Page 1
!
Page of 1 4
USB 3.0 to DisplayPort 4K Graphics
CSV-2302
Page 2
Installing the Driver
#
NOTE: DO NOT connect the adapter to the computer before
completing the driver installation.
* The actual strings of the driver may vary slightly on each operating
system, and the driver version is subject to change without notice.
#
#
Windows® 7 / Windows® 8 / Windows® 8.1
#
1. Insert the provided CD into your disc drive.
2. Click Run Setup.exe to execute the installer program.
3. Click I Accept to accept the license agreement.
4. Wait for the program to install the driver.
5. Click Finish to complete the installation if asked.
#
NOTE:
If the AutoPlay does not appear automatically, locate and double-click
on the Setup.exe file in the driver folder to launch the setup.
Enter the administrator password and then click Yes to start the
installation if a User Account Control dialog box appears.
#
Connecting the Adapter
Make sure the device (Desktop, Laptop…) is DisplayPort embedded or
bundled any adapter/connector with DisplayPort.
Connect the adapter to your monitor or computer after driver
installation is completed.!
Page of 2 4
Page 3
Changing the Display Mode
An extra DisplayPort monitor can be connected through the adapter
directly. Once the extra monitor is connected, it can be configured to
use either “mirror mode”, “extended mode” or set to be the primary
display.
Position the mouse anywhere on the Windows Desktop, Right-click
and select Screen Resolution.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Alternatively, click the utility icon in the Windows System Tray,
and then select Video Setup.
#
The Quick Installation Guide describes only the basic
instructions on installation. For more information, please refer
to the User’s Manual on the provided CD.!
Page of 3 4
Page 4
Page of 4 4
Loading...