Clipcomm BS-H100 User Manual

Bluetooth
Analog Telephone Adapter

BS-H100 User manual

[Table of Contents]

Before use

Package contents
Description of parts
Installation
Precautions

How to use

Pairing
Connecting
Disconnecting
Making a call
Ending a call
Answering a call
Transferring a call
Resetting
Summary of button functions
LED indication

Supplement

Troubleshooting
Cautions
Additional information
Standards and specifications
Limited warranty

2
3
4
5

6
8

9
10
10
10
11
12
13
14

15
16
17

18
19

1

Before use

Clipcomm’s BS-H100 is a Bluetooth analog telephone adapter
that provides a wireless connection between a Bluetooth
headset and a conventional analog telephone. BS-H100
enables you to have a conversation through your Bluetooth
headset with a telephone at home or in the office. The DSP
(digital signal processor) feature of BS-H100 provides a
superior audio performance via noise reduction and echo
cancellation.

[Package contents]

Ensure that the items mentioned below are all included in
the package. If any item is missing, please contact the local
dealer.

BS-H100

2

User manual

Charger Telephone cable

[Description of parts]

LED Indicator

Multi-function button

Rear Terminal

Before use

3

Before use

[Charging]

Install the product as shown below.

1. Connect the port of your phone with the PHONE port at
the back side of BS-H100 using the included telephone
cable.

2. Plug the telephone(PSTN) cable into the LINE port at the
back side of BS-H100.

3. Connect the included power adapter to the power port
at the back side of BS-H100.

4

How to use

[Precautions]



BS-H100 is automatically turned on when it’s plugged in,

and the LED indicator starts blinking slowly after 5 seconds.



Use the included power adapter only. Using the power
adapters not approved can cause a breakdown or damage
to BS-H100.



A specific telephone cable for a digital telephone such
as a key-phone is different from a normal telephone cable,
and BS-H100 may not be operated with the phone.



Keep BS-H100 at least 1m away from a wireless LAN or
a wireless Internet AP. The Electric interference can cause
the quality deterioration.

5

How to use

[Pairing]

Before using BS-H100 for the first time, you must pair it with
your Bluetooth headset following below steps. Pairing is a
process to connect two devices with Bluetooth wireless
function and recognize each other.

Set Bluetooth headset into pairing standby mode

1. Set the Bluetooth headset into the pairing standby mode
following the user manual of your Bluetooth headset.

For detailed instructions on pairing BS-H100 with
the Bluetooth headset, please consult your Bluetooth
headset user guide.

You must set the Bluetooth headset in the pairing
mode first to enable BS-H100 to search the headset
automatically after the pairing standby mode.

BS-H100 search setting

2. When the power is on, press and hold down button for
3 seconds in order to set BS-H100 to the searching mode.

6