Clover CDR-1650 Instruction Manual
Contents
1
INSTRUCTION MANUAL
Stand-Alone 16 Channel
DIGITAL VIDEO RECORDER
MODEL CDR1650
Copyright © 2008 Clover Electronics U.S.A. All Rights Reserved.
2
Contents
3
CONTENTS
ABOUT THIS MANUAL .......................................................................................................................... 9
1. UNPACKING ..................................................................................................................................... 11
S
TAN D-ALONE DVR (DIGITAL VIDEO RECORDER) UNIT................................................................... 12
2.FEATURES ......................................................................................................................................... 13
3.WHAT TO DO AT THE TIME OF INSTALLATION ........................................................................... 15
4.SPECIFICATIONS .............................................................................................................................. . 17
5. INSTALLATION ............................................... ................................................................................. 19
5-1.
CONTROLS AND CONNECTORS (FOR 8CH & 16CH DVR) ........................................................ 20
5-2.
NOTE FOR INSTALLATION ....................................................................................................... 22
5-3.
SYSTEM CONNECTION ........................................................................................................... 23
5-4.
INSTALLATION ........................................................................................................................ 24
5-4.1. Camera Connection .................................................................................................................... 24
5-4.2. Monitor Connection ..................................................................................................................... 24
5-4.3. Sensor Connection and RELAY IN &OUT ................................................................................... 26
5-4.4. RS232C,RS485, RS422 Connection .......................................................................................... 28
5-4.5 Connection to an Ethernet (Optional) Network ............................................................................. 29
5-4.6. POWER CONNECTION ............................................................................................................. 30
6.HOW TO OPERATE .......................................................................................................................... 31
6-1.
GENERAL INFORMATION ......................................................................................................... 33
6-2.
OPERATING INTERFACE ......................................................................................................... 34
6-3.
IR REMOTE CONTROLLER ...................................................................................................... 35
6-4.
POWER ON/OFF .................................................................................................................... 36
6-4.1. POWER ON ................................................................................................................................ 36
6-4.2. POWER OFF .............................................................................................................................. 36
6-4.3. APPEARANCE OR DISAPPEARANCE OF POWER BUTTON .................................................. 37
6-5.
MENU BAR ON/OFF ............................................................................................................... 38
6-6.
DISPLAY SCREEN .................................................................................................................. 39
6-6.1. FULL SCREEN ........................................................................................................................... 39
Stand-alone DVR Instruction Manual
4
6-6.2. SPLIT SCREENS ........................................................................................................................ 40
6-7.
LIVE .................................................................................................................................... 41
6-7.1. FULL SCREEN ........................................................................................................................... 41
6-7.2. SPLIT SCREEN .......................................................................................................................... 41
6-7.3. SEQUENCING SCREENS .......................................................................................................... 42
6-7.4. LIVE AUDIO ................................................................................................................................ 43
6-7.5. ZOOM ......................................................................................................................................... 44
6-7.6. OSD ON / OFF ............................................................................................................................ 45
6-7.7. PAN / TILT ................................................................................................................................... 46
6-7.8. SYSTEM STATUS ....................................................................................................................... 49
6-7.9. POWER LOSS LISTS ................................................................................................................. 50
6-7.10. VIDEO LOSS LIST .................................................................................................................... 52
6-8.
RECORD ............................................................................................................................... 54
6-8.1. Manual (Continuous) recording ................................................................................................... 54
6-8.2. Manual Event Recording ............................................................................................................. 54
6-8.3. Timer Recording .......................................................................................................................... 55
6-8.4. Timer Event Recording................................................................................................................ 56
6-8.5. Recording Icons .......................................................................................................................... 57
6-9.
REPLAY .............................................................................................................................. 58
6-9.1. QUICK REPLAY .......................................................................................................................... 58
6-9.2. REPLAY ...................................................................................................................................... 58
6-9.2.1. Playback Devices ................................................................................................................. 59
6-9.2.2. Set the Start Time ................................................................................................................. 59
6-9.2.3. Replaying ............................................................................................................................. 61
6-9.2.4. Disappearance of Replay control buttons ............................................................................ 63
6-10.
COPY ................................................................................................................................ 65
6-10.1. Copying devices ........................................................................................................................ 65
6-10.2. Set the Copy Start Time (Copying extent) ................................................................................. 66
6-10.3. Set the Copy End Time (Copying extent) .................................................................................. 68
6-10.4. Copying the recorded data during replaying ............................................................................. 69
7.SETUP ................................................................................................................................................ 73
7-1.
SETUP ................................................................................................................................ 76
7-2.
SYSTEM ............................................................................................................................. 77
Contents
5
7-2.1. TIME / DATE ............................................................................................................................... 78
7-2.2. SYSTEM CONFIG ...................................................................................................................... 80
7-2.2.1. FACTORY DEFAULT ........................................................................................................... 80
7-2.2.2. LOAD CONFIG / BACKUP CONFIG .................................................................................... 81
7-2.3. PASSWORD ............................................................................................................................... 83
7-2.4. IR REMOTE ID ........................................................................................................................... 84
7-2.5. FIRMWARE UPDATE ................................................................................................................. 85
7-2.6. SYSTEM INFO ............................................................................................................................ 85
7-3.
DISK MANAGER ................................................................................................................ 86
7-3.1. HDD WRITE FAIL ....................................................................................................................... 87
7-3.2. HDD OVERWRITE ...................................................................................................................... 87
7-3.3. Format ......................................................................................................................................... 87
7-4.
CAMERA ............................................................................................................................. 89
7-4.1. Camera ON/OFF ......................................................................................................................... 90
7-4.2. Camera Name (Camera Title) ..................................................................................................... 90
7-4.3. Buzzer ......................................................................................................................................... 91
7-4.4. Relay ........................................................................................................................................... 91
7-4.5. Pan/Tilt Settings .......................................................................................................................... 92
7-4.6 Display ......................................................................................................................................... 96
7-4.7 Sequencing dwell time ................................................................................................................. 96
7-5.
AUDIO ................................................................................................................................. 97
7-5.1. Audio Recording ON/OFF ........................................................................................................... 97
7-5.2. Microphone Volume .................................................................................................................... 97
7-6.
RECORD ............................................................................................................................ 98
7-6.1. Record ICON Display .................................................................................................................. 98
7-6.2. All Manual / Timer recording button ............................................................................................. 99
7-6.3. All Motion ON / OFF, Sensitivity and Velocity Setting ................................................................ 100
7-6.4. All Sensors ON / OFF................................................................................................................ 101
7-6.5. Size (Recording Resolution) ..................................................................................................... 101
7-6.6. Recording Speed ...................................................................................................................... 102
7-6.7. Recording Quality ..................................................................................................................... 103
7-6.8. Recording Mode ........................................................................................................................ 104
7-6.8.1. Manual Recording .............................................................................................................. 104
7-6.8.2. Manual Event Recording .................................................................................................... 104
Stand-alone DVR Instruction Manual
6
7-6.8.3. Timer Recording (Schedule Recording) ............................................................................. 104
7-6.8.4. Timer Event Recording ....................................................................................................... 104
7-6.9. Recording by Motion Detection ................................................................................................. 105
7-6.10. Recording by Sensor (PIR Sensor) ......................................................................................... 113
7-7.
NETWORK ........................................................................................................................ 116
7-7.1. IP Mode ..................................................................................................................................... 116
7-7.2. GATEWAY, SUBNET, IP ADDRESS .......................................................................................... 117
7-7.3. Port ........................................................................................................................................... 118
7-7.3.1 Port Forwarding .................................................................................................................. 118
7-7.4. MAC ID ..................................................................................................................................... 119
7-7.5. MNS (MAC NAME SERVER) .................................................................................................... 119
7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM) .......................................................................... 121
7-7.7. HOW TO SETUP AND USE THE DDNS ................................................................................... 123
7-7.7.1. Router. ............................................................................................................................... 123
7-7.7.2. Registration to the DDNS server ........................................................................................ 123
7-7.8. EMAIL NOTIFICATION ............................................................................................................. 124
7-8.
VIDEO ENHANCE ............................................................................................................ 127
7-8.1. VIDEO ENHANCEMENT ON EACH CAMERA ......................................................................... 128
7-8.2. VIDEO ENHANCEMENT ON VGA OUTPUT ............................................................................ 129
8.REMOTE HOST PROGRAM .............................................................................................................. 131
8-1.
REMOTE PROGRAM OVERVIEW ............................................................................................ 133
8-2.
INSTALLING THE PROGRAM TO PC ........................................................................................ 134
8-3.
INTERNET EXPLORER .......................................................................................................... 135
8-4.
REMOTE HOST .................................................................................................................... 137
8-4.1. Setup......................................................................................................................................... 139
8-4.2. Connection ................................................................................................................................ 141
8-4.3. Capture ..................................................................................................................................... 142
8-4.4. Status ........................................................................................................................................ 143
8-4.5. Replay ....................................................................................................................................... 144
8-4.6. COPY ........................................................................................................................................ 146
8-4.7. Switch the Normal Screen to Full Screen .................................................................................. 148
8-4.8. Speaker / Microphone ............................................................................................................... 149
8-4.9. Connection mode ...................................................................................................................... 150
Contents
7
8-4.9.1. Terminal mode.................................................................................................................... 150
8-4.9.2. Multi mode ......................................................................................................................... 151
8-4.10. Copy in the Terminal mode ..................................................................................................... 152
8-4.11 E-Map ....................................................................................................................................... 154
8-4.10.1. Addition of map ................................................................................................................ 154
8-4.10.2. Placement of cameras on the map .................................................................................. 155
8-4.10.3. Usage of camera position ................................................................................................ 156
8-4.10.4. Deletion of Camera position icon ..................................................................................... 156
8-4.12 Pan / Tilt & Preset .................................................................................................................... 157
8-5.
PLAYER ............................................................................................................................ 158
9.INSTALLATION OF ADDITIONAL HDDS ........................................................................................ 165
9-1.
HDD (HARD DISK DRIVE) INSTALLATION .......................................................................... 166
9-2.
INSTALLATION OF AN ADDITIONAL HDD .................................................................................. 167
APPENDIX ........................................................................................................................................... 169
R
ECORDING TIME TABLE ............................................................................................................. 170
F
ACTORY DEFAULT SETTINGS ...................................................................................................... 171
FAQ ..................................................................................................................................................... 175
I
CAN NOT LOGIN ........................................................................................................................ 176
LIMITED 2YEAR WARRANTY ............................................................................................................ 177
HOW TO OBTAIN FACTORY SERVICE .............................................................................................. 178
Stand-alone DVR Instruction Manual
8
9
About this manual
This is the Instruction Manual for Stand-alone type DVR model CDR1650.
This Manual describes how to install and operate the Stand-Alone DVR and provides
specifications and features.
Please read this manual thoroughly and follow the installation process before using Stand-
alone DVR (Note: Be sure to correctly follow step 3. What to do at the time of installation).
Contact our dealers when you have any queries.
Stand-alone DVR Instruction Manual
10
11
1. Unpacking
Care should be taken when unpacking to avoid damaging the unit.
Please check that the following items are included:
▶ Stand-alone DVR unit
▶ All Accessories : Bracket, Power Cable, Screws
▶ Remote Controller & Battery
▶ PS2 Mouse
▶ DSUB 26p Connector (Sensor Input, Relay Output Selection)
▶ Instruction Manual
▶ Host Program (DVR Master) on CD
▶ RJ-45 Cable
Note: Contact your dealer immediately if any components are missing.
1
Stand-alone DVR Instruction Manual
12
Stand-alone DVR (Digital Video Recorder) Unit
CDR1650 is the most reliable and functional embedded DVR system available today. The system
displays 16 channels of live images in Real Time speed, compresses data digitally and records
them to the Hard Disk Drive, which can be replayed and searched easily any time.
The CDR1650 supports easy back up via USB port, DVD R/W, CD R/W and networking in both
static & dynamic IP modes.
User can remotely view live images or search the recorded images.
Under emergency situation, the remote operator can control, turn on and turn off the field
installed alarms, such as a siren or light.
It is a very user- friendly DVR system. User can control the CDR1650 by Mouse or Buttons on
the front panel or Remote controller.
13
2.Features
▶ Multi Functional Record
- Powerful, multiple Record Modes available: Manual (Continuous), Timer, and Motion
Detection Recording.
▶ User friendly GUI
- A few simple buttons for Easy control.
▶ Automatic System Recovery
- Automatic and Complete System recovery within 10 seconds.
▶ Easy PTZ control via RS port
- No need to use PTZ controller
- PTZ control from remote PC
▶ Networking
- DHCP based automatic network set-up-Easy Network Configuration from Dynamic IP to
Dynamic IP
- Up to 10 users can remote access the system through DvrMaster (GUI) or Internet Explorer
simultaneously.
- DDNS support
▶ MPEG-4 Algorithm Compression
- The most advanced compression available today.
▶ Multiple Video Display
- Support CCTV monitor or TV and High resolution video display by VGA monitor.
▶ High Resolution
- Real time display 480 Frames/sec.
- Recording speed 480 Frames/sec based on 360x240.
- Programmable display resolution and recording speed on each channel.
▶ 2 Way Audio
- Communicate between the DVR system and client computer through the Internet.
▶ Easy Data Playback in any PC
- Back Up data convertible to AVI file format.
▶ Back UP
- DVD R/W, CD R/W, External HDD, Stick memory, and through network access.
▶ Jog/Shuttle
- Frame by frame playback/playback / Control the playback speed for both forward and
reverse by turning the shuttle to left or right.
2
Stand-alone DVR Instruction Manual
14
15
3.What to do at the time of
Installation
Stand-alone DVR should be installed in the following order;
1. Make sure all the required hardware is available.
- Stand-alone DVR unit (including HDD)
- Up to 16 cameras (including power source)
- CCTV or VGA monitor (or TV set)
- Network cable if connecting to a PC
2. Connect the cameras, the DVR unit and monitor (Refer to [Fig 5-3]).
4. Confirm live video is displayed on the monitor before going to the next step.
5. Select the Setup Menu and set current date and time (Refer to Section 7-2.1 on page 78).
6. Run the FACTORY DEFAULT setting in the SYSTEM menu.
7. Perform HDD formatting.
8. Escape from Setup Menu.
9. Set values for required options.
10. Network cable should be connected to the DVR unit before turning the power on.
Refer to [Fig 5-9] for the cable specification.
3
Stand-alone DVR Instruction Manual
16
17
4.Specifications
[Fig 4-1. Specifications]
Design and the specifications are subject to change without notice.
4
Stand-alone DVR Instruction Manual
18
19
5. Installation
CONTENTS
5-1. CONTROLS AND CONNECTORS (FOR 8CH & 16CH DVR) ......................................................... 20
5-2.
NOTE FOR INSTALLATION ........................................................................................................ 22
5-3.
SYSTEM CONNECTION ........................................................................................................... 23
5-4.
INSTALLATION ........................................................................................................................ 24
5-4.1. Camera Connection .................................................................................................................... 24
5-4.2. Monitor Connection ..................................................................................................................... 24
5-4.3. Sensor Connection and RELAY IN &OUT .................................................................................. 26
5-4.4. RS232C,RS485, RS422 Connection .......................................................................................... 28
5-4.5 Connection to an Ethernet (Optional) Network ............................................................................ 29
5-4.6. POWER CONNECTION ............................................................................................................. 30
5
Stand-alone DVR Instruction Manual
20
5-1. Controls and Connectors (For 8Ch & 16Ch DVR)
z Front
- A
a. 1 Channel(FULL Screen)
b. 2 Channel(FULL Screen), UP Key
c. 3 Channel(FULL Screen)
d. 4 Channel(FULL Screen)
e. 5 Channel(FULL Screen), LEFT Key
f. 6 Channel(FULL Screen), ENTER Key
g. 7 Channel(FULL Screen), RIGHT Key
h. 8 Channel(FULL Screen)
i. 9 Channel(FULL Screen)
j. 10 Channel(FULL Screen), DOWN Key
k. 11 Channel(FULL Screen)
l. 12 Channel(FULL Screen)
m. 13 Channel(FULL Screen)
n. 14 Channel(FULL Screen)
o. 15 Channel(FULL Screen)
p. 16 Channel(FULL Screen)
q. MENU
[Fig 5-1. Front View]
A
B
USB
POWER
DVD R/W
HDD LED
LINK LED
DATA LED
JO
G
SHUTTL
E
IR Reciver
5. Installation
21
- B
z Rear
a. Display (Full / Split)
b. Emergency Record
c. Zoom
d. Quick Replay
e. OSD On/Off
f. Audio
g. Stop (ESC)
h. PTZ
CAMERA INPUT
VOLTAGE SELECT
POWER INLET
RS-422C POR
T
USB POR
T
ETHERNET POR
T
SENSOR IN/OU
T
VGA
SPEAKER
AUDIO INPU
T
LOOP
OUT INPUT
MAIN VIDEO INPU
T
AUX VIDEO INPU
T
[Fig 5-2. Rear View]
Stand-alone DVR Instruction Manual
22
5-2. Note for Installation
Install the system according to the instructions described in this manual.
This product is designed for indoor use and should not be used outdoors.
Avoid any area with high humidity or dust which can shorten lifetime of the unit.
Choose a well ventilated area and keep minimum of 10” away from obstructions. Do not
place the unit near heat generating devices. Do not place items on top of the unit.
Avoid any area with movement as this can interfere with the internal Hard Drive.
Use a compatible input/output signal type of cameras and monitor.
Contact your dealer if you are having any difficulty.
The Warranty may be voided in case of unauthorized disassembling, abuse or modification.
5. Installation
23
5-3. System Connection
[Fig 5-3. System Connection]
Stand-alone DVR Instruction Manual
24
5-4. Installation
5-4.1. Camera Connection
▫ Connection of Normal Cameras
Connect the cameras to the Video Input (BNC connector) on the back of the unit as shown
above [Fig. 5-3 System Connection].
▫ Connection of Loop Output
The Camera or video output is available from the Video Output (Loop Output) on the back of
the unit. (When BNC jack is connected to the Video Output, the termination resistance (75Ω)
is automatically switched to impedance status so the external device must have termination
resistance.)
5-4.2. Monitor Connection
▫ Connection of Main Monitor
Connect the composite monitor to "Main" on the upper part of BNC connector
▫ Connection of Auxiliary Monitor
Connect the auxiliary monitor to "Aux" on the lower part of BNC connector. The output of
auxiliary monitor port is the same as the main monitor.
5. Installation
25
▫ VGA Monitor Connection
Connect the VGA Monitor’s connector to the “DSUB 15 Pin Connector” on the rear of the unit.
Output for VGA Monitor is the same as that of the main monitor, however it outputs a better
quality signal.
Pin configuration of VGA Connector.
[Fig 5-4. VGA Connector PIN]
-
Number Description Number Description
1 R(75Ω, 0.7Vp-p) 9 N/C
2 G(75Ω, 0.7Vp-p) 10 GND
3 B(75Ω, 0.7Vp-p) 11 GND
4 N/C 12 N/C
5 GND 13 HSYNC
6 GND 14 VSYNC
7 GND 15 N/C
8 GND
Stand-alone DVR Instruction Manual
26
-
5-4.3. Sensor Connection and RELAY IN &OUT
▫ SENSOR Connection (SENSOR IN)
Connect the sensor to ALM (SENSOR) IN. The Sensor should be a contactor type and support
NO (Normal Open).
[Fig 5-5. SENSOR IN/OUT PIN]
●
Pin 1 Sensor 1
●
Pin 2 Sensor 2
●
Pin 3 Sensor 3
●
Pin 4 Sensor 4
●
Pin 5 Sensor 5
●
Pin 6 Sensor 6
●
Pin 7 Sensor 7
●
Pin 8 Sensor 8
●
Pin 9 Sensor 9
●
Pin 10 Sensor 10
●
Pin 11 Sensor 11
●
Pin 12 Sensor 12
●
Pin 13 Sensor 13
●
Pin 14 Sensor 14
●
Pin 15 Sensor 15
●
Pin 16 Sensor 16
▩
Pin 17 Common
▩
Pin 18 Common
▨
Pin 19 Relay out 1
○
Pin 20 Relay out 1 Common
▨
Pin 21 Relay out 2
○
Pin 22 Relay out 2 Common
▨
Pin 23 Relay out 3
○
Pin 24 Relay out 3 Common
▨
Pin 25 Relay out 4
○
Pin 26 Relay out 4 Common
5. Installation
27
▫ RELAY OU T Connection
When necessary, use RELAY OUT. The Output of RELAY OUT is a relay contactor type and
supports NO (Normal Open) & NC (Normal Close). The Output capacity is 220V 1A. A higher
capacity can cause system failure.
[Fig 5-6]
Stand-alone DVR Instruction Manual
28
5-4.4. RS232C,RS485, RS422 Connection
▫ Connect the cable to the “RS232C/RS485/RS422 PORT” on the rear of the unit.
Specification of the RS232C/RS485/RS422 connector is standard for “DSUB9”
The Maximum Length of cable is 45 ft with RS232C but RS485 or RS422 is about 300ft.
[Fig 5-7]
[Fig 5-8]
5. Installation
29
5-4.5 Connection to an Ethernet Network
▫ Connecting the cable to Ethernet.
Our Ethernet connector is a RJ45 type. The maximum cable length is 300 ft. When you want
to use a longer cable, we suggest using repeater.
[Fig 5-9]
Stand-alone DVR Instruction Manual
30
5-4.6. POWER CONNECTION
Select proper voltage (see fig 5-10) and connect to a reliable power source.
It should not be shared with other electrical equipment on the same line.
Poor performance can occur if the connected voltage is more than 10% plus or minus the
required voltage.
Frequent power cuts can cause crucial failures, so if you have an unstable power source we
recommend the use of an Uninterrupted Power Supply or other backup power source.
AC Input Voltage is AC110V 50/60Hz or AC220V 50/60Hz. AC power Source vary depends
on countries. Factory default setting is AC110V 50/60Hz.
Note: Before you input the AC power to the system, make sure that the selector
switch conforms to the correct input voltage.
[Fig 5-10 Input power selection]
Loading...