C&L Instruments VC-OTR-25 User Manual

Vacu-Cell

TM

System

Open Top Round

The Open Top incubation chamber forms a small
round chamber using a coverslip or other flat surface.
The chamber body has a outer diameter of 1.12 inches.
A 25 mm diameter coverslip, or other flat surface, is
held tightly against the chamber body by a vacuum.
You can use a vacuum pump system provided by C&L
Instruments or an ordinary laboratory vacuum.

Dual o-rings isolate the vacuum from the area of the
coverslip under study and securely hold the coverslip
in place. Chambers are formed quicky and easily,
without the need for screws, nuts or retaining rings.

The Open Top configuration allows direct access to
the top of the coverslip. The observation window
measures 17.5 mm diameter. The thickness of the body
measures 3 mm. The Open Top Round chamber is
available in black anodized aluminum that is coated
with parylene for biological compatibility.

Model Numbers

Model VC-OTR-25

(top view)

Model VC-OTR-25

(bottom view)

VC-OTR-25-BA
VC-25RCS-1
VC-25RCS-2

VC-25M-ORINGS

Patent Pending

Black Anodized Aluminum for 25 mm coverslip
25 mm Round Coverslips, No. 1, Box of 160
25 mm Round Coverslips, No. 2, Box of 110

Replacement O-rings for OTR-25 chamber, 10 Sets

C&L Instruments, Inc.

www.fluorescence.com

717-564-9491