Closet Maid 6605 User Manual

6605

75381 06605

01

Part Chart

Support Brackets needed per shelf:

Shelf Length 4’1.2 m 6

Wall to Wall Pared

Wall to Open Pared a borde

Open to Open Borde a borde

a pared

1123
2

234

3345

1

Position support bracket on shelf as shown.

Coloque el soporte en la repisa tal como se muestra.

2

Level shelf. Drill 1/4" hole through wall using bracket as guide. DO
NOT PUNCH HOLES. Space support brackets every 3’.

Nivele la repisa. Perfore un orificio de 6 mm a través de la pared usando
el soporte como guía. USE TALADRO UNICAMENTE. Coloque los soportes
a cada 91,5 cm de distancia.

3

’

1.8 m 8’2.4m 12’3.7m

Push pre-loaded anchor into drilled hole. Use bottom of hammer
handle to push in pin. For removal, pry pin out with screwdriver.

Empuje el tarugo preinstalado dentro del orificio perforado. Use
la parte inferior del mango del martillo para empujar la clavija
hacia adentro. Para remover, palanquee la clavija sacándola con
un destornillador.

If a ClosetMaid® product does not give
user complete satisfaction when installed in
accordance with manufacturer's
instructions, it will be exchanged free of
charge. Only the unsatisfactor
multi-piece product will be exchanged.

Consumer Toll-Free Help Line
1-800-874-0008
(U.S.A and Canada)
www.closetmaid.com

Manufacturer reser
specifications without notice.

Made
©ClosetMaid Corporation 2004

Ocala, FL 34478-4400

ves the right to change

in USA

y par

t in a

01-84640