Clover CW5700TX, CW5700RX Quick Setup Manual

WIRLESS CAMERA-CW5700TX

1. POWER JACK

Plug the supplied AC adapter (DC 15V 250mA).

2. ANTENNA

Sends audio and video signals.

3.CHANNEL
SELECTION BUTTON

Must select the same channel on both transmitter and receiver. Press the button to

select a channel and the corresponding red LED on the front will be lit.

4. IR LED

Automatically turns on at night to view objects in darkness.

5. Mounting bracket

Install the mounting bracket on the wall or ceiling where you want to.

6. C-MIC

High sensitivity condenser microphone.

WIRELESS RECEIVER-CW5700RX/USB DVR

1. ANTENNA

Receives the audio and video signals.

2. USB indicator

The blue LED is lit when the receiver is connected to computer with USB cable.

3. POWER INDICATOR

The red LED is lit when the power is on.

4. AUTO SWITCHING INDICATOR

The green LED is lit when in the sequencing mode.

5. CH 1

The blue light is lit when CH1 has been selected.

6. CH 2

The blue light is lit when CH2 has been selected

7. CH3

The blue light is lit when CH3 has been selected.

8. CH4

The blue light is lit when CH4 has been selected.

9. MOUNTING BRACKET

For the receiver to stand.

10. POWER ON/OFF SWITCH

Switch for the power On/Off.

11. DC IN

Plug the 8V adapter (Supplied) 12. A/V (AUDIO/VIDEO) OUTPUTJACK
Connect the supplied A/V cable to the jack. Plug the yellow.
colored RCA to the VIDEO IN on the monitor / TV and the white colored RCA to the