Cloud RL-1, RSL-4A, RL-1A, RSL-4, RSL-6 Installation Manual

RL-1, RSL-4, RSL-6 Installation Guide V1.0

1

RL-1, RL-1A, RSL-4, RSL-4A,

RSL-6, RSL-6A

Remote Control Plates

Installation Guide

RL-1, RSL-4, RSL-6 Installation Guide V1.0

2

RL-1, RSL-4, RSL-6 Installation Guide V1.0

3

Contents

Introduction ...................................................................4

Remote plate types ................................................................................. 5

Compatible Cloud products.................................................................. 6

Single and multi-channel operation ...................................................... 8

Device conguration ............................................................................... 9

Wiring details .........................................................................................11

CX163 stereo control options ........................................................... 13

Wiring diagrams ..................................................................................... 14

RL-1, RSL-4, RSL-6 Installation Guide V1.0

4

Introduction

Cloud RL and RSL remote control plates are accessories for a wide range

of Cloud zoners, mixer-ampliers and power ampliers. They are compatible

with all current (relevant) products, and also with numerous discontinued
products.

RL plates adjust the signal level in an audio channel of a Cloud device, and
thus allow audio volume in an area to be controlled locally.

RSL plates provide the same volume control function as RL plates,
but additionally allow remote selection of music source, when used in
conjunction with Cloud devices that have multiple line inputs.

RL-1, RSL-4, RSL-6 Installation Guide V1.0

5

Remote plate types

Functionally, there are three models of remote plate:

• RL-1: provides remote volume control of an audio channel.

• RSL-4: provides remote volume control of an audio channel, and also

remote selection of the music source for that channel, when
used with devices having up to four line inputs.

• RSL-6: as RSL-4, but for use with devices having up to six line inputs.

All three plates t standard UK-style single-gang electrical back boxes, either
surface-mounting or ush-tting. Recommended back box depth is 25 mm.
Two M3.5 x 20 xing screws are supplied with each plate.

US Versions:

The RL-1A, RSL-4A and RSL-6A are electrically and functionally identical,
but the faceplates have different physical dimensions (4.51”x 2.76”)
which allow them to be mounted into a standard US-style back box (with

vertical orientation). All information in this manual applies equally to both
mechanical versions.