At this point, check that you
know which is the inner strap,
that’s the one closest to your
body, and the outer strap, the
one furthest away.
Ensure the rings are positioned
close to your hips and just loosen
the material slightly to give you
enough room to get your baby
in; with practice you’ll learn how
much room you need to leave.
6
Lie the carrier out flat with the
logo underneath and the 4 straps
neatly laid out.
1
Pick up one of the straps, take it to
the opposite ring and thread it
through both rings from the top
down.
2
Bring the strap back up and
through just the top ring in the
opposite direction. Pull the material
through as far as you need. Check
the material isn’t twisted as it goes
through the rings.
3
Do the same again with the other
strap, taking it through the opposite
rings and pulling the material
through. Your carrier is now ready
to use again.
4
If the material comes out of the
rings you will need to know
how to re-thread them.
Threading the rings
If you require these instructions
in a different language, please
visit our website at
www.closeparent.com
Wenn Sie diese Anweisungen
in einer anderen Sprache
benötigen, besuchen Sie
unsere Webseite unter
www.closeparent.com
Si desea estas instrucciones
en otro idioma, visite nuestro
sitio web en
www.closeparent.com
Per richiedere queste istruzioni
in un’altra lingua, vi invitiamo
a visitare il nostro sito web
all’indirizzo
www.closeparent.com
Pour obtenir ces instructions
dans une autre langue, visitez
notre site à l’adresse suivante:
www.closeparent.com