Clover Electronics DV0890, DV1690 User Manual

INSTRUCTION MANUAL

Stand-Alone 8 & 16Channel

DIGITAL VIDEO RECORDER

MODEL DV0890, DV1690

Ver. 010313

Copyright © 2011 Clover Electronics U.S.A. All Rights Reserved.

DIGITAL VIDEO RECORDER MANUAL

Preface

This manual contains user instruction on how to operate the Digital Video Recording

device (DVR Unit), Remote Controller, Client Application, Mobile Application and Central

Monitoring Software Application.

This manual also contains cautions and notification regarding safe operating parameters

to protect the equipment and equipment operator. Please read this manual and comply

with its suggested guidelines for proper operation of this equipment.

For any further concerns and question please inform sellers for further information.

Please properly retain this copy of the manual for future reference.

About This Guide

This guide is comprised of Table of Contents where you will find Chapters divided

logically discussing about particular topics. Then it is further divided by sections that

discuss more detailed discussion pertaining to certain features of Chapter topics.

This manual also includes Index section where popular subjects or key concepts are

referenced by page numbers where those topics are discussed.

What this manual is not discussing are topics about upgrades and repairing physical unit.

These should be done through seller’s authorized repair centers or by detailed direction

from seller. Upgrades and repairs consists of adding and removing Hard Disk Drive,

adding and removing other media drive, upgrade or downgrade the Firmware, replace

any electronic components inside physical units. These actions should be under the

guidance of qualified technician because improper actions may cause permanent

damages to the unit. Some drives also have compatibility constraints and they are

constantly being updated as new products emerge from drive manufacturers.

DIGITAL VIDEO RECODER MANUAL

2

DIGITAL VIDEO RECORDER MANUAL

Warning

Check if the power is switched off before installation.

Don’t plug in at the same time. Otherwise it may be

set on fire or put you at the risk of electrocution or

damage.

Keep the cables at least 15 centimeters away from

the wall and at least five centimeters away from the

side so that the cables, including power line and

video cable, may not be disfigured. Otherwise it

might put you at the risk of fire, electrocution and

damage.

Check if the power is switched off before installation

or additional repair. Never plug in while the device is

in operation. Otherwise it might be set on fire or put

you at the risk of fire, electrocution and damage.

Never uplift the cover, break down, repair and

maintain at your disposal. Otherwise it might put

you at the risk of fire, electrocution and damage.

.

Keep the device environment always clean before

and after installation of the device. Use dry cloth to

clean the device. Never use any organic solvent.

Otherwise it might be the cause of electrocution or

mechanic disorder.

When strange noise or smell is sensed, immediately

plug out and send inquiry to service center or seller.

Input voltage of the device should come within the

range of 10 percent of specified voltage. Use

separate wall power to keep heating appliances,

including hair dryer, iron and refrigerator. Otherwise

it might be the cause of fire and electrocution.

Do not install device in humid place filled with dust.

It might be the cause of electrocution and fire.

DIGITAL VIDEO RECODER MANUAL

3

DIGITAL VIDEO RECORDER MANUAL

Caution

Do not install the device in any place where strong

magnetic flow, electric wavelength and vibration may

be sensed or where radio, TV or other wireless

device is located. Keep the device away from

magnetic flow, electric wave or vibration.

Strong shockwave or vibration may be the cause of

mechanic disorder. Please be careful.

Check if power switch and record on the front side

of the product is still turned on.

Do not put anything heavy on the product.

Otherwise it may be the cause of disorder.

Be careful so that anything conductive may not fall

into the ventilation hole. Otherwise it may be the

cause of disorder.

When HDD is overloaded, you change the setting to

keep recording. In that case, check again if it would

be OK to eliminate the saved data.

When HDD saving data gets old enough, video data

to be saved may suffer so much damage that it may

be irreparable. If screen appears broken while

regenerating data saved in HDD, it means HDD

won’t work any longer. Immediately contact service

center to replace them.

When any abnormal sign is detected,

immediately contact seller or service center.

DIGITAL VIDEO RECODER MANUAL

4

DIGITAL VIDEO RECORDER MANUAL

TABLE OF CONTENTS

1. Summary

∙ Feature ……………………………………………………………………………………………….………………………..……………….8

2. Installation

∙ Contents ………………………………..…………………………………………………………………….…………………………………..9

∙ Front panel ………………………………………………………………………………………………………………………..……….….10

∙ Rear panel.………………………………………………………………………………………………………………………………………11

3. System Operation

∙ Icon………………………………………………………………………………………………………………………………………..…..…..…12

∙ Remote Controller…………………………………………………………………………….………………………………………..…..14

∙ How to setup the remote controller ID ………………………………………………………………………………..….…..15

4. System configuration

∙ System..……………………………………………………………………………………………………………………….……..……..…….16

∙ Time/Date………………….……………………………………………………………………………….……………………………..……17

∙ Password………………..……………………………………………………………………………………………..…………………..…….18

∙ Hard Disk…………………………….……………………………………………………………………………………………..……..…….19

∙ Default Setup………………..…………………………………………………………………………………………………....…….…….20

∙ Upgrade……..………………………………………………………………………………………………………………………..………....20

∙ BUTTON SETUP………..…………………………………………………………………………………..………………………….….……21

∙ RS-485……………………………..……………………………………………………………………………..……….………………….…….22

5. Display

∙ OSD……………………………………………………............................................. ……………....................................................….22

∙ SPLIT MODE……………………………………............................................. ……………....................................................….23

∙ Auto Sequence..…….………………..…………………………………………………………………………….……..…..…………….25

∙ TV Adjustment…………..………………………………………………………………………………………………...………..…..……26

6. Network Setup

∙ IP Address……….………………..………………………………………………………………….………………………………………….26

∙ Notification….………………..………………………………………………………………….………………………………………….27

∙ Selecting E-mail Notification…………………………………………………………….………………………………………….28

∙ Web Server………………………..………………………………………………………………………………………….………………….29

∙ Free DDNS………………………..………………………………………………………………………………………….………………….29

∙ Dual Codec Setup…………..………………………………………………………………………………………….………………….35

DIGITAL VIDEO RECODER MANUAL

5

DIGITAL VIDEO RECORDER MANUAL

7. Camera Setup

∙ Camera ……………….………………………………………………………………………..…………………………………..…………..…36

∙ Camera Title……….………………………………………………………………………..…………………………………..…………..…36

∙ PTZ Setting………….….……………………….………………………………………………………………………………………...……37

∙ How to use PAN/TILT….….……………………….………………………………………………………………………………...……39

8. Record

∙ Record Setup…………………………..……….……………………………………………………………………….…………………….41

∙ Schedule Record..……………………..……….…………………………………………………………….………….………………….42

∙ Holiday Record..…...…………………………..……….…………………………………………………………….………….………….43

9. Event Setup

∙ sensor…………………..………..…………………………………………………………………………………….…….……………………44

∙ Motion Detection.…………..…..……………………………………………………………………….……………………..……..……44

∙ Camera Temper Detection...……………….…………………………………………………………..……..…………………..……47

∙ Event Action……..………………..…………………………………………………………………………………………………….……..47

10. Search

∙ Search…………..…………………………….………………………………………………………….………………………………..……49

∙ DATA / TIME Search……………..……………..………………………………………………………………….………………………51

∙ Event Search...…………………………………....……………………………………………………………………..……………….……51

∙ Go to First / Go to Last…..………………………………………………………………………………………….………………..…52

∙ Search Control…………………………….……….……………………………………………………………………….……………......52

∙ Audio ……………….………………………..….………….…….……………………………………………………………..…………......53

11. Backup

∙ Backup…………………………………………………..…………………………………………………………………………………………54

12. Remote Connection-iPhone………………………………………………………………………………………………………..59

13. Windows Mobile Viewer……………………………………………………………………………………………………………….68

14. Remote Connection-Android Phone…………………………………………………………………………………………..76

15 Appendix

∙ Specification ………………………..……………………………………………………………………………….……………....………86

DIGITAL VIDEO RECODER MANUAL

6

DIGITAL VIDEO RECORDER MANUAL

1 — Summary

Feature

This Stand Alone Digital Video Recorder is capable of high quality of video and audio data

recording and provides various ways of data search by Calendar, Date/Time and event. Also the

system allows remote user to access in order to monitor and control multiple local DVRs via

TCP/IP / LAN connection.

Main features

(1) High resolution live display

(2) Easy installation and operation

(3) Motion detection record

(4) Sensor and Alarm outputs

(5) Reserved recording (Motion, Sensor/Alarm and time selected record)

(6) Network control via Dynamic IP

(7) NTSC / PAL compatible

(8) Highest data compression of H.264 technology

(9) Data backup to USB memory stick

Application

(1) Bank, ATM unit, Supermarket, Convenient store and other public places.
(2) Private homes, Apartment, Jewelry shop, Commercial compound and other places where

it needs anti theft surveillance system.

(3) Warehouse, Production line and other places where evidence is needed after any event

happened and to analyze the situation.

(4) Where to monitor sites remotely

DIGITAL VIDEO RECODER MANUAL

7

2 — Installation

pter

Contents

Accessories.

Battery for

remote

controller

Size : AAA

1.5V X 2EA

Power

Ada

DIGITAL VIDEO RECORDER MANUAL

HDD fixing screw (8PCS)

Program CD

MANUAL

POWER

CODE

Remote

controller

ㆍ Digital Video Recorder (1EA)

ㆍ HDD Fixing screw (8pcs)

ㆍ Program CD (1EA)

ㆍ Manual (1EA)

ㆍ Power code (1EA)

ㆍ Remote controller)

ㆍ Battery AAA (1.5V 2EA)

ㆍ Adaptor (1EA)

[Note] Check the accessories before use.

DIGITAL VIDEO RECODER MANUAL

8

DIGITAL VIDEO RECORDER MANUAL

Front panel

(DV0890)

[1] POWER LED [2] RECORD LED [3] MENU Button [4] QUAD Button

[5] REC Button (Emergency / Schedule) [6] USB Port

(DV1690)

[1] POWER LED [2] RECORD LED [3] USB Port [4] MENU Button

[5] QUAD Button [6] REC Button (Emergency / Schedule)

DIGITAL VIDEO RECODER MANUAL

9

Rear panel

DIGITAL VIDEO RECORDER MANUAL

(4Ch DVR)

(8Ch DVR)

(16Ch DVR)

10

DIGITAL VIDEO RECODER MANUAL

DIGITAL VIDEO RECORDER MANUAL

[1] AUDIO OUTPUT

[2] AUDIO INPUT

[3] VIDEO INPUT

[4] VIDEO OUTPUT (COMPOSITE)

[5] VGA OUTPUT

[6] ETHERNET PORT (RJ-45)

[7] USB PORT (USB Drive / Mouse)

[8] RS-485/ALARM/SENSOR

[9] POWER (ADAPTER)

3 — System Operation

Icon

[1] The icons on the live screen indicate the status.

DIGITAL VIDEO RECODER MANUAL

11

DIGITAL VIDEO RECORDER MANUAL

[2] Camera title will be shown as above.

[3] Recording Status Icon

Recording.

Video Loss.

Motion Detection.

Sensor.

DIGITAL VIDEO RECODER MANUAL

12

DIGITAL VIDEO RECORDER MANUAL

[4] Status Bar

1. Date / Time

2. Record mode : Emergency recording - “ER”, Scheduled recording - “SR”.

3. Key Lock / Network Connectivity status.

4. Hard Disk status.

Remote Controller

[1] ID (Remote controller ID) : Press to select a remote controller ID in case of using one remote

controller to multi DVRs.

[2] SPLIT : Press to see split mode. Once press “▲” button, split mode can be changed and

press “▶” button to change channel group.

[3] BACKUP : Press to start recorded data archiving to external media.

[4] AUDIO : Select a audio channel.

DIGITAL VIDEO RECODER MANUAL

13

DIGITAL VIDEO RECORDER MANUAL

[5] SEQ (Sequence) : Press to display each camera in sequence for specific duration.

[6] PTZ : Call PTZ control menu.

[7] SEARCH : Call search menu to playback recording image.

[8] CHANNEL / NUMERIC BUTTON : Input the channel number to make full screen mode or the

number in setup menu.

[9] SETUP : Press to call setup menu

[10] DIRECTION KEY / CONFIRM BUTTON / PLAYBACK CONTROL

[11] REC : Select recording mode.

How to setup the remote controller ID

In order to use remote controller, the ID must be same both DVR and remote controller. By

assigning DVR ID, it allows the user to control multiple DVRs with one remote controller.

[1] Check current system ID and can be changed by user. (Factory default ID: “0”)

Menu > System > Information > Remote ID (Range: 0 ~ 99 )

System ID must be configured on DVR system menu. It cannot change DVR system

on remote controller.

DIGITAL VIDEO RECODER MANUAL

14

DIGITAL VIDEO RECORDER MANUAL

[2] How to use remote controller

ID must be identified between remote controller and system. Otherwise remote controller

cannot recognize DVR correctly.

[3] Remote controller ID menu displays as above image when you click ID button of remote

controller.

∙ Remote ID : It displays current ID of the system.

∙ “00” : Input the same ID number of DVR and press “Confirm”

4 — System configuration

System

[1] Remote ID : Assign the ID of remote controller, so that user can separately control multiple

DVR unit with one controller. (ID range: 0 ~ 99)

[2] Mouse Resolution : Mouse sensitivity level can be adjusted at user’s convenience.

(Basic Level 1; Slow speed, Level 1 < Level 2 < Level 3 to increase reaction speed.)

DIGITAL VIDEO RECODER MANUAL

15

DIGITAL VIDEO RECORDER MANUAL

[3] Language : Select a language

[4] Version : To show H/W Version and S/W Version

[5] Health: Indicates storage status

• HardDisk1 : Temperature of HDD.

• Front USB : Temperature of external storage with front USB port.

• Rear USB : Temperature of external storage with rear USB port.

[6] Video Detect Mode : Select a video signal format. (NTSC / PAL)

[7] Video Mode : Display video signal format

[8] WEB Code : DDNS ID for DDNS connection.

[9] MAC Address

Time/Date

[1] Time : Set the time.

[2] Date : Set the date.

DIGITAL VIDEO RECODER MANUAL

16

DIGITAL VIDEO RECORDER MANUAL

[3] Date Format : Select a Time / Date display format.

[4] Daylight Saving Time : It is commonly called as “Summer time”. During the period,

user can change system time 1 hour early or late.

[5] Time Server : It helps time set of DVR automatically by synchronization of time server service.

• Time server : Input the URL of server (Default : kr.pool.ntp.org )

• Synchronize Period : Select the period to syncronize between DVR and time server

ㅇ Power On : Try to sync once power on.

ㅇ 12Hour : Try to sync every 12 hours.

ㅇ 24Hour : Try to sync every 24 hours.

ㅇ Off : Disable to sync.

[6] Time Zone : Select a GMT zone.

[7] Apply : Save and apply time / date setting.

Password

[1] ID : ID : Able to input max. 8 user’s account. (“Admin” and “User1~7“)

(Channel display could be different per model 4ch/8ch/16ch)

[2] Password : Input the new P/W for the selected ID. (Max. 8 digit)

[Note] Default password of all ID is “11111111”.

DIGITAL VIDEO RECODER MANUAL

17

DIGITAL VIDEO RECORDER MANUAL

[3] Function : Assign user’s function on each account.

ㅇ Configuration

ㅇ HardDisk

ㅇ Search

ㅇ Backup

ㅇ PTZ Setting

ㅇ Record Key

ㅇ Camera

Hard Disk

It is the HDD and ODD setup. Since it is closely related to the record, if the setup is wrong, it may

cause the mal functioning.

[1] Hard Disk List : It shows the HDD information

ㅇ Hard Disk1 : Capacity of hard disk drive

ㅇ Front USB : Capacity of external drive on front USB port.

ㅇ Rear USB : Capacity of external drive on rear USB port.

ㅇ Erase Data : Format the disk.

[2] Total : Display total capacity of HDD ( Used size / Available size )

[3] Erase Data : Delete a recording date on selected disk.

[4] Auto delete : The function is to keep recorded data in HDD during only for specified period.

(Range: 1~120days)

[5] Advanced : Select a purpose of each device among “Main Disk”, “Mirror Disk”, “RW Write”

then “Apply” to reboot system.

DIGITAL VIDEO RECODER MANUAL

18

DIGITAL VIDEO RECORDER MANUAL

p

[NOTE] “Mirro Disk” or “RW Writer” purpose is able to setup when the external device is

connected with DVR via USB port.

Default Setu

[1] Default Setup : Except major configuration (Network, Password), parameters are initialized.

[2] Factory Setup : All parameters are initialized.

Upgrade

[1] USB

In order to upgrade system firmware with USB memory stick, the firmware file must be saved in

the USB storage first and then insert to DVR to start USB upgrade from the menu.

DIGITAL VIDEO RECODER MANUAL

19

DIGITAL VIDEO RECORDER MANUAL

p

Firmware

USB Memory Stick

[NOTE] Do not turn off power or remove USB stick while the upgrade is in progress.

[2] Configuration Backup : Save a configuration file of DVR.

[3] Configuration Load : Upload a configuration file to DVR.

Button Setu

• Auto key lock : There is no key input during specific time, system locks the button automatically.

In order to unlock, input the password. ( 10 sec. 30 sec. 1 min. OFF)

• Key Beep : If you select ON, beep sound occurs

DIGITAL VIDEO RECODER MANUAL

20

DIGITAL VIDEO RECORDER MANUAL

RS-485

In order to control the PTZ camera or control keyboard, DVR supports RS-485 port.

√ Baudrate /Parity /Stopbit : For using RS-485 port, refer to the manual of “Keyboard” or “PTZ

camera”.

5 — DISPLAY

OSD

DIGITAL VIDEO RECODER MANUAL

21

DIGITAL VIDEO RECORDER MANUAL

[1] Camera Title : ON / OFF

[2] Status Bar : ON / OFF.

[3] Multi screen Border : ON / OFF

[4] Login Display : Select a login option

• As Per Last Login : Display live image after system rebooting.

• Cover All Camera : Do not display live image after system rebooting.

[5] Log in menu : Select a log in option.

• Always from boot : Input the password after rebooting.

• Boot after lock : Auto login after rebooting.

[6] Alphablending : Select the transparency level of menu background.

SPLIT MODE

Channel can be switched into another by selecting split mode or a channel.

Channel display can be different per each model

[4 Split]

Displayed in 4/8/16ch

22

DIGITAL VIDEO RECODER MANUAL

[6 Split]

Displayed in 8/16

[9 Split]

DIGITAL VIDEO RECORDER MANUAL

Displayed in 8/16ch

.

[13 Split]

Displayed in 16ch

DIGITAL VIDEO RECODER MANUAL

23

DIGITAL VIDEO RECORDER MANUAL

[16 Split]

Displayed in 16

[Note]

Various split screen switch

If you press UP direction key in live mode, the split mode is changed. And if you press the RIGHT

direction key, the split group is changed. (There is 1ch full screen and 4 split in 4ch DVR.)

Auto Sequence

• Auto Loss Skip : If there is no video input, it skip video loss channel.

• Display time : Select a display duration while sequencing (1 sec. ~30 sec.)

DIGITAL VIDEO RECODER MANUAL

24

DIGITAL VIDEO RECORDER MANUAL

TV Adjustment

[1] Monitor : Output is fixed with 4:3 ratio.

[2] Icon : Change the icon position.

• Small : When using small monitor.

• NORMAL : When using normal monitor

• VGA : When using the monitor for VGA

6 — NETWORK SETUP

IP Address

It is the system setup for remote monitoring or backup and it needs the network setup of DVR.

The user must know whether their internet is dynamic IP(DHCP) or fixed IP. Please check it to your

ISP before setup.

[1] DHCP : “ON” for dynamic IP user.

“OFF” for static IP user.

DIGITAL VIDEO RECODER MANUAL

25

DIGITAL VIDEO RECORDER MANUAL

[2] IP Address : Input the IP address.

[Example]

• IP address : 61.250.152.050

• Subnet Mask : 255.255.255.000

• Gateway : 61.250.152.001

• DNS Address : 164.124.101.002

[3] DDNS Address : Do not change the DDNS server IP (61.250.157.14)

[4] Use Port : Default port is 3000.

[5] Upnp : If a router supports Upnp, it automatically set port forwarding.

[NOTE] In case of using the router, the user should make port forwarding.

The port forwarding function is described on the router manual.

Notification

When an event is triggered, it is notified to the user.

E-Mail Setup

It’s a basic setup to send E-mail, so if it is not correct, e-mail couldn’t be delivered. So be careful

to make Setup correctly.

26

DIGITAL VIDEO RECODER MANUAL

DIGITAL VIDEO RECORDER MANUAL

[1] SMTP SERVER : Designating the mail server sending a mail. Input the mail server address a

user uses.

[2] Use Port : Mostly 25 is used to a mail server. Check the port when it doesn’t work after Setup.

[3] Mail Address : Input the e-mail address of receipts (Available up to max 3 people)

[4] Password : When sending an e-mail in case ID & password input are necessary, set the ID &

password.

Selecting E-mail Notification

Select which type of notifications you are going to use.

Notification type : You can select the type for E-mail notification.

• Alarm : E-mail is sent with still image when an alarm occurs

• Sensor : E-mail is sent with still image when triggering a sensor

• Motion Detection : E-mail is sent with still image when detecting a motion.

• Video Loss : E-mail is sent when video input is lost.

• Power On : E-mail is sent when power is on after off.

• Password Modify : E-mail is sent when the system password is modified

• HDD Error : E-mail is sent when HDD error happens

DIGITAL VIDEO RECODER MANUAL

27