C&L Instruments VC-CPR-25 User Manual

Vacu-Cell

TM

System

Center Perfusion Round

The Center Perfusion incubation perfusion chamber forms a small
round flow chamber using a coverslip or other flat surface. The
chamber body has a diameter of 1.12 inches and is 0.65 inches
tall. The coverslip is held tightly against the chamber body by a
vacuum. You can use the Model VCS-1 vacuum pump system
provided by C&L Instruments with this chamber, or an ordinary
laboratory vacuum.

This perfusion chamber is designed for small volumes. With the
center tube placed 0.5 mm above the coverslip, a 40 µl chamber
is formed. It is ideal for TIRF microscopy or protocols where small
volumes are preferred and access to the entire bottom surface of
the coverslip is desired.

This chamber design is available for 18 and 25 mm diameter
coverslips. Both styles can use the same microscope chamber
holder. Aluminum versions are coated with Parylene for a
biologically-compatible surface and are also available with an
integrated heating element and temperature probe port.

Model VC-CPR-25

Model Numbers

VC-CPR-25-CA
VC-CPR-25-BA
VC-CPR-25-BA-H
VC-CPR-18-CA
VC-CPR-18-BA
VC-CPR-18-BA-H
VC-25RCS-1
VC-25RCS-2
VC-18RCS-1
VC-18RCS-2
VC-25-ORINGS
VC-18-ORINGS

Vacuum

Port

Clear Acrylic, 25 mm
Black Anodized Aluminum, 25 mm
Black Anodized Aluminum, 25 mm, heater
Clear Acrylic, 18 mm
Black Anodized Aluminum, 18 mm
Black Anodized Aluminum, 18 mm, Heater
25 mm No.1 Round Coverslips, Box of 160
25 mm No. 2 Round Coverslips, Box of 110
18 mm No. 1 Round Coverslips, Box of 310
18 mm No. 2 Round Coverslips, Box of 300
O-rings for 25 mm series, 10 Sets
O-rings for 18 mm series, 10 Sets

Inlet/Outlet Ports

Coverslip

Model VC-CPR-25

(mid-section view)

C&L Instruments, Inc.

www.fluorescence.com

717-564-9491