Page 1
CLASSIC SERIES
STAIRCASES
MODELS 4-5501-30 & 4-5501-36
ASSEMBLY INSTRUCTIONS
Page 2
ASSEMBLY INSTRUCTIONS FOR CLASSIC SERIES,
ONE-SIDED STAIRCASES
MODELS 4-5501-30 & 4-5501-36
MAXIMUM WEIGHT CAPACITY 500 LBS
Thank you for counting on Clinton to meet your physical
therapy needs by purchasing this fine equipment. All Clinton
equipment is designed and manufactured to provide years
of dependable service because we want you as a customer
now and in the future. Below are easy to follow instructions on
how to properly assemble your equipment. Please contact
us at 800-441-9131 if you experience any difficulty with the
assembly or have questions.
INTENDED USE. Clinton Classic Series, One-Sided Staircases
are specifically designed and engineered for physical therapy
use only. Persons using the staircases should be observed by
trained medical or physical therapy personnel. Never allow
anyone to use the staircases unattended. Combination of
weight and force exerted on the equipment is not to exceed
a total of 500 lbs. Using this equipment for unintended
purposes could result in damage to the equipment and/or
serious injury to persons or persons using the equipment.
E
C
A
A
A
A
D
A
A
Remove protective black bolt covers from both
1
2
Repeat the procedure for the opposite side of the platform.
sides of the platform and both right and left
handrails
Match lettered steel uprights with the letters
on the platform and secure with the 9/16"
washer nuts—but do not tighten all the way.
Contents
A. Upright Posts
(consisting of lettered
posts A through F)
B. Platform
C. Left Handrail
D. Right Handrail
E. Rear Handrail
B
Hardware
(4)
11/4"
Phillips Head Bolts
(16) 7/16"
(12) 9/16" Washer Nuts
Tools Required
•
Adjustable Wrench or Ratchet
• Phillips Screwdriver
Time Required
•
20 – 30 Minutes
Washer Nuts
Page 3
Once all the uprights are in place, it is
3
side of the rear uprights and put the four (4) 1-1/4" Phillips
head bolts through the wooden handrail and the steel
uprights.
important that you attach the rear handrail
FIRST. Position the rear handrail on the outer
After the rear handrail has been secured, position
5
with the remaining twelve (12) 7/16" washer nuts.
the bolts on the right and left handrails so they
line up with the holes on the uprights and secure
4
Secure the rear handrail with four (4) 7/16"
washer nuts. DO NOT OVER TIGHTEN.
6
After the right and left handrails have been fully
tightened, go back and fully tighten all of the
uprights at the base.
FOR SAFETY PURPOSES, TAKE TIME TO CHECK ALL BOLTS AND NUTS TO INSURE THAT
THEY ARE SECURELY TIGHTENED AND THAT THE EQUIPMENT HAS BEEN PROPERLY ASSEMBLED
ACCORDING TO THESE INSTRUCTIONS. CLEAN ACCORDING TO YOUR FACILITY'S STANDARDS BEFORE USE.
(SEE CLEANING INSTRUCTIONS ON BACK.)
I
Page 4
Warranty
Limited Warranty
ON FRAME &
ELECTRICAL
COMPONENTS
Clinton Industries warrants its equipment to be free of defects in workmanship for five years from the date of purchase. This
warranty does not include damage resulting from accident, abuse or misuse, alteration, or negligence of the product and
expressly excludes normal wear of parts. Contact Clinton for full warranty details.
Limited
Warranty
Care & Cleaning
Clinton physical therapy staircases are built to be durable. With proper care, your Clinton equipment will provide years of
superior looks and performance. Before using any cleaning agents, try them on a small inconspicuous area to insure that they
will not harm the surface. Damage from cleaning is not covered under the warranty. Do not use alcohol based cleaning
agents.
Periodically check that all fasteners are secure and operating properly.
© Copyright 2015, Clinton Industries, Inc.
Loading...