World-ClassAutoSecurity
TM
concept
50
Owner'sManual
Intheunlikelyeventyoueverexperienceaproblemthatyourlocal
AuthorisedCliffordDealercannotresolveforyou,youmaycallourtollfreeemergencyhelplineat0800526708duringnormalbusinesshours,
orpagernumber0399721739after-hours.
All Concept Series systems are covered by
one or more of the following Clifford Electronics USA patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375, 5,467,070 and other patents pending
Table of Contents
Standard Features of the Concept 5O . . . . . . . . . . . . . . . . 2
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . . 7
What each button/channel does . . . . . . . . . . . . . . . . . . . . . . . . . 7
AntiScan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Anti-CodeGrabbing (ACG) with Random Code Encryption . . . . . . 9
Unbreachable Digital ComLink . . . . . . . . . . . . . . . . . . . . . . . 9
AutoArming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
UltraSecure Coded Valet Mode . . . . . . . . . . . . . . . . . . . . . . 10
Your secret valet code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
To enable valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
To exit valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting your own secret valet code . . . . . . . . . . . . . . . . . . . . . . . 11
Dual-sensor protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Failsafe MultiPoint AutoImmobilisation . . . . . . . . . . . . . . . . . . 12
Remote controlled sensor override . . . . . . . . . . . . . . . . . . . . 12
How to interpret the LED status indicator . . . . . . . . . . . . . . . . . 12
How to interpret the chirps and indicator light flashes . . . . . . . . . . 13
Smart AutoTesting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . . . 13
Smart prior intrusion attempt alert . . . . . . . . . . . . . . . . . . . . . 14
Smart Self-Powered Siren . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FACT— False Alarm Control and Test . . . . . . . . . . . . . . . . . . . 14
TotalRecall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AutoLock/AutoUnLock . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Remote headlight activation OR window/sunroof closure . . . . . . . . 15
SmartPowerUp II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
UltraSecure Coded Programming Mode . . . . . . . . . . . . . . . 16
How to program user-selectable features . . . . . . . . . . . . . . . . . 16
Programming table for user-selectable features . . . . . . . . . . . . . 16
Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adding new remote controls . . . . . . . . . . . . . . . . . . . . . . . 17
Erasing the codes of lost or stolen remote controls . . . . . . . . . . . 17
1
Standard Features of the Concept 5O
✔ Thatcham-Evaluated— The Concept 50 complies with the British
Insurance Industry’s Criteria for Vehicle Security as evaluated by Thatcham,
the Motor Insurance Repair Research Centre.
✔
Lifetime Warranty
— The system control unit and remote controls are
covered for as long as you own the vehicle (see the warranty card for details).
✔ FACT — False Alarm Control and Test
— Another patented Clifford
innovation, FACT absolutely, positively puts an end to recurring false alarms.
✔ A Pair of 4-Button/12-Channel Remote Controls— Fingertip command
from a distance via the Rosewood or CarbonFibre style remote control.
✔ AntiScan— Blocks electronic scanners from disarming your system.
✔ Anti-CodeGrabbing (ACG) with Random Code Encryption— Since the
remote control never transmits the same code twice, the random code
encryption makes the remote control code-grabbers used by thieves
completely useless.
✔ Multiple-Car Control— Allows you to command Concept systems on your
other vehicle(s) with the same remote control.
✔ UltraSecure Coded Valet Mode— Ensures that no unauthorised person
can engage the valet mode to turn off the system as they can with other
brands of alarms.
✔ Patented Remote Control Code Learning
— Your Authorised Clifford
Dealer can match up to a total of four 12-channel ACG remote controls to
the system. In addition, the code of a lost or stolen remote can be deleted
immediately to ensure that the missing remote control can never again be
used to disarm your system.
✔ Unbreachable Digital ComLink— Your Concept 50 maintains a coded
digital communications link between the central processing unit
microprocessor and the immobiliser’s microprocessor. If a thief tries
shorting, cutting or rerouting these lines, the coded data transfer will be
interrupted and your Concept 50 will ensure that the thief will not be able
to start the engine.
2
Standard Features of the Concept 5O (cont.)
✔ Failsafe MultiPoint Autoimmobiliser— Automatically ensures that your
vehicle is completely immobilised while you’re away. While armed, your
Concept 50 electronically disconnects your vehicle’s ignition system,
starter motor and electric fuel pump, making theft virtually impossible.
What’s more, even if a thief were to tear the Concept 50 control unit out
of your vehicle, he would
Clifford’s Failsafe circuitry assures your safety by making sure that the
immobilisation electronics cannot be activated while driving, even if the
system fuse were to blow.
be unable to start the engine! And
still
✔ Remote Headlight Activation Capability
— Remotely turn on the headlights to illuminate your way to and from your car for any duration you
wish between one second and two minutes (requires an optional relay).
✔
Remote Window and Sunroof Closure Capability
— On certain vehicles
(including several models of BMW, Volkswagen and Jaguar), the addition
of an optional relay enables the system to fully close all the power windows
and sunroof every time you arm the system with its remote control.
✔ Dual-Sensor Protection— Provides double the security via these two
high-technology Clifford sensors:
The system’s Glass Tampering Sensor detects any attempts to break any of
the vehicle’s windows.
The Volumetric Radar Sensor will immediately activate the alarm if anyone
reaches into your vehicle’s passenger compartment. Unlike ultrasonic
sensors, the Volumetric Radar Sensor is impervious to wind and temperature
variations, guarding your vehicle even if the windows are left open.
✔ Remote Controlled Sensor Override— Just a press of a button on your
remote control instructs the system to override both sensors. It’s perfect
for those times when you need to leave a passenger or pet in the vehicle.
✔ Dual-Mode Chirp Silencing— Whenever you remotely arm or disarm, the
siren “chirps” and the indicator lights flash. Whenever you wish, you may
silence the chirps with either of these two methods:
Remote chirp muting — Just press button 3 to silently arm and disarm.
Long-term chirp silencing — A few flicks of a switch is all it takes to silence
the chirps until you choose to reactivate them.
3
Standard Features of the Concept 5O
✔ Remote Door Locking/Unlocking— No more fumbling with keys in the dark
(cont.)
or bad weather. A single press of remote control button 1 simultaneously
arms the system and locks the doors, another press disarms and unlocks.
AutoLock — Automatically locks the doors when the ignition is turned “on”
AutoUnLock — Automatically unlocks when the ignition is turned “off”
✔ Patented Smart AutoTesting
— Automatically tests all sensors and triggers
every time you remotely arm and specifically identifies any malfunction.
✔
Patented Malfunction AutoBypass
— Automatically bypasses any trigger
or sensor malfunction and arms all other points to continue providing the
utmost possible protection.
✔ TotalRecall— Non-volatile memory stores the identity of the last trigger
or sensor activated to provide diagnostic information.
✔ Patented Smart Prior Intrusion Attempt Alert— Specifically identifies the
sensor or trigger activated by an attempted intrusion while you were away.
✔ AutoArming— Automatically (passively) arms itself if you forget.
Visual Acknowledgment — The indicator lights flash twice to confirm
initiation of the 30-second AutoArming countdown.
User-Selectable Lock upon AutoArming — Allows you to set the system to
automatically lock the doors every time the system AutoArms.
✔ Advanced CMOS Microprocessor— Commands and monitors all system
functions more than 1,000,000 times per second, yet draws less power
than your vehicle’s clock.
✔ Remote Controlled Courtesy Lighting— Turns on your car’s interior lights
when you disarm and keeps them on for 30 seconds or until you start the
engine, whichever occurs first.
✔ Built-In Indicator Light Flasher— Visually confirms alarm status from a
distance, and repeatedly flashes the indicator lights when the alarm is
tripped.
✔ Control Unit with 4 Channels — For accessories such as a remote boot
release, power window control, memory seat activation, remote headlight
activation, even remote engine starting.
4
Standard Features of the Concept 5O
✔ Channel 4 with Selectable Output Type— Your installer can set this
(cont.)
accessory output to pulsed operation (for use with a remote controlled
accessory such as a remote engine starter), latched on/off (to remotely
operate your car audio system) or timed (for remote headlight activation
or remote window/sunroof closure on certain vehicles).
✔
Smart Self-Powered Siren— Built-in battery keeps the siren wailing even if
all wires are cut! Won’t drain your car battery like other battery back-up
sirens.
User-Selectable 30/60 second siren duration.
Low Battery Warning — Automatically alerts you if the voltage of the siren’s
built-in battery is low or if it fails to hold a charge.
Patented Automatic Noise Abatement — Limits alarm sounding to five siren
duration cycles to prevent battery drain and towing of the vehicle due to
noise pollution.
✔
High-Luminescence LED Indicator
— Adds visual deterrence and provides
visual confirmation of system status.
✔ Full-Time Remote Panic Feature
— Remotely activate the siren and
flashing indicator lights from inside or outside the vehicle, or even while
driving.
✔ Multiple Trigger/Sensor Inputs— For greater security and precise
identification of the exact trigger or sensor tripped in a prior intrusion
attempt.
✔ SmartPowerUp II— The system’s non-volatile memory always remembers
what state (armed or disarmed) it is in even if power is removed. If a thief
removes power while the system is armed and then restores it in an
attempt to steal your car, Concept 50 instantly re-arms itself and sounds
the siren.
5
Welcome to the world of high-technology
vehicle security and convenience
ongratulations on the purchase of your Clifford Concept 50
C
remote controlled vehicle security and convenience system.
Your Concept 50 is packed with protective features and
lifestyle-enhancing convenience benefits, including
Anti-CodeGrabbing with Random Code Encryption that fights off
the latest and most onerous threat from high-tech thieves.
A thief with a code-grabber can record with total impunity the codes
of your car alarm’s remote control from up to several hundred
meters away. How? The thief simply waits for you to arm or disarm
your alarm with your remote control. The thief’s portable,
pocket-sized code-grabber will automatically pick and record the
transmitted code off the air. As soon as you walk away, he simply
plays it back, instantly disarming your alarm and unlocking the
doors. It’s like giving the thief your car keys. Code-grabbing will
instantly defeat other brands of remote controlled car alarms,
regardless of whether they are equipped with anti-scanning or
trillions of digital codes.
Clifford’s unique PlainView Coded Programming switch ensures that
no unauthorised person can tamper with your system’s programming
nor add a secret remote control to command your system. Concept
50’s built-in Failsafe MultiPoint Immobiliser assures your vehicle
cannot be driven away by even the most determined thief. We have
even encased the immobilisation electronics in solid steel for extra
security. Plus there’s Clifford’s ingenious Digital ComLink that
assures protection even if a thief tampers with power to the system.
Concept 50 also has remote controlled chirp muting, built-in
circuitry for remote headlight control or, on certain vehicles, remote
window rollup that saves you the cost of optional modules. The
system’s pair of 4-button remote controls let you remotely command
up to 12 different functions easily and effortlessly. Yet despite all
the sophistication, your Concept 50 is amazingly easy to use: never
more difficult than a few flicks of a switch or a press of a button on
one of your miniature keychain remote controls.
6
How to use your keychain remote control
Your remote control can command 12 different functions and options. The LevelShift
button on the side of the remote control allows you to select channels 5–12:
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For
instance, to transmit channel 3, press button 3. While you transmit, the LED
indicator will flash once every second: this indicates level 1.
To transmit either channel 5, 6, 7 or 8:
Press the
LevelShift button once. This shifts buttons
1–4 to level 2 (channels 5–8). Then press the
corresponding button within the next 7
seconds. For instance, to transmit channel 5,
press LevelShift once, then button 1. While
you transmit, you’ll notice that the LED
indicator flashes twice, pauses, flashes twice,
etc.: this indicates level 2.
To transmit channel 9, 10, 11 or 12:
Press LevelShift twice to shift buttons 1–4 to
level 3 (channels 9–12), then press the corresponding button. Thus, to transmit
channel 10, press LevelShift twice, then button 2. You’ll notice that the LED
flashes three times, pauses, flashes three times, etc.: this indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12),
the remote control automatically returns to level 1 (channels 1–4).
What each button/channel does
Certain channels command certain functions. The chart below indicates what each
remote control channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Press
Transmitting
channel
number:
1 arm or disarm and lock or unlock the doors no — 1
2 activate a remote controlled option no — 2
3 silently arm or disarm no — 3
4 turn on headlights*, close windows* or activate an accessory no — 4
5 control a Concept 50 on your second vehicle yes once 1
6 control a Concept 50 option on your second vehicle yes once 2
7 control a Concept 50 on your third vehicle yes once 3
8 control a Concept 50 option on your third vehicle yes once 4
9 remotely override both system sensors (see page 12) yes twice 1
10 control a Concept 50 on your fourth vehicle yes twice 2
11 control a Concept 50 option on your fourth vehicle yes twice 3
12 control a Concept 50 on your fifth vehicle yes twice 4
Causes the system to:
7
Press the
LevelShift
button?
* Requires optional wiring and a relay
How
many
times?
button
number
TO ARM
THE SYSTEM . . . . . . .
Press button 1/channel 1 once. You will hear two chirps and
the indicator lights will flash twice. The system LED will flash
repeatedly and the vehicle’s doors will automatically lock.
TO DISARM
THE SYSTEM . . . . . . .
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
TO ACTIVATE
A REMOTE
CONTROLLED
ACCESSORY . . . . . .
TO REMOTELY
TURN ON THE
HEADLIGHTS,
CLOSE THE WINDOWS
OR CONTROL
ANOTHER OPTION. .
Press button 1/channel 1 again. One chirp and one indicator
light flash confirms disarming. The doors will automatically
unlock and the interior lights will turn on and stay on for 30
seconds or until you start the engine, whichever occurs first.
Press button 3/channel 3. Concept 50 will arm or disarm with
all the indications noted above except for the chirps.
Press and hold button 1/channel 1 for 3 seconds. The indicator
lights will flash repeatedly and the siren will blare for 30 or 60
seconds (user-selectable), or until you transmit channel 1 again to
turn it off. For your personal safety, if the ignition is on (indicating you are in the vehicle), the doors automatically lock to
prevent entry. If the ignition is off, the doors automatically unlock
to allow you to enter without having to fumble with the keys.
Button 2/channel 2 controls an option such as a remote boot
release, remote memory seat activation, the IntelliStart remote
engine starter accessory or another remote controlled option.
If so wired, button 4/channel 4 will either turn on the headlights
for a duration of your choosing (your installer can set the
duration to any interval you wish between one second and two
minutes) OR will close the power windows and sunroof on
various Jaguar, Mercedes Benz, BMW and Volkswagen
vehicles. Alternatively, this output could also be used for a
second remote controlled accessory such as those noted above.
TO CONTROL
YOUR
OTHER VEHICLES . . . .
WHAT ABOUT
CHANNEL 9? . . . . . . .
Channels 5–8 and 10–12 (see Your 4-button/12-channel
remote controls on page 7) can be programmed to operate
Concept system(s) and optional accessories on your other
car(s).
Channel 9 remotely overrides both system sensors. See
Remote controlled sensor override on page 12.
8
AntiScan
Thieves can disarm some other brands of car alarms with a “scanner” that rapidly
transmits one remote control code after another until it hits on the one that disarms
the alarm. Clifford’s AntiScan detects any scanner and blocks the codes it generates.
Anti-CodeGrabbing (ACG) with Random Code Encryption
ACG protects you and your automobile from the most effective and onerous car
stealing device ever used by car thieves — a code-grabber. Code-grabbers literally
record, from hundreds of meters away, the code sent by your car alarm remote
control. Then the thief simply plays back the code when you’re gone, instantly
disarming the alarm and unlocking the doors. Your Concept 50 has Clifford
Electronics’ proprietary ACG technology, which uses complex proprietary digital
signal processing and unbreachable encryption to randomly change the digital code
every time you use the remote control. Your remote will never transmit the same
code twice, and the control unit will never accept the same code twice.
Clifford Electronics also offers an optional ACG interface (#64-128/ACG) to your
electric garage door/gate opener that not only allows you to command your garage
door and/or gate opener(s) via your Clifford remote control, but also protects your
garage and home from burglars with code-grabbers.
Unbreachable Digital ComLink
This ingenious Clifford feature guards against any possibility of a thief tampering
with the system. Concept 50 maintains a coded digital communications link
between the central processing unit microprocessor and the immobiliser’s
microprocessor. If a thief tries shorting, cutting or rerouting these lines, the coded
data transfer will be interrupted and Concept 50 will instantly immobilise the
vehicle and ensure that a thief will not be able to start the engine.
AutoArming
If you forget to remotely arm your Concept 50, the alarm it will arm itself
automatically (“passively”) 30 seconds after the ignition has been turned off and all
the vehicle doors are closed. For your convenience, if you re-open any door(s)
within the 30-second count- down, alarm AutoArming will restart from the
beginning once all doors are closed.
Visual acknowledgment:
Five seconds after you exit the vehicle and close all
the doors, the indicator lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
Lock upon AutoArming: To ensure you can’t accidentally lock your keys inside
the car, the system is preset not to lock the doors upon AutoArming. To change
this setting, see
UltraSecure Coded Programming Mode
9
on pages 16-17.
UltraSecure Coded Valet Mode
Your secret valet code
In seconds, thieves can disable all other alarm brands by hotwiring the ignition and
flicking an easy to find “hidden” valet switch. Your system has safeguards that
absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your
system. How? To enable valet mode, the driver must first enter a secret valet code on
the PlainView switch. Your code will be a 1-to-3-digit number of your choosing.
Each digit can be any number from 1 to 9, (i.e. the code can be any number between
1 and 999, except those that contain a zero). Whenever the system is in valet mode,
it overrides the AutoArming feature (see page 9) and all the security features are
turned off. At various times, you will need to switch the system off. For instance,
when having your car serviced, washed or parked by a valet.
Your factory-set valet code is the single digit “2.”
NOTE: If you temporarily lose the use of your remote controls, you can disarm
the system by enabling valet mode.
Definitions
Digit: A digit is defined as any number from 1 to 9, inclusive.
Valet code: A valet code may be 1 to 3 digits:
A one-digit code=X=any number between 1-9
A two-digit code=XY=any number between 11-99 (excluding numbers with zeros)
A three-digit code=XYZ=any number between 111-999 (excluding zeros)
Remember, no code can have a zero.
PlainView switch:
switch has three positions: 1.) Latched 2.) Centre 3.) Spring-loaded momentary.
When you press the latched side, the switch remains in its pressed position. When
you press the momentary side, the switch bounces back to the centre position.
Entering a digit:
(spring-loaded) side of the PlainView switch the number of times
corresponding to the numeral of the digit to be entered, followed by pressing
to the latched side, then returning the switch to its centre position.
Entering a code: If your code has only one digit, enter the code as described in
“Entering a digit,” then return the switch to its centre position. If your code has
more than one digit, just repeat the above for each digit of your code, then
return the switch to its centre position.
A rocker switch mounted on the dashboard or console. The
To enter a digit, you tap (press and release) on the momentary
To enable valet mode
1. Turn the ignition switch to its “ON” position or start the engine.
2. Enter your valet code on the PlainView switch, then return it to its centre position.
3. You now have 5 seconds to press the latched position to enter valet mode. The
system LED will glow continually for on-going visual confirmation of valet mode.
10
To exit valet mode
1. Turn the ignition switch to its “ON” position or start the engine.
2. Flick the switch back to its centre position. The LED will turn off to confirm that
the system is now in its normal operating mode.
Setting your own secret valet code
Since all Concept 50 systems have the same factory-set code, it is highly advisable
that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that
does not have any zeros. You can also change the code whenever you want.
1. Write down the 1-to-3 digit code you wish to use (remember, no zeros in the code).
2. Turn your vehicle’s ignition switch to its “ON” position.
3. Enter your current valet code (if setting a new code for the first time, enter the
factory-set code of “2” by tapping the momentary side of the switch twice, then
pressing the latched side).
4. When the LED turns on, immediately tap and release the momentary side of the
switch 6 times (after the first three taps, you will hear a single chirp confirmation
each time you tap the momentary side — in this case for a total of 3 chirps).
5. Immediately after the 3rd chirp, press the latched side, then enter your new code.
You’ll hear the same number of chirps as each digit of your code each time you
press the latched side. When done, return the switch to its centre position. Wait
until you hear 2 chirps and see the LED turn off, then turn the ignition off.
6. VERY IMPORTANT: You must test your new valet code. Wait at least 10
seconds, then turn on the ignition and re-enter your new code. The LED should
turn on. Return the switch to its centre position. NOTE: If the LED does not
illuminate, your new code was entered incorrectly. The system has
AUTOMATICALLY REVERTED TO THE PREVIOUS VALET CODE.
Example: Let’s say you want to change the code from its original single-digit
“2” code to a double-digit code of “31.” You would do the following:
Turn the ignition on, enter your current code, tap the momentary side of the
PlainView switch
momentary, momentary, momentary, latched (3 chirps), momentary, latched (1
chirp), centre. Wait for the 2 chirp confirmation and the LED to turn off, then turn
the ignition off. Wait 10 seconds, turn the ignition on and test the new code.
6 times
, press the
latched
side, then enter the new code:
Dual-sensor protection
Concept 50 has both a Glass Tampering Sensor and a Volumetric Radar Sensor. The
Glass Tampering Sensor detects attempts to break any of the vehicle’s windows.
For improved sensitivity in vans and other large vehicles, your installer can add a
second miniature microphone. The Volumetric Radar Sensor detects anyone leaning
into the passenger compartment, so it will protect your car even if it’s a convertible
or soft-top, or if you happen to leave the window(s) open. Unlike ultrasonic sensors,
the Volumetric Radar Sensor is impervious to wind and temperature variations.
11
Failsafe MultiPoint AutoImmobilisation
Concept 50 has a multipoint AutoImmobiliser that, when active, will immobilise
your vehicle by electronically interrupting the ignition, starter and fuel pump.
AutoImmobilisation occurs 30 seconds after you turn off the ignition. It will also
occur 30 seconds after disarming the system. AutoImmobilisation is completely
independent of the alarm’s AutoArming feature. The dashboard LED will
repeatedly flash slowly when the immobiliser is active, and rapidly when both the
immobiliser and alarm are active. Be aware that after disarming your Concept 50,
you must turn on the ignition within 30 seconds or AutoImmobilisation will occur.
NOTE: If the engine will not start, more than 30 seconds have passed since
remote disarming or since turning off the vehicle’s ignition switch. Thus, the
system has automatically engaged the immobilisation circuitry. You may deactivate immobilisation simply by pressing remote control button 1 or button 3
once to fully arm the system, then again to fully disarm.
Failsafe Operation: To ensure your safety, the immobilisation circuitry cannot
under any circumstances be activated while you are driving, even if the system
fuse were to blow.
Encased in Steel: To provide even greater assurance against any possibility of
tampering, Concept 50’s immobilisation electronics are encased in steel.
Remote controlled sensor override
Normally the sensors detect movement in the passenger compartment and
high-pitched sounds similar to glass breaking while the system is armed. Concept 50
lets you arm and then override the sensors via the remote control. It’s perfect when
you need to leave a passenger or pet in the vehicle. To override the sensors:
1. Arm with remote control button 1/channel 1.
2. Anytime thereafter, transmit channel 9 (LevelShift button twice, then press button
1).You will note that the vehicle’s indicator lights will flash four times to
confirm that the sensors have been overridden. The sensors will automatically be
reactivated the next time the system is armed.
How to interpret the LED status indicator
The LED on your car’s dashboard or console will inform you of the system status:
LED Condition Meaning
Off System is disarmed and in normal operating mode; you may drive the vehicle
On Valet mode is on
Flashing
Pause between flashes Either a malfunction (see page 13) or an intrusion was attempted (see page 14)
System is armed (also indicates that the AutoImmobilisation feature has engaged,
which occurs 30 seconds after the ignition is turn off; see page 12).
12
How to interpret the chirps and indicator light flashes
When you use the remote control, the system responds with chirps (unless the chirp muting
feature is turned on) and indicator light flashes:
Chirps and flashes Meaning
1 Your Concept 50 system is disarmed
2 Your Concept 50 system is armed
2 and then 4 Armed but one of the sensors is malfunctioning (see Smart AutoTesting on page 13)
3 Disarmed and there was an intrusion attempt (see Smart prior intrusion attempt on page 14)
4 Armed but the bonnet or boot is open (see Smart AutoTesting on page 13)
Smart AutoTesting
When remotely armed, your Concept 50 tests all triggers and sensors. If the
bonnet
or boot is open when you arm, your Concept 50 will immediately alert you of the
problem by issuing 4 chirps and 4 indicator light flashes instead of the usual 2 and
2. If one of the
is malfunctioning, you’ll receive the usual 2 chirps and
sensors
flashes, then, 5 seconds later, there will be 4 chirps and 4 flashes.
Specific malfunction identification: The system can also indicate the specific
malfunctioning trigger or sensor. This saves you time and money since your
installer won’t have to spend hours trying to determine where the problem is:
1. When you insert your key and turn on the ignition, the LED indicator inside the
vehicle will be flashing, pause, then repeat.
2. Count the number of flashes in one cycle between pauses (for your convenience,
the flash cycle repeats 5 times) and refer to the chart below:
Number of LED flashes between pauses Malfunction
1 flash Volumetric Radar Sensor
2 flashes Glass Tampering Sensor
4 flashes Boot trigger
5 flashes Bonnet trigger
Automatic malfunction bypass
To provide the utmost protection even if a system component malfunctions, your
Concept 50 will automatically bypass the faulty point and arm all
other
triggers and
sensors until you can have the system serviced by your local Authorised Clifford
Dealer. If you accidentally armed the system with the boot or bonnet open, simply
disarm, close it, then rearm. The system will then monitor that point again.
13
Smart prior intrusion attempt alert
If you hear three chirps (instead of the usual one chirp) upon disarming, it means the
system sounded in your absence. When you enter the vehicle and turn on the ignition (or
start the engine), the LED will flash several times, pause, then repeat the flash cycle 4
more times. Count the number of flashes in one cycle and refer to the chart on page 13.
Smart Self-Powered Siren
This siren has its own built-in back-up battery, so even if a thief cuts all the wires,
the siren will continue to wail. Comes with two security override keys in case you
ever need to turn off the siren.
Smart-charging: Other battery-backed sirens continually draw charging current
from your vehicle’s battery. In time, this can drain your battery. Clifford’s
Smart Self-Powered Siren only draws charging current while the vehicle’s
ignition is on, i.e., while you’re driving. This prevents battery drain.
Long-term chirp silencing: Whenever you wish, you may silence your Concept
50’s arm/disarm chirps until you wish to restore them. The indicator light
flashes will continue to provide visual confirmation of remote controlled arming
and disarming. See UltraSecure Coded Programming Mode on pages 16-17.
Remote controlled chirp muting: Remote controlled chirp muting capabilities
are especially valuable when parking late at night in a quiet residential area. To
arm or disarm silently, simply press button 3/channel 3 on your remote control
instead of the usual button 1/channel 1.
Siren duration:
When the system detects an intrusion attempt, the alarm is set to
sound for 30 seconds. However, if you prefer, you may change it to 60
seconds. See the UltraSecure Coded Programming Mode section on pages
16-17. To ensure against battery drain or towing of the vehicle due to noise
pollution, the siren will sound for no more than 5 continuous minutes.
Self-powered: If a thief were to cut the siren’s wires, the siren will continue to
sound for 5 minutes.
Low battery warning: If at any time the siren’s back-up battery voltage is low or
it fails to hold its charge, the normal arm and disarm chirps will be muted to
alert you of the problem. Once the back-up battery is charged, the chirps will
automatically be restored.
FACT— False Alarm Control and Test
With FACT, you’ll never experience repeated false alarms. If the siren goes off, DO
NOT remotely disarm the system; allow it to run for the full siren duration. Before
sounding a second time, the system automatically checks for another activated trigger
or sensor to verify that an intrusion is in progress. Should the siren sound again, you
will know for sure that someone is tampering with your vehicle. If you prefer, you
may disable or re-enable the FACT feature, see UltraSecure Coded Programming
Mode
on pages 16-17.
14
TotalRecall
The system’s memory records the identity of the last activated or malfunctioning
trigger or sensor. To identify the trigger and/or sensor held in the system’s memory:
1. With the ignition OFF, flick the PlainView switch to its latched side.
2. Press button 1/channel 1 to “arm” the system, then again to “disarm.”
3. The LED will flash 1–5 times, pause, then repeat the flash cycle 4 times.
4. Count the number of flashes in one cycle and refer to the chart below:
LED flashes per cycle Trigger/sensor indicated
1 flash Volumetric Radar Sensor
2 flashes Glass Tampering Sensor
3 flashes Door trigger
4 flashes Boot trigger
5 flashes Bonnet trigger
AutoLock/AutoUnLock
For the safety of you and your passengers, your Concept 50 system automatically
locks the doors when you turn on the ignition to start the engine, and unlocks them
when you turn off the ignition. If you prefer, you may disable or re-enable this
feature, see the UltraSecure Coded Programming Mode section on pages 16-17.
Remote headlight activation OR window/sunroof closure
The system’s channel 4 output can be optionally wired and programmed by your
installer to control either remote headlight activation OR, on certain vehicles,
remote power window/sunroof closure. Please see page 8: “To remotely turn on the
headlights . . . .” If button 4/channel 4 on your remote control activates the
headlights, your installer can set the system’s built-in timer to any interval between
one second and two minutes. This will allow you to activate your vehicle’s
headlights for the duration of your choosing to illuminate your way to and from the
vehicle. All it takes is a single press of button 4 on the remote control.
SmartPowerUp II
If power to the system is ever removed and restored, SmartPowerUp II automatically
resets the system to the same state it was in when power was cut. Thus, if a thief
removes and restores power in a theft attempt, the system will instantly reset itself
to its armed state, sound the siren and flash the indicator lights. (NOTE: Even when
no power is being supplied to the system, Concept 50’s three immobilisation points
— the ignition, starter and fuel pump — remain electronically disconnected to
ensure that a thief will fail in his attempt to steal your vehicle). However, if the
system is disarmed and your mechanic interrupts power, the system will
automatically and silently be restored to disarmed mode when he reconnects power.
15
UltraSecure Coded Programming Mode
Your Concept 50 vehicle security system allows you to set many of its features to
your own personal preferences. We have made the programming procedures very
simple: to make a change, you just press the PlainView switch a few times. The
system comes from the factory with all of its features pre-programmed as noted in
the table that follows. To change any of the settings, use the procedure noted. To
restore the feature to its factory setting, just repeat the procedure.
How to program user-selectable features
1. Select the feature you wish to program from the table that follows. Note the
number of momentary taps.
2. Turn your vehicle’s ignition switch to its “ON” position.
3. Enter your valet code (see page 10).
4. When the LED turns on, immediately tap and release the momentary side of the
switch the number of times indicated in the third column of the programming
table for the feature you selected (after the first three taps, you will hear a single
chirp confirmation each time you tap the momentary side).
a. If noted, perform the “secondary action.”
5. Return the switch to its centre position. You will hear 1 chirp and the LED will
turn off. Turn the ignition off.
6. Repeat steps 1-5 for any other features you wish to program.
Programming table for user-selectable features
Feature
Lock upon
AutoArming
Arm/Disarm
Chirp
Confirmation
Valet Code
AutoLock/
AutoUnLock
Siren
Duration
FACT ON 9 —
Factory
setting
OFF 4 —
ON 5 —
See Setting your own secret valet code on page 11. +
ON 7 —
30 sec. 8 —
# of
momentary
taps
Secondary
action
Program
completion
confirmation
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
Result
Change state from
OFF to ON or vice-versa
Change state from
ON to OFF or vice-versa
Change state from
ON to OFF or vice-versa
Change duration from 30 to
60 seconds or vice-versa
Change state from
ON to OFF or vice-versa
16
Example
To change the Lock upon AutoArming feature from its factory setting of off
to on, you would do the following:
Turn the ignition key to the ON position.
Enter your programming code, then immediately tap and release
the momentary side of the PlainView switch 4 times (you will hear a
single chirp upon the 4th press).
Wait 3 seconds. The system will sound one more chirp to confirm that
the Lock upon AutoArming setting has been changed.
Turn the ignition off.
That’s all there is to it!
Adding new remote controls
For other drivers in your family or if you wish to control Concept 50 systems on
your other cars with the same remote control, you can buy additional remote
controls from any Authorised Clifford Dealer, who can program them into the
system for you. Each Concept 50 will respond to as many as four Clifford ACG
remote controls. For security and insurance reasons, you must provide your
Authorised Clifford Dealer with three proof-of-ownership forms:
1. Your Clifford “Certificate of Installation/Ownership/Operation.”
2. A photocopy or the original purchase receipt of your Concept 50 (including
installation charge).
3. Proof of identity to match the name on both items 1 and 2 above.
Upon presentation of the above and verification of its authenticity, you may
purchase one or more new remote controls from your Authorised Clifford Dealer
who will programmed it (them) into your Concept 50 system.
Erasing the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, it poses an obvious security risk
to your vehicle since the missing remote control can be used to disarm your system.
Your Authorised Clifford Dealer can erase its code from the system memory to
make sure that the missing remote control can never be used to disarm your system.
To do this, you must bring your vehicle and all valid remote controls to your
Authorised Clifford Dealer for re-programming.
17
© Copyright Clifford Electronics, Inc., 1996 31-710D/UKC5om/496
Loading...