
The O - for volume, body and movement
Quick start
and safety
guide
UK

· Position The O pod on a flat surface. Plug into the mains power and turn on
using the power switch found at the rear of the pod
· The power indicator will glow and remain blue
· To heat your selected roller, carefully place it into The O pod, flat side down,
so the heat indication spot faces up
· The O pod will beep once and the ready indicator will flash green (4 times)
· Your roller will reach the optimum temperature within four seconds and the pod will beep 4 times when
the roller is ready for use, the ready indicator will remain green and the heat indication spot will glow red
· The O roller will be cool to touch. Remove the roller from The O pod and position in your hair.
· When the roller is removed from the pod and positioned in your hair it will continue to heat up until it
reaches full working temperature
· Repeat for each roller, leave to cool in your hair and lock in style.
· Once cool, the heat indication spot at centre of The O roller will turn black and can be removed from
your hair and reheated as needed
· When you have finished styling turn off using the power switch and unplug from the mains
View step-by-step looks and styling guides or watch exclusive video footage visit www.cloudninehair.com.
Using The O to create body, volume and movement