Climax Technology Co FPKP1 Users manual

RREEMMOOTTEE KKEEYYPPAADD ((FFPP--KKPP))

Introduction

KP-FP is a Remote Keypad designed to have quick access control of the system control panel. The Keypad can send wireless
signals to and receive wireless signals from the Control Panel. The Remote Keypad can either be mounted on a flat surface or on
the wall with screws. It also has a tamper protection switch which will be activated upon any unauthorized attempt to open the
back cover.



PPaarrttss IIddeennttiiffiiccaattiioon

n

1. Trouble LED (Blue)

- The LED will flash every 5 seconds when fault exists under “Home Armed” or “Home Armed without Exit Delay”
mode.

- The LED will be turned ON for 1 second when there is alarm memory under “System Disarmed” mode.

2. Low Battery LED (Yellow)

- The LED will flash every 5 seconds when the battery voltage is low under “Home Armed” or “Home Armed without
Exit Delay” mode.

3. LED ON/OFF Control

- Press both 1 and 2 keys together to turn on or off the LEDs.

4. Send Learning Code

- Press both 1 and 3 keys together to send a learning code.

5. Fire Alarm

- Press both 4 and 6 keys together to trigger a fire alarm.

6. Medical Alarm

- Press both 7 and 9 keys together to trigger a medical alarm.

7. Panic Alarm

- Press both # and  keys together to trigger a panic alarm.

8. Frontpoint Logo LED (Green/Red/Amber)

- Green: activation of Disarm mode.

- Red: the system is in Away Armed mode.

- Amber: the system is in Home Armed mode.

9. Disarm Key

10. Home Key

- This key is used for entering “Home Armed” mode.

Quick Arm:

- Press the Home Arm Key will enter “Home Armed” mode.

- Press and hold the Home Arm Key for over 3 seconds, release the button and the Remote Keypad will enter “Home
Armed without Exit Delay” mode.

Arm with User PIN Code:

- Enter user PIN Code and press the Home Arm Key will enter “Home Armed” mode.

- Enter user PIN Code and press and hold the Home Arm Key for over 3 seconds, release the button the Remote Keypad
will enter “Home Armed without Exit Delay” mode.

11. Away Key

- This key is used for entering “Away Armed” mode.

1

Quick Arm:

- Press the Away Arm Key will enter “Away Armed” mode.

Arm with User PIN Code:

- Enter user PIN Code and press the Away Arm Key will enter “Away Armed” mode.

12. Tamper Switch

- The Tamper Switch protects the Remote Keypad from unauthorized cover opening.

13. Battery Compartment

14. Mounting Holes x 2

Features

 LED Indicator

Conditions LED Behavior

Flash every second

Yellow Low Battery LED

Flash every 5 seconds

When the system is counting down with Exit/Entry
Delay under low battery condition.

When the system is changed to Home Armed or
Away Armed mode under low battery condition.

Blue Trouble LED

Green Frontpoint Logo LED

(System Disarmed)

Amber Fronpoint Logo LED

(Home Armed or Home

Armed without Exit Delay)

Turn on for 1 second:

Turn on for 3 seconds

Flash every 5 seconds

Flash 5 times:

Flash Quickly for 5
times:

Turn on for 5 seconds

Flash every second for
3 seconds

Turn on for 5 seconds

Flash every second Home Armed with Exit/Entry Delay.

Flash every 5 seconds

Turn on for 5 seconds

When alarm memory exists in Disarmed mode.

If the Remote Keypad does not receive the
acknowledgement from the Control Panel within 20
seconds after mode change request is submitted.

When fault condition exists in Home Armed or
Home Armed without Exit Delay mode.

The Remote Keypad does not receive
acknowledgement from the Control Panel within 60
seconds after learning code is sent.

When incorrect PIN Code is submitted or when the
system is armed with fault or operation error.

When the system is changed to System Disarmed
mode.

When the system is changed to Away Armed
mode with Exit/Entry Beeps.

When system is changed to Home Armed or Home
Armed without Exit Delay mode.

When the system is in Home Armed or Home
Armed without Exit Delay mode.

When the system is changed to Away Armed
mode.

Red Frontpoint Logo LED

(Away Armed)

Battery and Low Battery Detection



 The Remote Keypad uses two AA Alkaline batteries as its power source.
 The Remote Keypad can also detect the battery status. When the battery voltage is low, a low battery signal will be sent

along with regular signal transmissions to the Control Panel, and the Low Battery LED (yellow) will light up, flash, or dim
in accordance with the LED of the Frontpoint logo.

Flash every 0.5 second When the system is alarming.

Flash every second Away Armed mode with Entry/Exit Delay.

Flash every 5 seconds

When the system is in Away Armed mode.

 Tamper Protection

 The Remote Keypad is protected against any unauthorized attempt to open the back cover with a tamper switch. When

the back cover is opened, the tamper switch will be triggered and the Remote Keypad will transmit a tamper open signal
to the system control panel.

 After replacing the back cover, the Remote Keypad will transmit a tamper restore signal to the system control panel.

2