Clifford Cyber 1 User Manual

Color profile: _DEFAULT.CCM - AGFA-AccuSet Series Composite

World-ClassAutoSecurity

D:\corel\DRAW\COVERS\Cov-cybs.cdr Thursday, March 19, 1998 8:36:32 AM

Standard Features of the Cyber 1

✔

Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or

replace the control unit and remote controls free of charge (see warranty card for full details).

✔

FACT™—False Alarm Control and Test

— One of many patented Clifford

innovations, FACT absolutely, positively ends recurring false alarms.

✔

A Pair of 2-Button/3-Channel Remote Controls — Fingertip command from a

typical range of 100 feet.

✔

AntiScan™

✔ Remote Door Lock/Unlock Outputs — No more fumbling with keys in the dark

or bad weather!

—Blocks the digital code scanners still used by some thieves.

A press of a button on the remote simultaneously arms Cyber 1 and locks your car’s power locks. Another press disarms and unlocks. (Some vehicles require optional relays.)

✔ Built-In Parking Light Flasher — Visually confirms door lock and system status.

✔

Remote Controlled Chirp Muting

— Silently arm or disarm the system

whenever you wish by pressing both buttons on the remote control.

✔

User-Selectable AutoArming™— Automatically arms itself

“passively”

if you forget. May qualify you for an insurance discount that could pay for the system (consult your insurance company).

AutoArming Enable/Disable — You may disable or re-enable AutoArming

with just a few flicks of a switch.

AutoArm & Lock™ — You may set the system to automatically lock the doors

every time the system AutoArms.

✔ All Electronic Piezo Sensor— An all-electronic vibration/impact sensor that

delivers the utmost reliability and provides more accurate discrimination between genuine intrusion attempts and non-threatening conditions (like a large truck passing by) that cause other sensors to false alarm.

✔ Patented AutoTesting™—Automatically tests all system triggers and sensors

every time you remotely arm and warns you if you accidentally arm your Cyber 1 system with the hood or trunk open.

Standard Features of the Cyber 1

✔

High-Output Siren —

Loud

siren wail for 30 seconds when the alarm detects an

(cont.)

intrusion attempt. The system then automatically resets and rearms.

✔ Patented Malfunction AutoBypass™ —In the unlikely event of a trigger or

sensor malfunction, your Cyber 1 will automatically bypass the malfunction and arm all other points to continue relentless protection of your vehicle.

✔

Patented Prior Intrusion Attempt Alert

— When you return to your vehicle and remotely disarm your Cyber 1, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away.

✔ Patented Remote Control Code Learning — Just a few flicks of a switch lets

you match to the system up to 4 different 2-button/3-channel Clifford remote controls. Just as easily, a lost or stolen remote control can be deleted.

✔ Advanced CMOS Microcomputer —Very large scale integration (VLSI)

microprocessor commands and monitors all system functions more than 1,000,000 times per second, yet it draws less power than the vehicle’s clock, so it won’t deplete your car battery like other alarms.

✔ Fault-Proof Starter Interrupt Output — With the addition of an optional relay,

the system will electronically prevent an intruder from starting the engine while the system is armed.

✔ Hood/Trunk Trigger Input— For full perimeter protection of the engine

compartment and trunk contents (may require optional pin switches).

✔ High-Luminescence LED Status Indicator — Adds visual deterrence and

identifies system status.

✔ Full-Time Remote Panic — If you feel threatened, you can remotely activate the

siren and flash the parking lights with just a press on your remote control.

✔

Valet Mode

— Permits vehicle servicing and valet parking without relinquishing

the remote control.

✔

Patented SmartPowerUp™ II — When power to the system is disconnected, the

system’s non-volatile memory always remembers the last state (armed, disarmed or valet mode) and returns to that state when power is restored. So if a thief disconnects the power and then restores it in an attempt to start the car, the system will re-arm and instantly sound the siren while immobilizing the vehicle.

+ 5 hidden pages