Page 1
PREMIER SERIES STOOLS
MODELS: 2155 & 2155-21
ASSEMBLY INSTRUCTIONS
Page 2
ASSEMBLY INSTRUCTIONS KEY SERIES & STANDARD SERIES STOOLS
MODELS: 2155 & 2155-21
MAXIMUM WEIGHT CAPACITY 250 LBS
Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this quality equipment. All
Clinton equipment is designed and manufactured to provide
years of dependable service because we want you as a
customer now and in the future. Below are easy to follow
instructions on how to properly assemble your equipment.
Please contact us at 800-441-9131 if you experience any
difficulty with the assembly or have questions.
MODELS: 2155
A
E
B
C
INTENDED USE. Clinton stools are specifically designed and
engineered for professional use. Stools are intended for seated
tasks. DO NOT STAND ON STOOL. Standing on the stool
could result in serious injury. Combination of weight and force
exerted on the stool is not to exceed a total of 250 lbs. Using
the stool for unintended purposes could result in damage to
the equipment and serious injury.
IMPORTANT: Stools with casters move. Hold the stool in
a stable position before attempting to sit. Sitting without
holding the stool could result in the stool moving which
could cause a fall and potential injury for the person
attempting to sit on the stool.
Firmly grip each caster and push into place on
1
bottom of the 5-leg, aluminum base.
MODELS: 2155-21
G
E
Contents
A. Seat
B. Cylinder
C. Base
D. Casters (5)
F
C
E. Height
Adjustment
Lever
F. Backrest
G. J-Bar
D
Invert seat and place on surface that will not
2
seat tube. Press firmly. If you are having difficulty
inserting the cylinder, use a rubber mallet to tap it gently
into position. The cylinder should not fall out when the seat
A
B
D
Tools
• May require a
Rubber Mallet
Time Required
•
10 – 15 Minutes
is inverted.
damage the vinyl top. Place the button end of
the adjustable cylinder into the opening of the
Page 3
Insert the seat and cylinder assembly into the
3
sit down on the seat until the cylinder locks in place. The
seat will be tipped 2 degrees toward the front. It is designed
this way to relieve pressure on the thighs.
base and press firmly. Base should not detach
from cylinder when stool is lifted. Then carefully
FOR MODEL WITH BACKREST (-21)
Turn the stool on its side and insert the J-bar into
5
slot and into the threaded hole in the seat. Tighten the knob
firmly.
the backrest flange on the seat plate. Position at
desired depth and insert the knob through the
Backrest Height
Adjustment Knob
Backrest
J-bar slot
4
Using the lever under the seat, adjust the seat to
the height that's best for you.
FOR MODEL WITH 26 EXTRA TALL CYLINDER
OPTION AND 22 FOOT RING OPTION
Before placing the optional 26 Lift Cylinder into
6
top) 1/2 the way up the cylinder and lock in place.
To adjust the height position, loosen knob, raise or lower
foot ring and then secure by tightening locking knob.
the base, place the Foot Ring on the cylinder
(making sure the chrome ring is facing the stool
Page 4
Limited Warranty
ON FRAME &
ELECTRICAL
COMPONENTS
TROUBLESHOOTING
PROBLEM: Height adjustment, lever is not operating.
SOLUTION: The button on the adjustable cylinder is not pushed into the seat tube completely. Push down on the
padded seat of the stool to seat the cylinder more firmly in the seat tube.
NOTE: Person on the stool needs to weigh at least 90 lbs. to adjust the height of the seat.
IMPORTANT
FOR SAFETY PURPOSES, TAKE TIME TO CHECK STOOL TO INSURE THAT THE STOOL HAS BEEN
PROPERLY ASSEMBLED ACCORDING TO THESE INSTRUCTIONS AND THAT ALL PARTS ARE SECURE.
Warranty
Clinton Industries warrants manufactured products to be free of defects in materials, workmanship
or design under normal use for five years on all mechanical products and all electrical components
from the date of purchase. This warranty does not include damage resulting from accident, abuse
or misuse, alteration, or negligence of the product and expressly excludes normal wear of parts (including but
not limited to vinyl). Contact Clinton for full warranty details. ANY ALTERATIONS TO OUR PRODUCTS VOIDS ALL
WARRANTIES AND CLAIMS.
Limited
Warranty
Care & Cleaning
Clinton products are built to be durable. With proper care, your Clinton equipment will provide years of superior
looks and performance. Clean stool with a soft cloth and any mild cleaning agent that may be required for
sanitation. NEVER use abrasive scrubbing agents that may scratch the surfaces. Before using any cleaning
agents, try them on a small inconspicuous area to insure that they will not harm the any surface.
Damage from cleaning is not covered under the warranty. Do not use alcohol based cleaning agents.
© Copyright 2015, Clinton Industries, Inc.
Loading...