
CS-C6 6.5” In-Ceiling Loudspeaker
General Description
The Cloud CS-C6 is a 6.5 inch coaxial two way in-ceiling loudspeaker
featuring exceptional intelligibility and musical performance. Using
premium drivers and electronics, the CS-C6 offers high sensitivity,
smooth frequency response, and excellent off axis performance. The
6.5 inch woofer incorporates a large magnet structure, a treated
paper cone, and a butyl rubber surround for lasting, low distortion
performance. The 1.0 inch tweeter is a silk soft dome with a phase
plug to smoothly distribute the high frequency energy. The included
32 W transformer provides plenty of power for even high SPL
applications. The 16 ohm impedance allows for easy low impedance
daisy chaining.
The CS-C6 incorporates several innovative features that make it
a truly remarkable speaker. The ZeroEdge™ grille is magnetically
attached for easy installation, and features a completely seamless
transition from grille to ceiling. The entire CS-C series of speakers
uses the same diameter back can which simplies installation, and
inventory management with only one size hole to cut, one size grille
to install, and one size tile bridge to bring to the job site.
Loudspeaker Dimensions
• Magnetic ZeroEdge™ grille with removable badge
• Easy inventory management with a single tile bridge
and common grilles for the whole CS-C series
• Only one hole size to cut for all models within the CS-C series
• Premium drivers and electronics for exceptional
sound quality and intelligibility
• Integrated high power transformer
• 16 ohm impedance for low impedance daisy chaining
• Low prole back can for installation into small ceiling voids
• Front mounted tap switch
• 4-pin quick connector for easy daisy-chaining and secure
connections
• Available colours: black, white
Tile Bridge Dimensions
(14.04in)
356.6mm
(11.26in)
286mm
(11.39in)
289.3mm
Every Cloud product is exhaustively tested for electronic performance and sonic perfection in Shefeld, England.
(10.39in)
270mm
Minimum
cutout dia.
Inc. Grille
(8.37in)
212.7mm
(0.15in)
3.9mm
(8.22in)
208.8mm
(23.62in)
600mm
(10.67in)
271mm
(0.51in)
13mm

Applications
Tap Settings
The CS-C6 was developed as a versatile background music and
mid-SPL paging speaker. It offers superior acoustic performance, and
premium design at an economic price point. It is ideally suited for use
in restaurants, retail stores, airports, churches, board rooms, health
care facilities, and hotels. The entire CS-C series shares the same
acoustic signature, so installations with varying SPL requirements
can seamlessly integrate multiple models from the line. The CS-C6
is a premium background and paging speaker that offers high end
performance and design at an affordable price point.
Graphs
Frequency Response
Ta p Tap Settings
100 V 70 V 25 V
1 16 ohm
2 X 32W 4W
3 32W 16W 2W
4 16W 8W 1W
5 8W 4W 0.5W
6 4W 2W 0.3W
Impedance

Technical Specications
Description 6.5” 2-way in-ceiling with magnetic grille and steel back can.
Response (f3) 87 Hz -20 kHz
Response (f10) 65 Hz -20 kHz
Impedance 16 ohm
Sensitivity (2.83 V/1 m) 88 dB
Sensitivity (1 W/1 m) 91 dB
Power handling 50 W
Maximum SPL 108 dB
Average coverage angle (2 kHz - 10 kHz) 144°
Transformer taps 32,16, 8, 4, 2 W
Tweeter 1 inch silk dome with phase plug
Woofer 6.5 inch treated paper with rubber surround
Input 4 pin Euroblock
Included accessories Input cover plate (installed), male Euroblock
Optional accessories Tile bridge
Available colours Black (RAL9011), White (RAL9003)
Net weight/Gross weight 3.3 kg (7.3 lb) / 4.1 kg (9 lb)
Packaging 1 per box, cardboard inner packaging, single instruction sheet
Conformance UL1480 / 2043 planned, RoHS, CE approved
Architect’s and Engineer’s Specication
The loudspeaker shall consist of one powder coated steel enclosure containing two transducers, a frequency dividing network, a transformer, and
acoustic damping material. It shall incorporate an integrated clamping system including 4 dog ears. It shall include one removable steel grille afxed
to the bafe via integrated magnets. The grille shall include a removable logo tab.
The loudspeaker shall include one 165 mm (6.5 inch) low-frequency transducer and one 25 mm (1.0 inch) high-frequency transducer with a
frequency-dividing crossover network installed in a ported enclosure. The low frequency voice coil diameter shall be 25.4 mm (1.0 inch). The
low-frequency transducer shall have a treated paper cone material with a rubber surround. The high-frequency transducer shall incorporate a silk
dome with a plastic phase plug.
The loudspeaker shall include a 32 watt transformer with taps at 32 W, 16 W, 8 W, 4 W, and 2 W. Said taps shall be selected via an included tap switch
located on the front baffle, under the magnetically removable grille. The transformer shall accept 25 V, 70.7 V, or 100 V. The tap switch shall
also include a transformer bypass position, allowing for direction connection to the 16 ohm low impedance circuit.
Nominal performance specications shall be as follows: The loudspeaker shall have a usable frequency range extending from
65 Hz - 20 kHz (-10 dB). The nominal impedance shall be 16 ohms, and the maximum continuous RMS power handling shall be at least 50 W
according to the EIA-426-B standard. Sensitivity measured at 2.83 V / 1 m shall be 88 dB. The maximum output at 1 m shall be 91 dB.
Installation for the speaker shall be by 4 blind-mount constant-tension dog ear clips and shall attach to ceiling thicknesses ranging from
3.18 mm (0.125 inches) to 50.8 mm (2 inches). The external wiring shall be via 4-position 5.08 mm Euroblock connector, accepting up to 10 gauge
wire. An optional tile bridge is available.
The maximum overall height shall be no more than 212.7 mm (8.37 inches) and the maximum diameter shall be no more than
289.3 mm (11.39 inches). The maximum visible dimensions shall be no more than 3.9 mm (0.15 inches) in height by 289.3 mm (11.39 inches) in
diameter. The back can shall have a maximum diameter of 264.0 mm (10.39 inches), and shall t within a cutout diameter of 266.7 mm (10.5 inches).
The unit is factory preset to the 32 watt setting in the 100 volt operating mode, with a tap switch located on the front bafe.
The system shall be the Cloud CS-C6 for both low- and high- impedance applications.
www.cloud.co.uk www.cloudusa.pro
Issue_1.3
E&OE