Closet Maid 1775 User Manual
1775
75381 0177506
1
Use one support bracket 2-3” from each end of shelf and one every 36” in between. Position support
bracket on shelf as shown. Note pr
oper position for various shelf types.
Coloque un sopor
medio. Ponga el sopor
diversos tipos de r
12” (30,5 cm)
Shelf
te entre 5 cm y 7,6 cm desde cada extremo de la repisa y a cada 91,4 cm entre
te en la repisa tal como se muestra. Tome nota de la posición correcta para los
episas.
12” (30,5 cm)
& Rod
SuperSlide
®
2
Level shelf. Drill 1/4” hole through wall using
suppor
t bracket as guide. DO NOT PUNCH
HOLES.
Nivele la repisa. Perfore un agujero de 6 mm a
través de la pared usando el soporte como
guía. USE TALADRO SOLAMENTE
.
16” (40,6 cm)
Shelf & Rod
16” (40,6 cm)
SuperSlide
®
with Hang Rod
3
e-loaded anchor thr
Push pr
bracket and into drilled hole. Use bottom of
hammer handle to push in pin. For
r
emoval, pry pin out with screwdriver.
Empuje el tar
el agujer
mango del mar
hacia adentr
ugo precargado por el soporte en
eforado. Use la par
o pr
tillo para empujar la clavija
o. Para r
clavija sacándola conun destornillador.
If a ClosetMaid® product does not give user complete
satisfaction when installed in
accordance with manufacturer's instructions,
it will be exchanged free of charge. Only the unsatis
factory part in a multi-piece product
will be exchanged.
Consumer Toll-Free Help Line
1-800-874-0008
(U.S.A
Manufacturer reser
change specifications without notice.
Made
©ClosetMaid Corporation 2005
Ocala, FL 34478-4400
in USA
and
Canada)
ves the right to
ough suppor
emover
-
t
te inferior del
, palanquee la
01-84617
Loading...