3
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods
of time.
13. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Do not expose the apparatus to dripping or splashing, and ensure that no
objects lled with liquids, such as vases, are placed on the apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun
objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’appareil.
The mains plug is used as the disconnect device and it should remain readily
accessible during intended use. In order to electrically isolate the apparatus
from the mains, the mains plug should be completely removed from the mains outlet
socket.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible
pendant son utilisation. Pour être complètement déconnecté de l’alimentation
d’entrée, la prise doit être débranchée du secteur.
This apparatus is of Class I construction and must only be connected to a
mains outlet socket with a protective earthing connection.
Terminals marked with the ( ) symbol may use Class 2 Wiring, but voltages at
these terminals may be of sufcient magnitude to constitute a risk of electric
shock. The external wiring connected to these terminals requires installation by an
instructed person or the use of pre-made leads or cords.