes in moist areas is not
recommended.
Check before the first training and every 1-2 months
that all connecting elements are tight fitting and are
in the correct condition.
Replace defective components immediately and/or
keep the equipment out of use until repair.
For repairs, use only original spare parts.
In case of repair please ask your dealer for advice
Avoid the use of aggressive detergents when
cleaning the home exerciser.
Ensure that training starts only after correct
assembly and inspection of the item.
For all adjustable parts be aware of the maximum
positions to which they can be adjusted/tightened
to.
The home exerciser is designed for adults. Please
ensure that children use it only under the
supervision of an adult.
Ensure that those present are aware of possible
hazards, e.g. movable parts during training.
Consult your physician before starting with any
exercise programme. He can advise on the kind of
training and which impact is suitable.
Warning: incorrect/excessive training can cause
health injuries.
Please follow the advice for correct training as
detailed in training instructions.
The load/work level can be adjusted by turning the
up/down knob on the computer.
GB
- 2 -
Page 4
Hardware Package
GB
- 3 -
Page 5
Assembly Instruction
Step 1
1. Fasten front stabilizer (2) and rear stabilizers (3) each
with 2 carriage bolts (21) from the underside of
stabilizers. Sesure with 2 washers (23) & domed
nuts (22) to main frame (1).
Step 2
2. Screw pedal (26) onto the crank arm set (39). The
pedals are marked with R and L at the screw. Tighten
the left pedal counter-clockwise, the right pedal
clockwise.
Step 3
1. Unscrew the pre-assembled 4 hex. Bolts (24) & 4
washers (25).
2. Connect the upper computer cable (18) with lower
computer cable (19) tightly.
3. Put the handlebar post (4) into the main frame (1).
Secure with 4 hex. Bolts (24) & 4 washers (25) tightly.
Step 4
1. Release round knob (11) and sleeve (14) from
fastener at handlebar post (4). Open up fastener and
place the handlebar (31) onto fastener.
2. Select the desired position for handlebar (31), fasten
the fastener by round knob (11) with sleeve (14)
securely.
GB
GB
GB
GB
GB
- 4 -
Page 6
Step 5
1. Plug the upper computer cable (18) to jack at back of
computer (20). Slide computer (20) to the bracket at
the top of handlebar post (4), secure with 4
screw (47) firmly.
2. Plug the hand pulse sensor wire (42) to jack at back
of computer (20).
Step 6
1. Attach right and left plastic computer holder (30) to
handlebar post (4) (under handlebar (31)). Secure
with 4 bolts (52) firmly.
Step 7
1. Attach saddle adjustable post (6) to saddle (7),
secure with 3 x washer (45) and 3x locknut (44).
2. Release the knob (10) from saddle post (5). Put
saddle adjustable post (6) into saddle post (5). Select
the desired position and fasten with knob (10).
Step 8
1. Loosen & pull the saddle post knob (13). Insert the
saddle post (5) to the main frame (1), choose the
desired position and tighten the Saddle post knob (13)
again.
2. Attach adaptor (49) to DC wire (48) at back of main
frame (1).
3. Ensure that the knob is always tightened.
GB
GB
GB
GB
- 5 -
Page 7
Computer Instructions
Programable Trainging Computer - SM3105-20
Initial operating process: (After the computer is power on with adaptor installed)
Step One
You may use UP or DOWN to select training mode in MANUAL or PROGRAM (12 different
profiles) or USER or TARGET HEART RATE control (4 different options for training). If you
select training with Target Heart Rate control mode, you need to input AGE data, and
switch to next procedure.
Step Two
You may use UP or DOWN to adjust the training LOAD/DIFFICULTY level from 1 to 16 under
MANUAL, PROGRAM and USER mode .(Exclude TARGET HEART RATE CONTROL mode)
Step Three
You may use UP or DOWN to preset training function datas, when each function data has
been preset, press ENTER.
Available preset training functions:
TIME: Preset area is from 00:00 to 99:00, each increment is 1:00 (minute).
DISTANCE: Preset area is from 0.00 to 99.90, each increment is 0.10 km or ml.
CALORIE: Preset area is from 0 to 990, each increment is 10 cal.
WATT: Preset area is from 10 to 350, each increment is 10 watt.
(WATT can be preset under MANUAL mode only)
PULSE: Preset area is form 30 to 240, each increment is 1 BPM.
(Exclude in TARGET H.R control mode)
Step Five
Press START/STOP button to start training.
Training Mode Instruction:
To start your training :
As soon as you press START/STOP button without any presetting (functions and programs), the
computer starts working under Manual mode.
Training without preset Time:
If you do not preset TIME,each unit of the profile switches forth to another per 0.1 km or ml
in counting up (no preset DISTANCE) or counting down (has preset DISTANCE).
Training with preset Time:
If you have preset TIME,each unit of the profiles switches forth to another per preset TIME
divided by 16.
Tension difficulty adjustment:
You may adjust the tension load from 1 to 16 during training under Manual mode if you did
not preset Watt function.
If you have preset WATT, tension load will be auto-adjusted depends on the current speed and
watt values you are working out.
There will be four different symbols showes up to help your training:
You need to slow down the training speed.
You need to speed up the training.
GB
- 6 -
Page 8
------- This is to remind the current WATT is OVER SPEC, and you need to speed up or slow
down training speed accordingly.
** When the WATT is over spec, computer has Bi-Bi-Bi/second to remind you. If you
keep training under this mode for over 3 minutes,the computer has an ALARM with
6 beeps sounds for 30 seconds, and the computer system STOP automatically, at
this moment, LOAD is down to 1, and preset WATT data is zero. During the ALARM
period, you can stop ALARM by pressing any function buttons.
Training with 12 profiles - You can select from P1 to P12 profiles for training, also you can
adjust training levels any time during training.
Training with USER - You can preset your personal training profiles under this mode. During
training, you can also adjust training levels any time.
Training in TARGET H.R. control - The tension difficulty will be auto-adjusted according to
the current heart rate figure. If your heart rate figure is under the target pulse, the tension
difficulty will be up-adjusted one level per 30 seconds, up to the maximum level 16. As
soon as your heart rate figure is achieved at the target pulse, tension difficult will be down
adjusted one level immediately, and keep down-adjusted one level per 15 seconds until
level 1. If your current heart rate is still over (or equal to) the target pulse for 30 seconds
when tension is level 1, the computer system will STOP and ALARM for 6 beeps to remind
you as the training protection.
You may select fixed preset target heart rate percentage or input your personal traning
target heart rate figures.
Target Pulse with different percentage selected -
You may use UP or DOWN to have the TARGET HEART RATE figure be zero, and
press ENTER button. At this moment, you may select the percentage of
the heart rate that you will achieve in the training. The computer provides 3
different percentage of the maximum heart rate which is calculated by the
CPU according to the AGE data you inputed.
Remark: 55%MAXH.R. - If you input age in 30, the figure will be 104, this figure
is 55% of the max. heart rate figure which is 190, the proper figure
calculated by the CPU compared the age of 30. The same formula
can be used to have the result for 75%, and 90%.
Target Pulse figure input by yourself -
You may preset your target pulse figure by pressing UP and DOWN buttons. As
soon as you have preset the target pulse figure, the level will be fixed on level
1, and you may only start training from level 1. When your actual heart rate has
reached over the target, the computer starts to alarm to remind you, and it
stops when your heart rate comes under the target.
To stop your training:
Training with PRESET function datas:
As soon as the preset function datas counting down to zero,(pulse figures excluded)
the computer has 8 beep sounds and remind you. At this moment, the computer will
stop working. You may press START/STOP button to start the computer working and
counting up from the previous datas.
- 7 -
Page 9
Interupt training:
You may press START/STOP button to stop computer working during training any time.
To reset program:
You may press RESET button to reset the PROGRAM and select the training mode and
tension load or difficulties under STOP mode. If you hold on pressing the RESET button
for 2 seconds, all datas(including personal datas) will be total reset.
Buttons:
ST/STOP
To start or stop training.
ENTER
To select each function of Time, Distance, Pulse, Watt for preseting.
ENCODER UP
To up adjust datas.
ENCODER
DOWN
To down adjust datas.
RESET
1. To reset each function of Time, Distance, Pulse, Watt function figures.
2. To reset program setting and back to initial selection mode with Manual, Program,
user, or Target Heart Rate all blinking display.
RECOVERY
To have pulse recovery function work.
Functions:
TIME
Count Up - The computer starts counting up from 00:00 up to 99:59 during training.
Count Down - The computer will count down from the preset Time to 00:00.
SPEED
Displays the current SPEED from 0.0 to maximum 99.9 km or ml.
DISTANCE
Count Up - The computer accumulates total workout distance from 0.00 to the
max. 99.90 km or ml during training.
Count Down - The computer will count down from the preset Distance to 0.00.
CALORIES
Count Up- The computer accumulates the calories comsuption from 0 to the max.
990 cal during training.
Count Down - The computer will count down from the preset Calories to 0.
This data is a rough guide for comparison of different exercise sessions that can not
be used for medical treatment.
PULSE
The monitor can detect your handpulse. You may preset target pulse between 30 to 240
bpm to assist the training. The options you may have are as the following:
Alarm - If you preset the target pulse under training with Manual or other target
the computer will alarm to remind as soon as your current heart rate is
achieved at the preset figure.
Load tension adjustment - If you preset the target heart rate ( or select different
target heart rate percentage), the load resistance will be auto-adjusted
according to your actual heart rate figure compared with the preset
heart rate which is heart rate control program.
RECOVERY
After exercising for a period of time, keep holding on grips and press " RECOVERY"
button, all function display will stop except "Time". Time starts counging down
from 00:60 - 00:59 - 00:58 - to 00:00. As soon as 00:00 is reached, the bottom area of
LCD will show your heart rate recovery status with the grade F1, F2,… F6. F1 is the
- 8 -
Page 10
best, and F6 is the worst. You may keep exercising to improve the heart rate
recovery status day by day from F6 up to F1.
** Press the RECOVERY button again to return the main display.
WATT
After training for a while, the monitor will display current workout watt.
Note:
1. When there is no signal been transferred into the computer for 4 minutes, the LCD display will
shutt off automatically, and all previous training datas will be stored. You may press any
button to have the computer restart working.
2. The monitor has the same result as abovementioned point 2 if you press and hold on RESET
button for 4 seconds.
3. If the LCD display is improper, please remove the power connection and connect it again.
4. The monitor can be power on with an AC adaptor input (500mA, 6V)
- 9 -
Page 11
Training Instructions
To achieve a considerable improvement of your
physical resistance and your health, some aspects of
how to find the most efficient amount of training should
be followed:
If you have not been physically active for a longer period
of time and also to avoid health risks you should consult
your general physician before starting to exercise.
Intensity
To achieve maximum results the right intensity has to be
chosen.
The heart rate is used as guideline.
As a rule of thumb the following formula is commonly
used:
Maximum pulse rate = 220 - Age
While exercising the pulse rate should always be
between 60% - 85% of the maximum pulse rate.
For your personal training rates please see the attached
pulse rate chart on page 14.
When starting to exercise you should keep your rate at
60% of your maximum pulse rate in the first couple of
weeks.
With increasing improvement of fitness the pulse rate
should be slowly increased to 85% of your maximum
pulse rate.
Fat burning
The body starts to burn fat at approx. 60% of the
maximum pulse rate.
To reach an optimum at burning rate, it is advisable to
keep the pulse rate between 60% – 70% of the
maximum pulse rate.
The optimum training amount consists of three workouts
per week 30 minutes each.
Example:
You are 52 years of age and would like to start
exercising.
Maximum pulse rate = 220 - 52(age) = 168 pulse/min
Minimum pulse rate = 168 x 0.6 = 101 pulse/min
Highest pulse rate = 168 x 0.7 = 117 pulse/min
During the first weeks it is advisable to start with a pulse
rate of 101, afterwards increase it to 117.
With increasing improvement of fitness the training
intensity should be increased to 70% - 85% of your
maximum pulse rate.
This can be done by increasing the resistance, a higher
frequency or longer training periods.
Training Organization
Warm-up:
Before every your training you should warm-up for 5-10
minutes.
Here you can do some stretching and training with low
resistance.
Training session:
During the actual training a rate of 70% -85% of the
maximum pulse rate should be chosen.
The time-length of your training session can be
calculated with the following rule of thumb:
• daily training session: approx. 10 min. per unit
• 2-3 x per week: approx. 30 min. per unit
• 1-2 x per week: approx. 60 min. per unit
Cool down:
To introduce an effective cool-down of the muscles and
the metabolism the intensity should be drastically
decreased during the last 5 – 10 minutes.
Stretching is also helpful for the prevention of muscle
aches.
Success
Even after a short period of regular exercises you will
notice that you constantly have to increase the
resistance to reach your optimum pulse rate.
The units will be continuously easier and you will feel a
lot fitter during your normal day.
For this achievement you should motivate yourself to
exercise regularly.
Choose fixed hours for your training session and do not
start training too aggressively.
An old quote amongst sportsmen says:
“The most difficult thing about training is to start it.”
Wish you have a lot of fun and success with your
bike,
GB
- 10 -
Page 12
Exploded drawing
GB
- 11 -
Page 13
Parts List
NO.
Description
Quantity
1 Main frame 1
2 Front stabilizer 1
3 Rear stabilizer 1
4 Handlebar post 1
5 Saddle post 1
6 Saddle adjustable post 1
7 Saddle 1
8 Cap (for saddle adjustable post) 2
9 Fastener (for saddle adjustable post) 2
10 Knob (for saddle adjustable post) 1
11 Knob (for handlebar post) 1
12 Fastener (for saddle post) 1
13 Saddle post knob 1
14 Sleeve (for handlebar) 1
15 Tension control cable 1
16 Front stabilizer cap 2
17 Rear stabilizer cap 2
18 Computer cable (upper) 1
19 Computer cable (lower) 1
19 Motor 1
20 Computer 1
21 Carriage bolt (for front & rear stabilizer) 4
22 Domed nut (for front & rear stabilizer) 4
23 Washer (for front & rear stabilizer ) 5
24 Hex. Bolt (for handlebar post) 4
25 Washer (for handlebar post) 4
26 Pedal (R & L) 1
27 Central chain cover(R & L) 1
28 Chain cover (R & L) 1
29 Nut (for idle wheel fixture) 1
30 Plastic computer holder (R & L) 1
31 Handlebar 1
32 Foam grips (pair) 1
33 End caps (pair) 1
34 Hand pulse sensor 2
35 Screw (for chain cover) 5
36 Screw (for chain cover) 14
37 Screw driver 1
38 Allen key wrench 1
39 Crank arm set 1
40 Protector (for handlebar post) 1
41 Screw (for handle pulse sensor ) 2
42 Hand pulse sensor wire 1
43 Sensor 1
44 Locknut (for saddle) 3
45 Washer (for saddle ) 3
GB
- 12 -
Page 14
46 Protector (for flywheel) 2
47 Screw (for computer) 4
48 DC cable 1
49 Adaptor 1
50 Screw (for chain cover) 4
51 Protector (for crank) 2
52 Screw (for plastic computer holder) 4
53 Ring (for handlebar post) 1
54 End cap (for front & middle post) 2
A1001 Washer (for flywheel) 2
A1002 Washer (for flywheel) 2
A1003 Nut (for flywheel) 2
A1004 Bolt (for idle wheel fixture) 1
A1005 Bolt (for idle wheel fixture) 1
A1006 Nut (for idle wheel) 1
A1007 Steel sleeve 1
A1008 Screw (for motor) 2
B2001 Flywheel set 1
B2002 Belt wheel 1
B2003 Idle wheel 1
B2004 Motor 1
C3001 Ball bearing set 1
C3002 Spring 1
D4001 Poly-v belt 1
D4002 Sensor 1
D4003 Magnet 1
D4004 Idle wheel fixture. 1
- 13 -
Page 15
Training Pulse Rate
The owner’s manual is only for the customer reference.
GB
- 14 -
Loading...