Clover Electronics CDR 0440 User Manual

SAFETY PRECAUTIONS

EXPLANATION OF SYMBOLS

This symbol is intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in the literature

accompanying the appliance.

This symbol is intended to alert the user to the presence of

unprotected “dangerous voltage” within the product’s enclosure that

may be strong enough to cause a risk of electric shock persons.

WARNING

To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

CAUTION

Changes or modifications not expressly approved by the manufacturer may void the user’s authority to

operate this equipment.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

The bellow safety precautions must be followed.

WARNING

z Do not use if the unit emits smoke, strange sounds is heard, or odor is emitted.

z Make sure the power cable is not damaged.

z Make sure there is no dust accumulation on the power plug or the outlet.

z Disassembly prohibited

z Do not place any foreign objects inside the unit.

z Do not place a container holding water or other liquids above the unit when it is connected to power.

z Do not allow the unit to get wet.

z Do not use during thunder/thunder storms.

z Do not place in an unstable position.

z Do not expose to shock or vibration.

z Do not use this unit in areas where it is exposed to the possibility of explosion.

CAUTION

z Do not pull on the power cable when removing the power plug from the outlet.

z Do not touch the power plug with wet hands.

z Do not sit on.

z Make sure the cables are connected properly.

z Do not place heavy objects on connected units.

z Never move this unit while the power is turned on.

z Do not block the cooling fans or air ducts.

z Do not expose to extreme temperatures or humidity changes.

Precautions for supplied AC Adaptor

CAUTION

z Never disassemble or modify.

z Never get the adaptor wet.

CAUTION

z Use only the supplied AC adapter.

z Do not connect to other appliances.

z Do not connect this unit with the AC adapter in areas reachable to children or where pets move

freely.

z Never touch the AC adapter with wet hands.

z If the unit emits smoke, strange sounds or smells immediately remove the AC adapter from the outlet.

z Do not use during thunder/thunder storms.

CAUTION

z Make sure the cable is connected properly.

z Preventing damage to a cable

Main features

z H.264 Video compression

z TRIPLEX operation (recording, playback, and networking)

z Instant and convenient data backup & firmware upgrade using USB flash drive

z Simple user interface

z Individual channel setting and operation

z Motion detection

System components and Installation

Requirements for installation and safety

This chapter is for the requirements for safe installation and use.

This kit should be installed on a flat table or in a rack.

The location in which the DVR is installed in the room is very important for proper operation of the system.

When the DVR is installed too closely together or the location is poorly ventilated, the DVR may not operate

properly and maintenance of the DVR may be difficult. Make sure that the air should be sufficiently circulated

within the system operating room and the cover of the main system must be tightly fastened to prevent

malfunction.

There are high voltage parts inside. Do not open the cover during operation.

The DVR must be installed in a place that meets the following environmental conditions.

• Operating temperature: 5°C ~ 40°C (41°F ~ 104°F)

• Operating humidity: 30% ~ 90% RH

• Input voltage: DC +12V 5A

• Power usage: About 25Watts

• Frequency: 60Hz/50Hz

Main replacement parts

חHard disk (When HDD is factory-installed.): 1 year (25°C environment)

חCooling fan: 1 year (25°C environment)

חBattery: 2 years (25°C environment)

CAUTION

During the operation of this product, the fluctuation of input voltage must be within 10% of the rated voltage

and the external power outlet must be grounded, otherwise, it may cause electric shock or malfunction of the

product.

Do not connect heat-generating appliances to the same power outlet in which the product is plugged,

otherwise it may cause a fire or malfunction of the product.

The use of an Automatic Voltage Regulator (AVR) is highly recommended to ensure that stable power is

supplied.

CAUTION

HDD that is installed in DVR can be changed with a new one. However we guarantee that the new HDD must

be the same brand and model.

Components of DVR Package

The package contains the main unit and its components as specified below. When you purchase the package,

please check to ensure the components specified below are included.

DVR Set

Remote Control

Battery1.5V (AAA x 2EA)

Adaptor and Power cable

Client Software CD

User Guide

HDD Power & SATA Cable

HDD Screws

Audio Cable (for 16ch)

Mouse (Option)

Basic function of the MOUSE

Mounting the HARD DISK

1. Unfasten the cover of the unit.

¢ : Left button: SELECT function

£ : Right button: ESC function

¢ : Double click: Go to sub menu

2. Fix the supplied HDD mounting bracket to the hard disk using the supplied mounting bracket screws.

3. Connect the supplied SATA cable and power cable to the hard disk and fix the hard disk to the unit using

the supplied HDD fixing screws.

SPECIFICATIONS

ITEM 4CH 8CH 16CH

Channel, Input Level 4CH, Composite 8CH, Composite 16CH, Composite

Video

Audio

Alarm

Record

Input

Output

Resolution

Signal Format NTSC/PAL

Video Loss Check Yes

Main Monitor Output 1 CH BNC, 1CH VGA: Selectable

Signal Format NTSC/PAL & VGA

Input & Output 4 CH Line input & 1 CH Line output

Audio Codec G.711(ADPCM)

Sensor Input ((NC/NO Selectable) 4 4 4

Alarm Output 1 Alarm out by Alarm, Motion, Video Loss

Compression H.264

Multi-operation TRIPLEX (Playback/Record/Network)

352x240 352x240 352x240

NTSC

PAL

- 704x240 704x240

704x480 704x480 704x480

352x288 352x288 352x288

- 704x288 704x288

704x576 704x576 704x576

Recording quality grade NETWORK, ECONOMY, NORMAL, HIGH, FINE.

Recording Mode Continuous / Schedule / Motion/ Sensor/ Manual

Motion Detection Motion detection setup by Grid

Pre Recording 1 fps for 5 seconds before an event

Post Recording 10 seconds to 3 minutes after an event

Display Frame Rate ( /Sec) NTSC: 30fps/ch, 60 fields / PAL: 25fps/ch, 50 fields

Multi-Decoding 1, 4 1, 4, 9 1, 4, 9, 16

Playback

Storage

Playback Speed

Search Mode Timeline, Event, Archive, Log

HDD

File system NaFS

Backup

Single channel × 2, 4, 8

Multi-channels × 2, 4

Interface Type Serial ATA I

Max. Capacity of 1 HDD 1TB

Internal HDD Number 1 1 1

USB Flash drive Video & Still Image

Network Video & Still Image

User I/F

Menu Display GUI

Input Method Front buttons, Remote control, Mouse Control

PTZ control & Keyboard DVR control 1 RS-485

Termination Yes

Network

Access

Multi-sites Monitoring System (1:n) Live, Search, Backup, PTZF Camera Control

Features

Power Power DC 12V 3A(for 4CH), DC 12V 5A(for 8,16CH)

Weight Unit Weight (Gross weight) 1.6 Kgs (3.1 Kgs) / 3.5 Lbs (6.8 Lbs)

Dimension Unit Dimension (W x H x D) 340 mm x 262 mm x 63 mm / 13.4" x 10.3" x 2.5"

Dynamic DNS Yes (Free DDNS)

Network Interface 10/100 base-TX Ethernet (RJ-45)

Client Software (1:1) Live, Search, Backup, PTZF Camera Control

Web viewer (1:1) Live, Search, Backup, PTZF Camera Control

DLS (Day Light Saving) Yes

Internal Beep By Alarm, Motion, Video Loss, HDD error

Multi-Language Yes

S/W Upgrade USB Flash drive

Water - mark Yes (Exclusive viewer)

Compatible HDD Models

Seagate

HITACHI

ST31000340SV(Surveillance) 1 TB 7200 RPM 32 MB

ST3500830SCE 500 GB 7200 RPM 8 MB

ST3250410AS(Barracuda) 250 GB 7200 RPM 16 MB

ST3250310SV(Surveillance) 250 GB 7200 RPM 8 MB

ST3160815AS(Barracuda) 160 GB 7200 RPM 8 MB

ST3500418AS(Barracuda) 500 GB 7200 RPM 16 MB

ST3500410AS(Barracuda) 500 GB 7200 RPM 16 MB

ST3250318AS(Barracuda) 250 GB 7200 RPM 8 MB

ST3100528AS(Barracuda) 1 TB 7200 RPM 32 MB

HDS721010KLA330 1 TB 7200 RPM 32 MB

HDS721050CLA362 500 GB 7200 RPM 16 MB

HDP725050GLA360 500 GB 7200 RPM 16 MB

HDS721032CLA362 320 GB 7200 RPM 16 MB

HDT721025SLA380 250 GB 7200 RPM 8 MB

HDS721025CLA382 250 GB 7200 RPM 8 MB

HDP725025GLA380 250 GB 7200 RPM 8 MB

HITACHI

Western Digital

HDT721010SLA360 1 TB 7200 RPM 16 MB

WD10EACS 1 TB 7200 RPM 16 MB

WD5000AACS 500 GB 7200 RPM 16 MB

WD2500AAKS 250 GB 7200 RPM 16 MB

<NOTICE> The brands and models of all HDD should be the same. If the brands and models of each HDD

are different with others, the DVR may not recognize HDD.

INDEX

1. NAME & FUNCTION ..................................................................................................... 14

1-1. Front panel ...............................................................................................................................................14

1-2. Remote control ........................................................................................................................................ 15

1-3. Rear panel and connection..................................................................................................................... 16

1-4. Selecting the type of monitor (TV monitor and VGA monitor)............................................................19

2. SETTING UP THE DVR................................................................................................. 20

2-1. Setup – Main Screen ...............................................................................................................................20

2-2. Setup – Display Mode .............................................................................................................................22

2-3. Setup – Recording Mode ........................................................................................................................24

2-3-1. Recording Schedules .......................................................................................................................... 26

2-4. Setup – Device Mode............................................................................................................................... 26

2-4-1. ALARM-OUT.......................................................................................................................................... 28

2-4-2 PTZ Setup............................................................................................................................................... 28

2-4-3. Motion Zone Setup ............................................................................................................................... 29

2-5. Setup – Storage Mode............................................................................................................................. 30

2-6. Setup – System Mode .............................................................................................................................31

2-7. Setup – SECURITY Mode ........................................................................................................................34

2-8. Setup – Network Mode ............................................................................................................................36

2-8-1. Ports ......................................................................................................................................................37

2-8-2. Network Types...................................................................................................................................... 38

2-8-2-1. LAN..................................................................................................................................................... 38

2-8-2-2. DHCP ..................................................................................................................................................39

2-8-2-3. ADSL (PPPoE) ...................................................................................................................................39

2-8-3. Saving Setup of Network setup ..........................................................................................................39

2-9. Setup - CONFIG Mode .............................................................................................................................40

3. SAVING SETUP ............................................................................................................ 42

4. LIVE, SEARCH, AND PLAYBACK................................................................................ 42

4-1. Live Viewing Screen................................................................................................................................ 42

4-2. SEARCH Screen ...................................................................................................................................... 45

4-2-1. TIME-LINE Search ................................................................................................................................ 46

4-2-2. Event Search......................................................................................................................................... 46

4-2-3. Go To First Time................................................................................................................................... 47

4-2-4. Go To Last Time ...................................................................................................................................47

4-2-5. Go To Specific Time............................................................................................................................. 47

4-2-6. Log Search............................................................................................................................................ 48

4-2-7. Archive Search ..................................................................................................................................... 48

4-3. Play mode................................................................................................................................................. 49

5. PTZ CONTROL ............................................................................................................. 50

6. BACK UP ......................................................................................................................52

6-1. Still Image backup onto USB flash memory .........................................................................................52

6-2. Video backup onto USB flash memory ................................................................................................. 52

6-3. Transferring still images or video from the ARCHIVE list...................................................................53

6-4. Playback of Backup Video...................................................................................................................... 54

7. UPGRADING FIRMWARE ............................................................................................ 55

8. NETWORK ACCESS USING THE EXCLUSIVE NETWORK VIEWER ........................ 56

8-1. PC requirements...................................................................................................................................... 56

8-2. Installing the network viewer .................................................................................................................56

8-3. Live monitoring mode and functions. ...................................................................................................57

8-4. Bi directional audio .................................................................................................................................59

8-5. Remote search mode and functions .....................................................................................................59

8-6. PC System configuration........................................................................................................................ 62

9. NETWORK – BY AN WEB-BROWSER VIEWER .........................................................64

10. NETWORK – BY MOBILE PHONE VIEWER.............................................................. 66

APPENDIX: HOW TO CONNECT NETWORK..................................................................68

A. How to set IP address of the DVR and open TCP port of the router? .................................................. 68

B. How to access DVR from Remote PC? .................................................................................................... 70

1. NAME & FUNCTION

1-1. Front panel

ཛ

SEQ: To start auto sequencing of the screen in full screen mode. (Toggle)

ཛྷ

PTZ: To control PTZ operation

ཝ

SETUP: To launch SETUP menu.

ཞ

CAPTURE: To start operations of backup in live or playback mode.

ཟ

SEARCH: To go to the search menu.

འ

REC: To start and stop manual recording.

ཡ

PLAY/PAUSE: To play or to pause the footage in playback mode.

ར

REW: To rewind the footage at 1x, 2x, 4x, and 8x speed during playback.

ལ

F/REW : During playback - To move the playback position 60 seconds backward.

During pause - To move the playback position 1 frame backward.

ཤ

F/ADV: During playback - To move the playback position 60 seconds forward.

During pause - To move the playback position moves 1 frame forward.

ཥ

FF: To fast forward the footage at 1x, 2x, 4x, and 8x speeds during playback.

ས

USB port: To connect USB Thumb drive to backup data.

ཧ

HDD: The indicator blinks during recording and playback.

ཨ

POWER: The indicator blinks when the AC adaptor is connected.

Direction button

During setting

ཁ

To move the cursor Upward. ག To move the cursor to the Right or to change the setting values.

གྷ To move the cursor Down. ང To move the cursor to the Left or to change the setting values.

During Live/playback & Entering password

ཁ To select camera 1 or To enter No. 1 ག To select camera 2 or To enter No. 2.

གྷ

To select camera 3 or To enter No. 3. ང To select camera 4 or To enter No. 4.

ཅ

To select full screen or quad screen view in live/playback or To select desired menu item or to store the setup value.

ཆ To return to previous menu screen or To exit from playback.

1-2. Remote control

ཛ ID: When a remote control ID number is set in DVR, press it before number.

ཛྷ REC:

To start and stop manual recording.

ཝ Number: To select channel (1, 2, 3, & 4) or to enter DVR ID number.

ཞ F/REW:

ཟ F/ADV:

འ REW:

ཡ PLAY/PAUSE:

ར FF:

During playback - To move the playback position 60 seconds backward.

During pause - To move the playback position 1 frame backward.

During playback - To move the playback position 60 seconds forward.

During pause - To move the playback position moves 1 frame forward.

To rewind the footage at 1x, 2x, 4x, and 8x speed during playback.

To play or to pause the footage in playback mode.

To fast forward the footage at 1x, 2x, 4x, and 8x speeds during playback.

ལ Control button: Press to move the menu items or select channel.

ཤ SETUP:

ཥ SEARCH:

ས ESC:

ཧ BACKUP:

front panel of DVR.)

ཨ SEQ:

To launch SETUP menu.

To go to the search menu.

During setting - To return to previous menu screen.

During playback - To exit from playback.

To start operations of backup in live or playback mode. (The same function button as CAPTURE on the

To start auto sequencing of the screen in full screen mode. (Toggle)

 Operation range

30° 30°

1-3. Rear panel and connection

1-3-1. Basic connections

z Do not power this system on before all the connections are completed.

z Make sure all the connections are properly. Faulty connection may result in the system being damaged.

z The DC plug of the AC adaptor is easy to be unplugged. Please make sure that the plug is removed.

4CH

8CH

16CH

ཛ Cooling fan

ཛྷ AUDIO IN: Audio input terminal (* Use the audio cable which is provided with the 16ch dvr package)

ཝ AUDIO OUT: Audio output terminal (* Use the audio cable which is provided with the 16ch dvr package)

ཞ VIDEO IN: Video input terminal

ཟ VIDEO OUT: Video output terminal

འ VGA: VGA (Video Graphics Array) output terminal. Connects to the PC VGA monitor.

ཡ ETHERNET: Network terminal

ར SENSOR IN & ALARM OUT: External sensor terminal & External alarm out terminal

ལ RS-485

ཤ TERMINATION ON/OFF: Termination ON/OF switch

CVBS/VGA: System video output format switch

ས POWER: DC12V input terminal

1-3-2. Network connections

 LAN Connection – Using the cross cable, without a switching hub

Connect to the system directly, using a cross type network cable

Cross type cable

 LAN Connection – Using a switching hub

Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-

T/100BASE-TX CAT 5 LAN cable)

IP Router or HUB

 Internet (ADSL) Connection

Connect to the system, using an Router or ADSL modem and an Ethernet cable (10BASE-

T/100BASE-TX CAT 5 LAN cable)

ADSL Modem

IP Router or HUB

NOTICE

If you have a IP line with one IP address (whether it is dynamic IP or fixed IP), but you have more than

one internet device (such as PC/PCs and a DVR); to use Router (It is different from a simple Network

Hub); you must set up the Router to work with DVR; and you must use a network capable PC within the

local Router network to do the setup. Whether you are using an existing Router or a new Router, you

must go through the Port Forwarding portion of the setup.

1-3-3. Sensor and alarm connections

Internet

SENSOR INPUT: Connect two signal lines of sensor (infrared ray sensor, heat perception sensor, magnetic

sensor) to the desired sensor number.

NOTICE

SENSOR inputs need dried contact only. Do not input any electric signal.

---: Not operational

N/O: Normally open type sensor. When magnetic sensor is closed, sensor sends a signal.

N/C: Normally closed type sensor. When magnetic sensor is opened, sensor sends a signal.

ALARM OUTPUT: Use Maximum current: 0.5A/125VAC, Maximum voltage: 1A/30VDC. When controlling

lamp and AC operated equipment, control it using separate outside relay. During normal operation the control

output contact is maintained at “Open” status, and during control output the output contact is changed to

Closed(short)” status.

1-4. Selecting the type of monitor (TV monitor and VGA monitor)

1-4-1. CVBS: Select CVBS to connect general TV monitor

1-4-2. VGA: Select VGA to connect computer VGA monitor

z The general TV monitor terminal and the computer VGA monitor terminal can not be used simultaneously.

2. Setting up the DVR

The following sections detail the initial setup of a DVR.

2-1. Setup – Main Screen

To enter the setup menu, select MENU and SETUP on the screen using the mouse or press the SETUP

button on the front panel. Then select a user type. User can select one of user types (ADMIN, USER1,

USER2, USER3) using the control button (

ൖ Ÿ൘ ź) on the front panel and press SEL button.

Then password input screen will be displayed. User can select a password using the control button

ൖ Ÿ൘ ź) and select OK to enter the setup menu. The factory default password is 11111111.

(

It is highly recommended to assign a new password to protect the system. User can assign a new password

in SECURITY setup menu.

 DISPLAY

–OSD

– SEQUENCE

– SEQ-DWELL TIME

– OSD CONTRAST

– CHANNEL

 RECORD

– RESOLUTION

– CHANNEL

Table 2.1.1. Setup menu tree

-NAME

- COVERT

- BRIGHTNESS

-CONTAST

- HUE

- SATURATION

- FRAME RATE

-QUALITY

- RECORDING

- ELECTRIC LIGH CONTROL

- SENSOR RECORDING

- PRE RECORD

- POST EVENT RECORD

- AUDIO

- SCHEDULE

 DEVICE

– ALARM OUT

–PTZ

– CHANNEL

- MOTION ZONE

- MOTION SENSITIVITY

– KEY TONE

– REMOTE CONTROL ID

– SENSOR

- TYPE

 STORAGE

– OVERWRITE

– DISK FORMAT

– DISK INFO

– RECORDING LIMIT

– RECORDING LIMIT DAYS

 SYSTEM

– DVR-ID

– DESCRIPTION

– LANGUAGE

– DATE FO R MAT

– SET DATE & TIME

– CLIENT ACCESS

– BANDWIDTH SAVING

– SEND EMAIL

–NTP

 SECURITY

– USER AUTHENTICATION (ADMIN, NETWORK, USER1, USER2, USER3)

– USER PASSOWRD

 NETWORK

–PORT

– WEB PORT

– NETWORK TYPE (LAN, DHCP, ADSL)

– DDNS

- DDNS SERVER NAME

- DDNS INTERVAL

 CONFIG

– SAVE SETUP TO A USB

– LOAD SETUP FROM A USB

– LOAD DEFAULT

– LOAD FACTORY DEFAULT

2-2. Setup – Display Mode

Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select

DISPLAY icon and press SEL button to enter the setup menu item. Navigate through the menu items using

the control button (

ൖ Ÿ൘ ź). To return to setup menu screen, press the ESC button.

(

ൖ Ÿ൘ ź) and change the value of the menu item using the control button

+ 51 hidden pages

Clover Electronics CDR 0440 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual