Climate Master Accessories Submittal Data
Accessories
Submittal Data
English Language/I-P Units
SUBMITTAL DATA
Unit Designation:
Job Name:
Architect:
Engineer:
Contractor:
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each
Rev.: February 18, 2016
product at the time of order may be changed without notice and may not be as described herein. Please contact
ClimateMaster's Customer Service Department at 1-405-745-6000 for specifi c information on the current design and
specifi cations. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely ClimateMaster's opinion or commendation of its products.
The latest version of this document is available at climatemaster.com.
*LC294* LC294
Rev.: February 18, 2016
Accessories Submittal Data Eng/I-P
This Page Intentionally Left Blank
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 2
Accessories Submittal Data Eng/I-P
Table of Contents
*Page Number
Hose Kit Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AHK**** 1/2” to 1-1/4” Stainless Steel Braided Hose Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
AHK**** 1-1/2” to 2-1/2” Stainless Steel Braided Hose Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AHA**** 1/2” to 1-1/4”Stainless Steel Braided Hose Kit with Ball Valves . . . . . . . . . . . . . . . . . 7
AHA**** 1-1/2” to 2”Stainless Steel Braided Hose Kit with Ball Valves . . . . . . . . . . . . . . . . . . 8
AHB****-**** 1/2” to 1-1/4”Stainless Steel Braided Hose Kit with Automatic
Balancing Valve and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AHB****-**** 1/2” to 1-1/4”Stainless Steel Braided Hose Kit and Ball Valves . . . . . . . . . . . . . 10
AHB****-**** 1-1/2” to 2” Stainless Steel Braided Hosed Kit with Automatic
Balancing Valve and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
AHB****-**** 1-1/2” to 2”Stainless Steel Braided Hosed Kit with Automatic
Balancing Valve and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AHC****-**** 1/2” to 1-1/4” Stainless Steel Braided Hose Kit with Automatic
Balancing Valve, “Y” Strainer and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AHC****-**** 1/2” to 1-1/4” Stainless Steel Braided Hose Kit with Automatic
Balancing Valve, “Y” Strainer and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AHC****-**** 1-1/2” to 2” Stainless Steel Braided Hose Kit with Automatic
Balancing Valve, “Y” Strainer and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AHC****-**** 1-1/2” to 2” Stainless Steel Braided Hose Kit with Automatic
Balancing Valve, “Y” Strainer and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AHS****-**** 1/2” to 1-1/4” Stainless Steel Braided Hose Kit with “Y” Strainer
and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AHS****-**** 1-1/2” to 2”Stainless Steel Braided Hose Kit with “Y” Strainer
and Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AHH**** 1/2”, 3/4” and 1’’ (TRM/816 series only) Stainless Steel Braided Hose Kit . . . . . . . . 19
Water Valves and Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ALCP Loop Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Accessory Electric Heater - AH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
AFF-------- 1” and 2” Air Filter Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Accessory Filter Frames - Table 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessory Secondary Drain Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
*Document page number is shown next to part number (e.g. LC294 - 3 = page 3). Since not all pages are typically used in
the submittals process, the page number in the lower right corner can still be used (page ____of_____).
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 3
Accessories Submittal Data Eng/I-P
Hose Kit Nomenclature
Hose Kit Type
AHA = Hose Assembly w/Ball Valve
AHC = AutoFlow w/Strainer & Blowdown Assembly
All hose kit part numbers contain 2 hoses
AHB = AutoFlow Hose Assembly
AHS = Y Strainer and Ball Valve
AHK = Hoses Only
Unit Water Connection Sizes
Unit Size
TRC TC TR TS TT TY TZ TMW TL TRE
006
009
012
015
018
024 / 026
030
036 / 038
041 / 042
048 / 049
060 / 064
070 / 072
084
096
120
144
150
160
168
192
240
300
170
340
360
600
840
0.50 0.50 0.50 0.50 1.75 2.25
0.50 0.50 0.50 0.50 2.25 3
0.50 0.50 0.50 34
0.75 0.50 0.50 0.75 3.50 4.50
0.50 0.50 0.50 1.25 1.50
0.75 0.75 0.75 0.75 0.75 0.75 4.50 6
0.75 0.75 0.75 0.75 0.75 6 8
0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 7 9
0.75 0.75 1.00 0.75 0.75 8 11
1.00 1.00 1.00 1.00 1.00 1.00 0.75 9 12
1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 12 15
1.25 1.00 1.00 1.25 14 18
1.25 1.50 1.50 18 24
1.50 1.5 1.50 1.50 23 30
2.00 30 40
2.00 2.00 2.00 30 40
2.00 2.00 2.00 45 60
2.50 2.50 60 75
1 2 3 8 9 10 11 127
4 5 6
AHK 075
Diameter
0.50" = 050
0.75" = 075
1.00" = 100
1.25" = 125
1.50" = 150
2.00" = 200
2.50" = 250
1 = One Foot - AHK Only
Length
2 = Two Feet
Water Connection Diameter Table
2
-
* * * *
Flow Rate - AutoFlow Only
4 Digit Flow Rate for AutoFlow
Hose Kits Only (AHB & AHC)
Flow Rates Available - See Tables
With Kits
1.50 15 20
2.00 30 40
2.00 40 50
2.00 18 35
2.00 35 70
2.00 45 90
2.50 75 150
2.50 105 210
Flow Rate Example
GPM number
0.75 = -0075
4.50 = -0450
18.00 = -1800
AHK0752
3/4” kit
AHB0752-0450
3/4” kit, 4.5 gpm
AHB1002-1200
1” kit, 12.0 gpm
Typical Autofl ow Flow
Rate Range (gpm)
1.50 30 40
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 4
Accessories Submittal Data Eng/I-P
AHK**** 1/2” to 1-1/4” Stainless Steel Braided Hose Kit
Specifi cations:
• Designed for water source heat pump applications.
• Kevlar® reinforced EPDM core with ANSI 302/304 stainless steel outer braid.
• Fire rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
• NPT (External Pipe Thread) fitting at one end; swivel connector and adapter with NPT (External Pipe Thread) at the
other end (swivel to adapter connection via fiber or EPDM gasket).
• Swivel connection provides union between heat pump and piping system.
• Brass fittings, stainless steel ferrules for 1/2” to 1”, aluminum ferrules for 1-1/4”.
• FluidTemperature range of 15°F [9°C] to 180°F [82°C] (Operation below 32°F requires antifreeze).
• Max. working pressure of 400 psi [2756 kPa] for 1/2”, 3/4” and 1” hose kits; max. working pressure of 300 psi [2067 kPa]
1-1/4” hose kits.
• Min. burst pressure of four times working pressure.
Adapter
Female Swivel
NPSH Thread
Stainless Steel Outer Braid
Return
NPT (E)
Length (FACE - END)
Supply
Physical Data
Part #
AHK0501 0.50 [12.7] 1 [30.5] 400 [2756] 1600 [11024] 2.5 [63.5] 3.9
AHK0502 0.50 [12.7] 2 [61] 400 [2756] 1600 [11024] 2.5 [63.5] 3.5
AHK0752 0.75 [19.1] 2 [61] 400 [2756] 1600 [11024] 4.5 [114.3] 12.8
AHK1002 1.00 [25.4] 2 [61] 400 [2756] 1600 [11024] 5.5 [139.7] 21.5
AHK1252 1.25 [31.8] 2 [61] 300 [2067] 1200 [8268] 7 [177.8] 29.0
*1 ft. (30.5 cm) hose kit is typically used for console units.
Hose Size
inches [mm]
Length
feet [cm]
Working Pressure
psi [kPa]
Min. Burst Pressure
psi [kPa]
Min. Bend Radius
inches [mm]
NPT (E)
Cv
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 5
Accessories Submittal Data Eng/I-P
AHK**** 1-1/2” to 2-1/2” Stainless Steel Braided Hose Kit
Specifi cations:
• Designed for water source heat pump applications.
• Kevlar
• Fire rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
• NPT (External Pipe Thread) fitting at one end; swivel connector and adapter with NPT (External Pipe Thread) at the
• Swivel connection provides union between heat pump and piping system.
• Brass fittings aluminum ferrules.
• Fluid Temperature range of 15°F [9°C] to 180°F [82°C] (Operation below 32°F requires antifreeze).
• Max. working pressure of 300 psi [2067 kPa].
• Min. burst pressure of four times working pressure.
®
reinforced EPDM core with ANSI 302/304 stainless steel outer braid.
other end.
Adapter
Female Swivel
NPSH Thread
Stainless Steel Outer Braid
NPT (E)
Return
NPT (E)
Length (FACE - END)
Supply
Physical Data
Part #
AHK1502 1.5 [38.1] 2 [61] 300 [2067] 1200 [8268] 8.5 [216] 54.0
AHK2002 2.0 [50.8] 2 [61] 300 [2067] 1200 [8268] 9.5 [241.3] 68.0
AHK2502 2.5 [63.5] 2 [61] 300 [2067] 1200 [8268] 16.0 [406.4] 200.0
Hose Size
inches [mm]
Length
feet [cm]
Working Pressure
psi [kPa]
Min. Burst
Pressure
psi [kPa]
Min. Bend Radius
inches [mm]
Cv
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 6
Accessories Submittal Data Eng/I-P
AHA**** 1/2” to 1-1/4”Stainless Steel Braided Hose Kit with Ball Valves
Specifi cations:
• Designed for water source heat pump applications.
• Kevlar® reinforced EPDM core with ANSI 302/304 stainless steel outer braid.
• Fire rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
• NPT (Internal Pipe Thread) Ball valve at one end; swivel connector and adapter with NPT (External Pipe Thread) at the
other end (swivel to adapter connection via fiber or EPDM gasket).
• Swivel connection provides union between heat pump and piping system.
• Brass fittings, stainless steel ferrules.
• Full port ball valve with integral P/T (pressure/temperature) ports.
• Fluid Temperature range of 15°F [9°C] to 180°F [82°C] (Operation below 32°F requires antifreeze).
• Max. working pressure of 400 psi [2756 kPa] for 1/2”, 3/4”, and 1” hose kits; max. working pressure of 300 psi [2067
kPa] for 1-1/4” hose kits.
• Min. burst pressure of four times working pressure.
Ball Valve With
Adapter
1 PT Port
NPT
(E)
Female Swivel
NPSH Thread
Stainless Steel Outer Braid
Return
Length (FACE - END)
Supply
Physical Data
Part #
AHA0502 0.50 [12.7] 2 [61] 400 [2756] 1600 [11024] 2.5 [63.5]
AHA0752 0.75 [19.1] 2 [61] 400 [2756] 1600 [11024] 4.5 [114.3]
AHA1002 1.00 [25.4] 2 [61] 400 [2756] 1600 [11024] 5.5 [139.7]
AHA1252 1.25 [31.8] 2 [61] 300 [2067] 1200 [8268] 7 [177.8]
Hose Size
inches [mm]
Length
feet [cm]
Working Pressure
psi [kPa]
Min. Burst Pressure
psi [kPa]
NPT (I)
Ball Valve With
1 PT Port
Min. Bend Radius
inches [mm]
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 7
Accessories Submittal Data Eng/I-P
AHA**** 1-1/2” to 2”Stainless Steel Braided Hose Kit with Ball Valves
Specifi cations:
• Designed for water source heat pump applications.
• Kevlar
• Fire rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
• NPT (Internal Pipe Thread) Ball valve at one end with hose swivel connector; with NPT (External Pipe Thread)
• Swivel connection provides union between heat pump and piping system.
• Brass fittings; aluminum ferrules.
• Full port ball valve with integral P/T (pressure/temperature) ports.
• Fluid Temperature range of 15°F [9°C] to 180°F [82°C] (Operation below 32°F requires antifreeze).
• Max. working pressure of 300 psi [2067 kPa].
• Min. burst pressure of four times working pressure.
®
reinforced EPDM core with ANSI 302/304 stainless steel outer braid.
connection at the other end.
SOLID MALE
NPT (E)
Stainless Steel Outer Braid
FEMALE SWIVEL
NPSH THREAD
Adapter
Return
LENGTH (FACE - END)
Stainless Steel Outer Braid
Supply
Physical Data
Part #
AHA1502 1.5 [38.1] 2 [61] 300 [2067] 1200 [8268] 8.5 [216]
AHA2002 2.0 [50.8] 2 [61] 300 [2067] 1200 [8268] 9.5 [241.3]
Hose Size
inches [mm]
Length
feet [cm]
Working Pressure
psi [kPa]
Min. Burst Pressure
psi [kPa]
Ball Valve With
1 PT Port
NPT (I)
Ball Valve With
1 PT Port
Min. Bend Radius
inches [mm]
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 8
Accessories Submittal Data Eng/I-P
AHB****-**** 1/2” to 1-1/4”Stainless Steel Braided Hose Kit with
Automatic Balancing Valve and Ball Valves
Specifi cations:
• Designed for water source heat pump applications.
• Kevlar
• Fire rated materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
• NPT (Internal Pipe Thread) Ball valve at one end; swivel connector and adapter with NPT (External Pipe Thread) at the
• Swivel connection provides union between heat pump and piping system.
• Brass fittings, stainless steel ferrules for 1/2” to 1”, aluminum ferrules for 1-1/4”.
• Full port ball valve with integral P/T (pressure/temperature) port on supply hose.
• Automatic balancing valve with integral P/T ports and full port ball valve on return hose.
• Fluid Temperature range of 15°F [9°C] to 180°F [82°C] (Operation below 32°F requires antifreeze).
• Max. working pressure of 400 psi [2756 kPa] for 1/2”, 3/4”, and 1” hose kits; max. working pressure of 300 psi [2067
• Min. burst pressure of four times working pressure.
®
reinforced EPDM core with ANSI 302/304 stainless steel outer braid.
other end (swivel to adapter connection via fiber or EPDM gasket).
kPa] for 1-1/4” hose kits.
$GDSWHU
%DOO9DOYH:LWK
$XWRPDWLF)ORZ5HJXODWRU
$QG373RUWV
137(
136+7KUHDG
5HWXUQ
/HQJWK)$&((1'
6WDLQOHVV6WHHO2XWHU%UDLG)HPDOH6ZLYHO
%DOO9DOYH:LWK
373RUW
6XSSO\
Physical Data
Part #
AHB0502-**** 0.50 [12.7] 2 [61] 400 [2756] 1600 [11024] 2.5 [63.5] See Table
AHB0752-**** 0.75 [19.1] 2 [61] 400 [2756] 1600 [11024] 4.5 [114.3] See Table
AHB1002-**** 1.00 [25.4] 2 [61] 400 [2756] 1600 [11024] 5.5 [139.7] See Table
AHB1252-**** 1.25 [31.8] 2 [61] 300 [2067] 1200 [8268] 7.0 [177.8] See Table
Hose Size
inches [mm]
Length
feet [cm]
Working Pressure
psi [kPa]
Min. Burst
Pressure
psi [kPa]
Min. Bend Radius
inches [mm]
Typ. Flow Rate
U.S. GPM [l/s]
137,
Range
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: February 18, 2016LC294 - 9
Loading...