Clipsal 41E350PBES2SM-VW, PDL356PBSM-VW, 41E6PBES3SBM-VW, PDL356PBTMBT-VW, 41E350PBT2SM-VW Installation Manual
...
Iconic Series
Push-button Electronic Switch
41E350PBES2SM-VW | PDL356PBSM-VW
41E6PBES3SBM-VW | PDL356PBTMBT-VW
41E350PBT2SM-VW | PDL348PBTM-VW
41E6PBT3SBM-VW | PDL348PB6TMBT-VW
41E10PBT3SBM-VW | PDL348PB10TMBT-VW
41E6PBTC3SBM-VW | PDL346PB6TCMBT-VW
41E10PBTC3SBM-VW | PDL346PB10TCMBT-VW
Push-button Timer
Timeclock
Installation Instructions
REGISTERED DESIGN
Iconic Pushbutton Electronic Switch | Timer | Timeclock
Copyright Notice
The concepts, products and designs described in this document are the subject of international
patents, and protected by international law. © Copyright Schneider Electric (Australia) Pty Ltd.
All rights reserved.
Installation Instructions
Trademarks
Clipsal is a registered trademark of Schneider Electric (Australia) Pty Ltd.
'PDL by Schneider' is a registered trademark of Schneider Electric (NZ) Ltd.
Schneider Electric is a registered trademark of Schneider Electric (Australia) Pty Ltd.
Apple®, App StoreSM, iPhone®, iPod®, iPad®, MAC OS® and Safari® are brand names or
registered trademarks of Apple Inc.
Google Play™ Store, Android™ and Google Chrome™ are brand names or registered trademarks of Google Inc.
All other logos and trademarks are the property of their respective owners.
Disclaimer
Schneider Electric (Australia) Pty Ltd reserves the right to change specications or designs
described in this manual without notice and without obligation.
2 of 35 Clipsal by Schneider Electric
Iconic Pushbutton Electronic Switch | Timer | Timeclock Installation Instructions
Warnings
Read through the following instructions carefully and familiarise yourself
with the device prior to installation, operation and maintenance. The
warnings listed below can be found throughout the documentation and
indicate potential risks and dangers or specic information that claries or
simplies a procedure.
The addition of this symbol to the “Danger” or “Warning” safety instructions indicates an electric danger that could result in serious injuries if the
instructions are not followed.
This symbol presents a safety warning. It indicates a potential danger
of personal injury. Follow all safety instructions with this symbol to avoid
serious injuries or death.
DANGER
DANGER indicates an imminently hazardous situation that will
inevitably result in serious or fatal injury if the instructions are not
observed.
WARNING
WARNING indicates a possible danger that could result in death or
serious injuries if it is not avoided.
CAUTION
CAUTION indicates a possible danger that could result in minor
injuries if it is not avoided.
NOTICE provides information about procedures that do not represent
the risk of any physical injury.
PDL a brand of Schneider Electric
NOTICE
3 of 35
Iconic Pushbutton Electronic Switch | Timer | Timeclock
Installation Instructions
Table of Contents
1 For your Safety...................................... 6
2 Description ......................................... 8
2.1 About ControlLink ........................................8
2.2 Bluetooth Low Energy (BLE) Capability .......................8
2.3 Locking Bar .............................................8
2.4 Combination Square/Phillips Drive Terminal Screws ............. 8
2.5 Push-button Electronic Switch ..............................9
2.6 Push-button Electronic Timer ...............................9
2.7 Timeclock .............................................10
2.8 More about Iconic Push-button Switches, Timers & Timeclocks....11
3 Features .......................................... 12
3.1 Push-button Electronic Switch .............................12
3.2 Push-button Timer.......................................12
3.3 Timeclock .............................................12
4 Unit Operation ..................................... 13
4.1 Push-button Electronic Switch .............................13
4.2 Push-button Timer/Timeclock ..............................13
4.3 Timeclock-Specic Operations .............................14
4.4 LED Indicator ..........................................14
5 Configuration Mode ................................. 14
5.1 Conguration Presets for Push-button Electronic Switch .........14
5.2 Conguration Presets for Push-button Timer/Timeclock (Switch Mode)
15
5.3 Conguration Presets for Push-button Timer/Timeclock (Timer Mode)
15
5.4 Exit Conguration Mode ..................................15
6 Overload Protection Facilities ........................ 16
7 Load Compatibility.................................. 17
7.1 Important Notices for Iconic Push-button Electronic Switch, Timer &
Timeclock .............................................
7.2 Load Compatibility Table..................................18
8 Incompatible Loads ................................. 20
8.1 Push-button Electronic Switch .............................20
8.2 Push-button Timer.......................................20
4 of 35 Clipsal by Schneider Electric
17
Iconic Pushbutton Electronic Switch | Timer | Timeclock Installation Instructions
8.3 Timeclock .............................................20
9 Installation Requirements............................ 20
9.1 Fitting the Mechanism to the Plate ..........................21
9.2 Preparing and Fitting the Flush Box (when required) ............21
9.3 Fitting the Plate .........................................22
9.4 Fascia Installation and Removal ............................23
10 Wiring Diagrams.................................... 23
10.1 Connection Limitations ...................................24
10.2 Overview ..............................................25
10.3 Terminal Blocks for 3-Wire 6 A Units.........................25
10.4 Cabling Diagrams: 2-Wire 350 W Units ......................26
10.5 Cabling Diagrams: 6 A Units ...............................27
10.6 Cabling Diagrams: 10 A Units ..............................28
10.7 Using the Iconic Smart Remote Mechanism................... 29
10.8 Wiring Diagrams: Run-on Timer Application ...................29
10.9 Multi-Gang Derating .....................................29
11 Wiser Room App ................................... 30
11.1 About the Wiser Room App................................30
11.2 Download and Install the Wiser Room App....................30
11.3 Pair Iconic Device with the App.............................31
11.4 Restore Point and Password ..............................31
12 Electrical Specifications ............................. 32
12.1 Electrical Specication Notes ..............................32
12.2 Electrical Specications ..................................32
13 Troubleshooting .................................... 33
13.1 Switches and Timers (2-Wire Units) .........................33
13.2 Troubleshooting Notes ...................................33
14 Warranty .......................................... 34
PDL a brand of Schneider Electric
5 of 35
Iconic Pushbutton Electronic Switch | Timer | Timeclock
Installation Instructions
1 For your Safety
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• It is illegal for persons other than an appropriately licensed electrical
contractors or other persons authorised by legislation to work on the xed
wiring of any electrical installation.
• To comply with all safety standards, the product must be used only for the
purpose described in this instruction and must be installed in accordance with
the wiring rules and regulation in the location where it is installed.
• There are no user serviceable parts inside the product.
Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK
The Locking Bar on Iconic plates must be set to the Closed position to ensure
that the mechanism cannot be removed during normal operation.
Failure to follow these instructions will result in death or serious injury.
DANGER
RISK OF ELECTRIC SHOCK
• Hazardous voltage and electrical current may be present at the wire leads
and outputs of this product even when the device is switched off.
• Lock out and tag the input circuit before accessing the wiring connections.
Failure to follow these instructions will result in death or serious injury.
WARNING
RISK OF USE IN SAFETY– AND LIFE-CRITICAL APPLICATIONS
• This product is intended for general lighting applications and small motor
applications such as exhaust fans.
• Schneider Electric does not warrant or endorse this product for use in
applications which are critical to the health or life of any human being.
Failure to follow these instructions can result in death or serious injury.
6 of 35 Clipsal by Schneider Electric
Iconic Pushbutton Electronic Switch | Timer | Timeclock Installation Instructions
CAUTION
EQUIPMENT DAMAGE HAZARD
• Install the device according to instructions in this document.
• Pay attention to the specications and wiring diagrams related to the
installation.
• Do not use this product for any other purpose than specied in this
instruction.
Failure to follow these instructions can result in minor injuries, or
equipment damage.
PDL a brand of Schneider Electric
7 of 35
Iconic Pushbutton Electronic Switch | Timer | Timeclock
Installation Instructions
2 Description
The Iconic range includes a number of modular electronic switches, dimmers and
timers/timeclocks incorporating advanced remote load control technology with
Multi-Way dimming/switching capabilities.
The range also includes a selection of USB charging mechanisms.
Complementing the range are Wall Plates and Parts Packs (available separately)
in various colours to suit many interior nishes.
2.1 About ControlLink
ControlLink is a technology, available only in the Iconic range, that makes it easier
for installers to congure multi-way switching and dimming using standard electrical wiring techniques. Using a single control wire together with an Active wire,
loads can be controlled remotely and timers triggered to allow run-on timing and
similar applications.
2.2 Bluetooth Low Energy (BLE) Capability
BLE-enabled Iconic products can be congured and controlled via Bluetooth with
the Wiser Room App installed on a compatible mobile device.
You can control the following Iconic products with the Wiser Room app:
• Push-button Electronic Switch with CTL and BLE (6AX 3-Wire)
• Push-button Timer with CTL and BLE (6AX 3-Wire)
• Push-button Timer with CTL and BLE (10AX 3-Wire)
• Time Clock with CTL, BLE and Push-button (6AX 3-Wire)
• Time Clock with CTL, BLE and Push-button (10AX 3-Wire)
Learn more about the Wiser Room app: see "Wiser Room App" on page 30
2.3 Locking Bar
Iconic mounting plates include a new patented locking bar feature to secure the
mechanism body to the mounting plate. The mechanisms are easier to remove
from the plate using this new mounting technique.
2.4 Combination Square/Phillips Drive Terminal Screws
On Iconic mechanisms with terminals, the terminal screws feature a combined
Square Drive / Phillips Drive head, providing installers with the advantages of the
Square Drive while retaining the commonality of the Phillips Drive.
8 of 35 Clipsal by Schneider Electric
Iconic Pushbutton Electronic Switch | Timer | Timeclock Installation Instructions
2.5 Push-button Electronic Switch
Iconic Push-button Electronic Switches provide a robust mechanism for multi-way
switching, with the added benets of compatibility with a wide range of load types
(depending on unit) and advanced protection features. Push-button Electronic
Switches are available in two models.
Push-button Electronic
Switch with ControlLink
Push-button Electronic
Switch 6 A with ControlLink and BLE
A 2-wire 350 W switch suitable for multi-way switching of dimmable and non-dimmable LED, Electronic Low Voltage lighting
transformers, Iron-core low voltage lighting transformers and 240 V
incandescent halogen lamps.
A 3-wire 6 A switch suitable for multi-way switching of dimmable and
non-dimmable LED, Electronic Low Voltage lighting transformers,
Iron-core low voltage lighting transformers and 240 V incandescent
halogen lamps, small motors (e.g. exhaust fans), heat lamps and
contactors. This switch can be congured and controlled via the
in-built push-button or via Bluetooth using the Wiser Room App
installed on a compatible mobile device.
Both switch models feature multi-way switching capability, LED indicator and the
ability to be remotely controlled with ControlLink.
2.6 Push-button Electronic Timer
Iconic Push-button Electronic Timers provide all the features of the Push-button
Electronic Switch with the additional benet of a timer mode. In this mode, the
load is switched On when the in-built push-button (or push-button on another Iconic unit connected via the ControlLink terminal) is pressed. The load is switched Off
once the congured time expires.
While a timer is counting down, the in-built LED Indicator ashes to indicate that
the timer is in operation. The user can stop the timer and switch off the load by
pressing either the in-built push-button or the push-button on any Iconic unit connected via ControlLink.
All Push-button Electronic Timer units offer a range of preset timer intervals from
which the user can select via Conguration Mode using the in-built push-button.
Higher-specication timer units also offer granular control over the timer interval
via Bluetooth Low Energy (BLE) and the Wiser Room App installed on a compatible mobile device.
Push-button Electronic Timers are available in three models.
Push-button Electronic
Timer with ControlLink
A 2-wire 350 W timer switch suitable for multi-way switching / timedelay switching of dimmable and non-dimmable LED, Electronic
Low Voltage lighting transformers, Iron-core low voltage lighting
transformers and 240 V incandescent halogen lamps. This timer can
be congured via the in-built push-button.
PDL a brand of Schneider Electric
9 of 35
Iconic Pushbutton Electronic Switch | Timer | Timeclock
Installation Instructions
Push-button 6 A Timer
with ControlLink and
BLE
Push-button 10 A Timer
with ControlLink and
BLE
A 3-wire 6 A timer switch suitable for multi-way switching / time-delay
switching of dimmable and non-dimmable LED, Electronic Low Voltage lighting transformers, Iron-core low voltage lighting transformers
and 240 V incandescent halogen lamps, small motors (e.g. exhaust
fans), heat lamps, contactors and purely resistive loads. This timer
can be congured and controlled via the in-built push-button and via
Bluetooth with the Wiser Room App installed on a compatible mobile
device.
This timer can also be congured as a fan run-on timer where a
switched light signal can be connected to the ControlLink terminal to
provide a re-triggerable exhaust fan control.
A 3-wire 10 A timer that can be used for all loads compatible with
the 6 A timer, but with a higher current rating. This timer can be
congured and controlled via the in-built push-button and via
Bluetooth with the Wiser Room App installed on a compatible mobile
device.
2.7 Timeclock
Iconic Timeclocks offer the functionality of Push-button Timers, plus the ability to
congure up to 16 time schedules that allow for:
• Days of the week (weekdays, weekends) and months of the year
• Sunrise/Sunset times that adjust based on geolocation.
All Timeclocks:
• are BLE-capable and can be congured/controlled via Bluetooth with the Wiser
Room App installed on a compatible mobile device
• can maintain real-time settings (current time, date) for a minimum of 12 hours
during a Mains power outage
• feature a congurable On/Off manual override push-button.
Timeclocks include ControlLink remote control / triggering.
6 A Timeclo
ControlLink and BLE
ck with
A 3-wire 6 A timeclock suitable for multi-way switching / time-delay
switching of dimmable a
lighting transformers, Iron-core low voltage lighting transformers and
240 V incandescent halogen lamps, small motors (e.g. exhaust fans),
heat lamps, contactors and purely resistive loads. Use where it is
desirable to set time schedul
timeclock can be congured and controlled via the in-built push-
button and via Bluetooth with the Wiser Room App installed on a
compatible mobile device.
nd non-dimmable LED, Electronic Low Voltage
es for switching loads On and Off. This
10 of 35 Clipsal by Schneider Electric
Iconic Pushbutton Electronic Switch | Timer | Timeclock Installation Instructions
10 A Timeclock with
ControlLink and BLE
A 3-wire 10 A timeclock that can be used for all loads compatible
with the 6 A timeclock, but with a higher current rating. Use where
it is desirable to set time schedules for switching loads On and Off
where the additional functionality of the timeclock is desired. This
timer can be congured and controlled via the in-built push-button
and via Bluetooth with the Wiser Room App installed on a compatible
mobile device.
2.8 More about Iconic Push-button Switches, Timers &
Timeclocks
Iconic Push-button Switches, Timers and Timeclocks utilise powerful and sophisticated technology to provide full switching control of almost any type of load
(depending on unit), whether it be dimmable LED* or non-dimmable LED, CFL
lighting, mains voltage halogen or dichroic lamps, iron-core or electronic low voltage lighting transformers as used in down light applications.
These products have also been specically designed to handle energy efcient
lighting.
All Iconic Push-button Switches, Timers and Timeclocks incorporate over-temperature protection. Iconic 2-wire 350 W units also incorporate over-current, overvoltage, short-circuit and thermal fuse protection. These features are designed
to make the Iconic range of electronic switches, timers and timeclocks rugged,
robust and reliable.
* Iconic push-button electronic switches, timers and timeclocks can switch dimmable LEDs
but have no dimming capability. Select a Dimmer from the Iconic range if dimming of LEDs is
required.
PDL a brand of Schneider Electric
11 of 35
Loading...