CLiPtec ISUTTU RZS852 User Manual
User Manual
● Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
●
Do not mix new and old batteries or batteries of different types (for example,
●
Do not allow metal objects to touch the battery terminals on the device; they
● Remove the batteries if they are worn out or before storing your device for an
● If a battery leaks, remove all batteries, taking care to keep the leaked fluid
CLIPTEC 1600DPI 2.4GHZ WIRELESS OPTICAL
MOUSE - ISUTTU
Model: RZS852
This symbol identifies safety and health messages in the Product Guide and other product
manuals.
Warning:
Failure to properly set up, use, and care for this product can increase the risk of serious injury or
death, or damage to the device or devices. Read this guide and keep all printed guides for future
reference.
Important Safety Information
Battery-Powered Devices
These precautions apply to all products that use rechargeable or disposable batteries. Improper
use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery
fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.
To reduce the risk of injury:
● Keep batteries out of reach of children.
carbon-zinc and alkaline batteries).
can become hot and cause burns.
extended period of time. Always remove old, weak, or worn-out batteries promptly and
recycle or dispose of them in accordance with Local and National Disposal Regulations.
from touching your skin or clothes. If fluid from the batter comes into contact with skin
or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly
clean the batter compartment with a damp paper towel, or follow the battery
manufacturer’s recommendations for cleanup. Disposable (non-rechargeable)
batteries only:
type. Use and replace only with correct size and type (alkaline, zinc-carbon, or zincchloride) of batteries.
Caution Risk of explosion if battery is replaced by an incorrect
●
Do Not Attempt Repairs
Do not attempt to take apart, open, service, or modify the hardware device or power supply.
Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to
open and/or modify the device, including any peeling, puncturing, or removal of any of the labels,
will void the Limited Warranty.
Choking Hazard
This device may contain small parts which may be a choking hazard to children under 3. Keep
small parts away from children.
Usage and Cleaning
Use in accordance with these instructions:
Do not use near any heat sources.
●
only with dry cloth.
shock, do not expose this product to rain or other types of moisture.
Do not allow this product to become wet. To reduce the risk of fire or
●
Only use attachments/accessories specified.
●
●
Clean
Adhesive Mounting
Some devices use adhesive tape to mount components in your workspace. DO NOT mount on
antiques, heirlooms, or other valuable or irreplaceable items. After mounting, removing the
adhesive may damage the cosmetic coating and/or leave an adhesive residue.
Tablet Stands
To avoid damaging equipment placed on the tablet stand, do not overload or bump it, causing it to
collapse or tip over.
Laser and LED Specifications
Caution Use of controls or adjustments, or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Optical (LED) Mouse
This product has been evaluated to comply with International Standard (IEC 60825-1:2001-08)
and IEC 62471 (2006-07). This product uses LEDs that are considered Class 1 (IEC 608251:2001-08).
Loading...