Cloud CS-S SERIES Installation Manual

CS-S Series

Surface Mount Loudspeakers

CS-S4

4” SURFACE MOUNT LOUDSPEAKER

CS-S6

6.5” SURFACE MOUNT LOUDSPEAKER

Installation Guide

CS-S Series Installation Guide V1.1

CAUTION - Installation

Speaker must be installed by qualied speaker technician.

CAUTION - Servicing

Do not perform servicing unless you are qualied to do so. The unit contains no user-serviceable parts. Refer
servicing to qualied personnel.

CAUTION - Tap Switch

Before use check and set tap switch under grille to proper setting for your system.

EXPLODED VIEW

Snap fit Grille

Euro block

TAP SETTINGS

Port plug

Baffle

Bracket screws

Bracket

Ta p

1 16 ohm 16 ohm

2 X 32W 4W X 20W 2.5W

3 32W 16W 2W 20W 10W 1.3W

4 16W 8W 1W 10W 5W 0.6W

5 8W 4W 0.5W 5W 2.5W 0.3W

6 4W 2W 0.3W 2.5W 1.3W 0.2W

CS-S6 CS-S4

100 V 70 V 25 V 100 V 70 V 25 V

CS-S Series Installation Guide V1.12

INSTALLATION

Step 1

Remove speaker from box.

Step 2

Mount bracket to wall.

Step 4

Remove grille and set tap switch to proper setting.
Tap switch is preset to highest 100 V position.

Step 5

For increased weather resistance in outdoor applications,

press port plug into port on the bafe.

Step 3

Locate euroblock in accessory bag and connect signal wire.

For daisy-chaining use “LINK” output to run to next speaker.

Port plug

Step 6

Insert euroblock into rear of speaker.

CS-S Series Installation Guide V1.1 3

Step 7

Step 8

Slide speaker into bracket and tighten bracket screws.

Aim speaker and tighten bracket screws.

www.cloud.co.uk www.cloudusa.pro

CS-S Series Installation Guide V1.14