Clover B14A, B14B, b9a, b9b Service Manual

TABLE OF CONTENTS

1. SPECIFICATION & PARTS

IDENTIFICATION .............................................................................3

2. OPERATION & FUNCTION OF

PARTS....................................................................................4, 5

A. Cooling Operation

B. Heating Operation

C. Function of Parts

3. LOCATION

REQUIREMENTS.......................................................................................................5

4. INSTALLATION PROCEDURES ..............................................................................................5,

6

5.

STORAGE.......................................................................................................……………………..6

6. CLEANING ..................................................................................................…………………….6,

7

7. TROUBLESHOOTING GUIDE..............................................................................………..…....7,

8

8. WIRING

DIAGRAM………………………….........................................................………..…….......9

9. EXPLODED VIEW & SERVICE PARTS LIST

A. B14A..................................................................................................................................10,

11

B. B14B.................................................................................................................................12, 13

FOR YOUR SAFETY

Please read the following safety precaution before servicing the watercooler.

1) Check if an electric leakage occurs in the appliance.

2) To prevent electric shock, unplug prior to servicing.

3) In case of testing with power on, wear rubber gloves to prevent electric shock.

4) When using an instrument or replacing a part for repairing, check it is applied to

rated voltage current and capacity.

5) Prevent water from flowing into electric elements in mechanical parts.

6) When carrying or tilting the appliance, remove all the objects on it.

7) If the cooling cycle is out of order, contact nearest authorized service center for

maintenance, repair and adjustment.

1. SPECIFICATION & PARTS IDENTIFICATION

MODEL

B14A(HOT & COLD)

B14B(COOK & COLD)

DIMENSION

313W×323D×963H(mm)

WEIGHT

16kg

17kg

CONSUMPTION

105W

TEMP CONTROL

AUTO

TANK

Stainless Steel

COLD

CAPACITY

3.0 /h (10℃)

CONSUMPTION

405W/465W

PROTECTOR

Heat Limiter

TEMP. CONTROL

Hot Control

TANK

Stainless Steel

HOT

CAPACITY

7.5 /h (85)

ELECTRICAL

220-240V, 50/60Hz. 110-127V, 50/60Hz.

Check the available power supply against the watercooler data plate to assure correct electrical service.

2. OPERATION & FUNCTION OF PARTS

A. Cooling Operation

The vapor refrigerants that compressed to high temperature & high pressure conditions in the

compressor, turn into liquid refrigerant of high temperature and high pressure passing through the

condenser, and then turn into the liquid refrigerants of low temperature and low pressure conditions by

passing through the capillary tubes. The liquid refrigerant of low temperature & low pressure absorbs

the surrounding heat while evaporating in the evaporator. Then, it is sucked in the compressor by

turning into saturated vapor.

B. Heating Operation

The electric heater inside of the hot water tank heats the supplied water. The temperature of hot