Clifford ARROW 5 User Manual
Arrow 5
OOwwnneerr’’ss GGuuiiddee
i
© 2003 directed electronics, inc.
limited lifetime consumer warranty
Directed Electronics, Inc. ("Directed") promises to the original purchaser to repair or replace
with a comparable reconditioned model any Directed unit (hereafter the "unit"), excluding
without limitation the siren, the remote transmitters, the associated sensors and accessories,
which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle provided the following conditions are met: the unit was professionally
installed and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in the vehicle in which it was originally installed by an authorized Directed dealer; and
the unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other
dated proof of purchase bearing the following information: consumer's name, telephone number and address; the authorized dealers name, telephone number and address; complete product description, including accessories; the year, make and model of the vehicle; vehicle license
number and vehicle identification number. All components other than the unit, including without limitation the siren, the remote transmitters and the associated sensors and accessories,
carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the original purchaser has not completed the warranty card
and mailed it within ten (10) days of the date of purchase to the address listed on the card; the
unit's date code or serial number is defaced, missing or altered; the unit has been modified or
used in a manner contrary to its intended purpose; the unit has been damaged by accident,
unreasonable use, neglect, improper service, installation or other causes not arising out of
defects in materials or construction. The warranty does not cover damage to the unit caused
by installation or removal of the unit. Directed, in its sole discretion, will determine what constitutes excessive damage and may refuse the return of any unit with excessive damage. TO
THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED
TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS
FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL
PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES
ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY
FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR
INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS
AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE
AGAINST VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS;
AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT
COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR
ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE
INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS
SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM
AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER'S
PURCHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL
ii
LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE,
THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an
implied warranty will last or the exclusion or limitation of incidental or consequential damages.
This warranty gives you specific legal rights and you may also have other rights that vary from
State to State.
This product may be covered by a Guaranteed Protection Plan ("GPP"). See your authorized
Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800.
Directed security systems, including this unit, are deterrents against possible theft. Directed is
not offering a guarantee or insurance against vandalism, damage or theft of the automobile,
its parts or contents; and hereby expressly disclaims any liability whatsoever, including without
limitation, liability for theft, damage and/or vandalism. Directed does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in
connection with this security system.
Make sure you have all of the following information from your dealer:
A clear copy of the sales receipt, showing the following:
z
Date of purchase
z
Your full name and address
z
Authorized dealer's company name and address
z
Type of alarm installed
z
Year, make, model and color of the automobile
z
Automobile license number
z
Vehicle identification number
z
All security options installed on automobile
z
Installation receipts
trademarks and copyrights
Bitwriter™, Clifford®, Code-Hopping™, DEI®, Directed®, Doubleguard®, ESP™, FailSafe®, Ghost
Switch
™
, Learn Routine™, Nite-Lite®, Nuisance Prevention Circuitry®, NPC®, Revenger®, Silent
Mode
™
, Soft Chirp®, Stealth Coding™, Stinger®, Valet®, Vehicle Recovery System®, VRS®, and
Warn Away
®
are all Trademarks or Registered Trademarks of Directed Electronics, Inc.
iimmppoorrttaanntt!!
Please note that this manual was intended for US consumers
and therefore includes American phrases or words.
1
© 2003 directed electronics, inc.
transmitter configurations . . . .2
what is included . . . . . . . . . . . .3
important information . . . . . . .3
system maintenance . . . . . . .4
your warranty . . . . . . . . . . . .4
fcc/id notice . . . . . . . . . . . . .4
transmitter functions . . . . . . . . .5
standard configuration . . . . .5
using your system . . . . . . . . . . .6
arming . . . . . . . . . . . . . . . . .6
disarming . . . . . . . . . . . . . . .7
disarming without
a transmitter . . . . . . . . . . . . .8
remote siren silencing . . . . . .8
transmitter chirp muting . . . .8
transmitter sensor disable . . .9
intellistart and smartwindows
sensor bypass . . . . . . . . . . . .9
auxiliary channel bypass . . . .10
panic mode with smart door
locking . . . . . . . . . . . . . . . . .10
valet mode . . . . . . . . . . . . . .10
transmitter valet mode . . . . .11
battery saver mode . . . . . . . .11
low battery warning . . . . . . .12
instant auto-arming bypass . .12
multiple event total recall . . .12
false alarm control technology
(FACT II) . . . . . . . . . . . . . . . .13
select siren sounds . . . . . . . . . . .14
diagnostics . . . . . . . . . . . . . . . . .15
arming diagnostics . . . . . . . .15
disarming diagnostics . . . . . .15
arm/disarm diagnostic chart .16
table of zones . . . . . . . . . . . .16
anti-code grabbing (ACG) . . . . .17
high frequency . . . . . . . . . . . . . .17
smart power up II . . . . . . . . . . .17
power saver mode . . . . . . . . . . .18
programming options . . . . . . . .19
manual programming
instructions . . . . . . . . . . . . . .20
user selectable features . . . . .22
user selectable features
descriptions - column one . . .23
user selectable features
descriptions - column two . . .25
user selectable features
descriptions - column three . .26
pin programming . . . . . . . . .28
glossary of terms . . . . . . . . . . . .30
security & convenience
expansions . . . . . . . . . . . . . . . . .32
health check . . . . . . . . . . . . . . . .33
table of contents
2
transmitter configurations
.
Arm/Disarm Button
Accessory Output
Button
Optional Accessory
Channel Button
DRW-376
3
© 2003 directed electronics, inc.
what is included
z
Arrow 5 control module and harness
z
Two three-button transmitters
z
XHF antenna/receiver with harness
z
Pre-wired blue status LED
z
PlainView 2 Valet switch
z
504C dual-stage shock sensor with harness
z
514C neo-siren
z
Presentation pack
z
Quick reference card
z
Two window decals
important information
Congratulations on the purchase of your state-of-the-art vehicle
security system. It has been designed to provide years of trouble-free
operation. This system must be installed by an authorized dealer.
Installation of this product by anyone other than an authorized dealer
voids the warranty. As verification of authorization, all authorized deal-
ers are provided with preprinted dealer certificates.
In order to maximize the use of this system, please review this owner's
guide carefully prior to using your system. You can print additional or
replacement copies of this owner’s guide by accessing the Clifford web-
site at www.clifford.com.
4
system maintenance
The system requires no specific maintenance. Your transmitter is powered by a miniature 3V lithium battery that will last approximately one
year under normal use. When the battery weakens, operating range will
be reduced and the system will provide a low battery warning chirp indication when disarming.
your warranty
Your warranty registration must be completely filled out and returned
within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. Make sure you receive
the warranty registration from your dealer. It is also necessary to keep
your proof of purchase, which reflects that the product was installed by
an authorized dealer.
fcc/id notice
This device complies with Part 15 of FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
Directed Electronics, Inc. 909595 Series
DRW-396
Tested to Comply
with FCC Standards
5
© 2003 directed electronics, inc.
transmitter functions
This system uses computer-based code learning to learn the transmitter buttons. This makes it possible to assign any transmitter button to
any system function. The transmitter initially comes programmed with
standard configuration, but may also be customized using the CliffNet
Wizard PC program. The buttons in all of the instructions in this manual correspond to a standard configuration transmitter.
standard configuration
Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output is controlled by this button.
Button
An optional accessory convenience or expansion function that you have
added to your system can be activated by pressing this button.
and Buttons
When pressed together, these buttons control silent arm and disarm.
and Buttons
When pressed together, these buttons disable the 504C shock sensor.
and Buttons
When pressed together, these buttons control the remote valet.
6
using your system
The buttons used in the instructions in this manual correspond to the
standard transmitter configuration. If your transmitter has been custom
configured, the icons on your transmitter buttons may not correspond
to the indicated functions.
arming
You can activate, or arm, the system by pressing on your trans-
mitter for one second. When the system arms, you will hear two short
siren sounds, or chirps, and see the parking lights flash twice. The LED
will begin to flash steadily. If the vehicle’s power door locks have been
connected to the system, the doors will lock.
While the system is armed, the LED status indicator will flash approxi-
mately once per second showing that the system is actively protecting
your vehicle. If you hear more than two chirps when arming, refer to
the Diagnostics section of this guide. These extra chirps confirm a mal-
function autobypass.
The security system also can be programmed to arm itself
automatically (called passive arming). If the system is programmed for
passive arming, it will automatically arm 30 seconds after the ignition is
turned off and the system sees you leave the vehicle by opening and
closing a door. Whenever the system is in its 30-second passive-arming
countdown. The siren will chirp twice and the lights will flash twice five
seconds after the last door has been closed. The system is not actually
armed at that point. The system arms and the doors lock (if connected
and programmed for passive locking) at 30 seconds, but the siren will
7
© 2003 directed electronics, inc.
not chirp. The early chirps provide you with a 25-second warning prior
to arming.
When armed, your vehicle is protected as follows:
z
The LED will flash as a visible theft deterrent.
z
Light impacts will trigger the Warning Zone signal. When
triggered, the siren will chirp for a few seconds.
z
Heavy impacts will trigger the system. The triggered
sequence is 30, 60, or 90 seconds of constant siren chirping
and flashing parking lights.
z
If a protected entry (door, hood, or trunk) is opened, the system will immediately trigger the siren and flash the parking
lights.
z
The optional immobilizer prevents the vehicle’s starter from
cranking.
disarming
To disarm the system, press . You will hear a chirp and the park-
ing lights will flash once. If the power locks are connected to the sys-
tem, the doors will unlock. If the siren chirps three times when disarm-
ing, refer to the Diagnostics section of this guide. This is called Tamper
Alert. If the siren is active when the system is disarmed you will hear
two chirps but the system is not disarmed. (Refer to the Remote Siren
Silencing section of this guide.) However, if the alarm completes the full
trigger cycle when disarmed you will hear three chirps.
nnoottee::
If any protected entry point (a door or a switch-protected trunk or
hood) is open, the system will not passively arm. Additionally, each
time a protected entry is triggered during the arming countdown, the
30-second countdown starts over.
8
disarming without a transmitter
This feature allows you to disarm the system without the transmitter
should it be lost, damaged, or disabled. In order to disarm without a
transmitter, you must have the vehicle’s ignition key, know where the
PlainView 2 Valet switch is located, and have the PIN code. Be sure to
check with the installer for the location of the PlainView 2 Valet switch
and instructions for entering the PIN code.
remote siren silencing
This system offers remote siren silencing. Remote siren silencing is a fea-
ture that makes it possible to silence and reset the system when it is trig-
gering without disarming the system. If the system is triggered and the
siren has been sounding, press on the transmitter to stop the trig-
ger and return the unit to the armed state. The system will not disarm,
but rather reset. This prevents you from disabling the system should you
wish to silence it without visually checking the vehicle. After resetting
the system, press again to disarm the system.
transmitter chirp muting
To temporarily turn off the arm or disarm chirps, use transmitter chirp
muting. Simply press and simultaneously on the trans-
mitter, and the confirmation chirp(s) will be eliminated for that one op-
eration only. The parking lights will flash to confirm the arm/disarm
command. If you want the arm/disarm chirps turned off permanently,
please refer to the User-Selectable Features section of this guide.
Loading...