C&L Instruments TC-30 User Manual

Vacu-Cell

TM

System

Temperature Controller
Model TC-30

The Model TC-30 temperature controller is designed to precisely control the temperature of a
Vacu-Cell incubation chamber or a Vacu-Cell microscope stage holder. The heater provides a
heavily filtered DC output at a maximum power of 30 Watts for noise-free temperature control. A
highly visible digital temperature readout indicates either the set-point temperature of the
controller or the measured temperature of the sensor probe.

The TC-30 is equipped with an adjustable gain control. The gain control is used to adjust the
feedback system and the dynamic temperature response of the Vacu-Cell. Although the controller
is essentially noise-free, a TTL-controlled inhibit input is also provided. This input control can be used
temporarily block power output to the heater element to permit high-sensitivity measurements. A
visual "stair case" display is also provided to indicate output power.

Included with the Model TC-30 is one cable, to connect the controller to the Vacu-Cell, and one
temperature sensor probe (not shown).

Part Numbers

TC-30

Temperature Controller
110-120 or 220-240 VAC
(specify on order)

C&L Instruments, Inc.

www.fluorescence.com

P OWE R

ON (1)

OF F (0)

MO NIT OR

AC T UAL

S ET

35

30 4 0

25 45

20 50

C

Model TC-30 Temperature Controller

37.0

OU TP UT

S YS T EM G AI N P OWE R

NO RM AL

C

LO W HIG H

AN AL OG
MON ITO R
10mV / C

R UN

S TA NDB Y

INH IB IT

(TT L HIG H IN )

C&L Instruments, Inc.

www.fluorescence.com

717-564-9491