Clinton 84100, 84200, 84430 User Manual

USER MANUAL

Model Numbers: 84100 • 84200 • 84430

BARIATRIC OPEN BASE POWER TABLES

Combine Load and Force Capacity: 550 lbs. (249 kg)

Limited Warranty

ON FRAME &

ELECTRICAL

COMPONENTS

CLI-MA-005 REV A

CONTENTS

Important Information ................................................................................................................................ 2

Safety ......................................................................................................................................................... 3

Parts .......................................................................................................................................................... 3

Specifications .............................................................................................................................................. 4

Electrical Warnings ...................................................................................................................................... 4

Unpacking & Setup ................................................................................................................................. 5-6

Operation ................................................................................................................................................ 6-7

Maintenance, Parts Replacement & Cleaning .............................................................................................. 8

Options & Limited Warranty ....................................................................................................................... 9

FAQs .................................................................................................................................................... 10-11

IMPORTANT INFORMATION:

Clinton Bariatric Open Base Power Tables Models 84100 , 84200 and 84430 are designed to be used to
accommodate patients and medical and physical therapy professionals for examinations and select procedures
where the load capacity or load and force is not greater than 550 pounds (249 kg).
It is extremely important for medical and therapy professionals to read and become familiar with all the tables
features, functions and controls BEFORE putting the table into service.

Clinton Bariatric Open Base Power Tables Models 84100, 84200 and 84430 use heavy gauge steel construction

for the base topped with a comfortable 2" padded surface covered in tough, woven-back vinyl upholstery. The
pivot points are self-lubricating and the smooth vertical adjustment is powered by a dependable 120v motor.

Models 84200 and 84430 are equipped with a pneumatic backrest that can be accessed from either side.

The foot controller on all models features an up button and a down button that controls the operation of the
table. An optional hand controller is available.

SERVICE

If your Clinton Bariatric Open Base Power Tables Models 84100, 84200 and 84430 should fail operating for
any reason, Please call Clinton Industries for assistance in diagnosing the problem and having your equipment

serviced, if necessary.

Please provide the following information before calling Clinton regarding an in or out of warranty problem.

Date of Purchase:

Serial Number:

Model Number:

Dealer/Distributor:

Dealer/Distributor Phone:

Dealer/Distributor Address:

2

Model Number and

Serial Number are

located on the

under side of the metal

frame at the head end

of the table

SAFETY

It is extremely important that all precautions regarding safe use of Clinton Open Base Power Tables Models
84100, 84200 and 84430 be strictly observed to insure the safety of both patient and healthcare
professional.

Pay particular attention to Cautions and Warnings throughout
this manual. Potentially hazardous and harmful situations to users,
patients and property can occur if these cautions and warnings are
ignored.

PARTS

Identifying the part of the Clinton Bariatric Open Base Table can be very important when operating the
table or when reporting a problem.

Premium, woven-back
upholstery

Seamless
rounded
corners

Foot Drop Section
(model 84430

only)

Foot Drop Section
Lever (model 84430

only)

Foot Pedal

Plywood Top

BODY

HEAD-END

BASE

Motor Assembly

Top Frame

Center Leg

Adjustable Backrest
Actuator Lever
1 on each side
(models 80200, &
84430 only)

Center Axle

“H” Leg

“H” Leg Axle

3

GENERAL SPECIFICATIONS

Models: 84100 & 84200

Table Weight .............................................. 415 lbs.

Total Load Capacity (including force) .......... 550 lbs.

Overall Length ................................................... 72"

Overall Width ..............................34" & 40" Models

Height Range ...........................................18" to 35"

Backrest (Model 84200)

Length ............................................................... 38"

Width ................................................................ 34"

Storage & Transportation

Temperature .................................... 20º F to 150º F

Humidity ............................................-10% to 90%

Operation

Temperature .................................... 50º F to 100º F

Humidity ............................................. 30% to 75%

MOTOR SPECIFICATIONS

Models: 84430

Table Weight .............................................. 415 lbs.

Total Load Capacity (including force) .......... 550 lbs.

Overall Length ................................................... 76"

Overall Width ..............................34" & 40" Models

Height Range ...........................................18" to 35"

Backrest

Length ............................................................... 38"

Width .....................34" & 40" depending on model

Drop Section

Length ............................................................... 13"

Width .....................34" & 40" depending on model

Storage & Transportation

Temperature .................................... 20º F to 150º F

Humidity ............................................-10% to 90%

Operation

Temperature .................................... 50º F to 100º F

Humidity ............................................. 30% to 75%

Clinton Industries Power Treatment Tables use motors and power supplies that meet UL 60601-1 and
CAN/CSA C22.2 601.1.

120VAC 50-60hz 8000N push 1 min. of constant use out of every 9 minutes

IMPORTANT ELECTRICAL WARNINGS

WARNING: When performing any procedure that requires use of electrical instruments or equipment,

the patient must be insulated fron the metal portions of the table with non conductive material. Failure
to do so mat result in electrical shock or injury to the patient or attendant.

WARNING: Always use 110v, 60hz alternating current. Failure to use the proper electrical connection

may result in electric shock to patient and attendant and will result in damage to the equipment

WARNING: Never use these tables in oxygen intense or other explosive environment. Failure to do
so could result in flash fire or explosion which could result in serious injury or death.

4