This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
1.This device may not cause
harmful interference.
2. This device must accept any
interference received, including interference that may
cause undesired operation.
This quick guide is a brief introduction to getting your system started. This is a supplement, and not a substitu te for the
expanded English language User’s Manual in Adobe Acrobat format on the Device Drivers & Utilities + User’s Manual
disc supplied with your computer. This disc also contains the drivers and utilities necessary for the prop er operation of
the computer (Note: The company reserves the right to revise this publication or to change its contents without notice).
Some or all of the computer’s features may already have been setup. If they aren’t, or you are planning to re-configure
(or re-install) portions of the system, refer to the expanded User’s Manual. The Device Drivers & Utilities + User’sManual disc does not contain an operating system.
Regulatory and Safety Information
Please pay careful attention to the full regulatory notices and safety information contained in the expanded User’s Manual on the Device Drivers & Utilities + User’s Manual disc.
Intel and Intel Core are trademarks/registered trademarks of Intel Corporation.
English
1
Instructions for Care and Operation
The computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
• Don’t drop it, or expose it to shock. If the computer falls, the
case and the components could be damaged.
• Keep it dry, and don’t overheat it. Keep the computer and power
supply away from any kind of heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer
could be badly damaged.
English
• Avoid interference. Keep the compute r away from high capacity
transformers, electric motors, and other strong magnetic fields.
These can hinder proper performance and damage your data.
• Follow the proper working procedures for the computer. Shut
the computer down properly and don’t forget to save your work.
Remember to periodically save your data as data may be lost.
Servicing
Do not attempt to service the computer yourself. Doing so may
violate your warranty and expose you and the computer to
electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the power supply. Then refer
servicing to qualified service personnel under any of the fo llowing conditions:
• When the power cord or AC/DC adapter is damaged or frayed.
• If the computer has been exposed to any liquids.
• If the computer does not work normally when you follow the operating instructions.
• If the computer has been dropped or damaged (do not touch the
poisonous liquid if the LCD panel breaks).
• If there is an unusual odor, heat or smoke coming from your computer.
Safety Information
• Only use an AC/DC adapter approved for use with this computer.
• Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with
local codes for possible special disposal instructions.
• Do not continue to use a battery that has been dropped, or that
appears damaged (e.g. bent or twisted) in any way. Even if the
computer continues to work with a damaged battery in place, it
may cause circuit damage, which may possibly result in fire.
• Make sure that your computer is completely powered off before
putting it into a travel bag (or any such container).
• Before cleaning the computer, make sure it is disconnected from
any external power supplies, peripherals and cables (including
telephone lines). It is advisable to also remove your battery in
order to prevent accidentally turning the machine on.
• Use a soft clean cloth to clean the computer, but do not apply
cleaner directly to the computer. Do not use volatile (petroleum
distillates) or abrasive cleaners on any part of the computer.
• Do not try to repair a battery pack. Refer any battery pack repair or
replacement to your service representative or qualified service personnel.
• Note that in computer’s featuring a raised LCD electro-pl ated
logo, the logo is covered by a protective adhesive. Due to general
wear and tear, this adhesive may deter iorate over time and the
exposed logo may develop sharp edges. Be careful when handling
the computer in this case, and avoid touching the raised LCD electro-plated logo. Av oid placing any other items in the carrying bag
which may rub against the top of the computer during transport. If
any such wear and tear develops contact your service center.
2
Polymer Battery Precautions
Battery Disposal & Caution
The product that you have purchased contains a rechargeable
battery. The battery is recyclable. At the end of its useful life,
under various state and local laws, it may be illegal to dispose
of this battery into the municipal waste stream. Check with
your local solid waste officials for details in your area for recycling options or proper disposal.
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Discard used battery according to the manufacturer’s instructions.
Note the following information which is specific to polymer
batteries only, and where applicable, this overrides the general
battery precaution information.
• Polymer batteries may experience a slight expansion or swelling,
however this is part of the battery’s safety mechanism and is not a
cause for concern.
• Use proper handling procedures when using polymer batteries. Do
not use polymer batteries in high ambient temperature environments, and do not store unused batteries for extended periods.
English
3
System Startup
Shut Down
Note that you should always shut your computer down by
choosing Shut Down
from the Start Menu.
This will help prevent
hard disk or system
problems.
130 ゚
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and
English
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the
(do not exceed 130 degrees); use the other hand (as illustrated
in Figure 1) to support the base of the computer (Note:Never
lift the computer by the lid/LCD).
7. Press the power button to turn the computer “on”.
lid/LCD to a comfortable viewing angle
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
Figure 1 - Opening the Lid/LCD/Computer with AC/DC
Adapter Plugged-In
4
Model Differences
This notebook series includes four different model types that mainly differ as indicated in the table below. Note that
your model may appear slightly different from those pictured in this manual.
FeatureModel AModel BModel CModel D
English
Display Type
Video
3G Module
15.6" (39.62cm) HD/ HD+
FHD
Intel® Integrated GPU and
NVIDIA® GeForce GT 635M
Supports NVIDIA® Optimus Technology
SupportedNot SupportedSupportedNot Supported
17.3" (43.94cm) HD+
FHD
15.6" (39.62cm) HD/ HD+
FHD
Intel® Integrated GPU and
NVIDIA® GeForce GT 645M
Supports NVIDIA® Optimus Technology
17.3" (43.94cm) HD+ FHD
Table 1 - Model Differences
5
System Map: Front View with LCD Panel Open (Models A & C)
Note that the Touchpad and Buttons valid operational
area is that indicated within the red dotted lines above.
5
3
1
15.6” (39.62cm)
2
7
Figure 2
Front View with LCD Pan-
el Open (Models A & C )
1. PC Camera (Optional)
2. LCD
3. Power Button
4. LED Status Indicators
5. Keyboard
6. *Built-In Microphone
*Note that the microphone
location is dependent
upon your model design.
7. Touchpad & Buttons
4
6
7
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft is
usually prohibited. Make
sure the wireless modules are OFF if you are
using the computer
aboard aircraft.
Use the key combinations to toggle power to
the 3G/WLAN/Blue-tooth modules, and
check the LED indicator/
visual indicator to see if
the modules are powered on or not (see
Table 2 on page 8 and
Table 4 on page 9).
6
English
6
System Map: Front View with LCD Panel Open (Models B & D)
Note that the Touchpad and
Buttons valid operational area
is that indicated within the red
dotted lines above.
Figure 3
Front View with LCD
Panel Open (Models B
& D)
1. PC Camera
(Optional)
2. LCD
3. Power Button
4. LED Status Indicators
5. Keyboard
6. Built-In Microphone
7. Touchpad & Buttons
4
6
5
7
17.3” (43.94cm)
2
1
3
7
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft is
usually prohibited. Make
sure the wireless modules are OFF if you are
using the computer
aboard aircraft.
Use the key combinations to toggle power to
the 3G/WLAN/Blue-tooth modules, and
check the LED indicator/
visual indicator to see if
the modules are powered on or not (see
Table 2 on page 8 and
Table 4 on page 9).
English
7
LED Indicators
The LED indicators on the computer display helpful information about the current status of the computer.
IconColorDescription
IconColorDescription
English
GreenThe Wireless LAN Module is Powered On
OrangeThe Bluetooth Module is Powered On
GreenHard Disk Activity
GreenNumber Lock (Numeric Keypad) Activated
GreenCaps Lock Activated
GreenScroll Lock Activated
Table 2 - LED Status Indicators
OrangeThe AC/DC Adapter is Plugged In
GreenThe Computer is On
Blinking
Green
OrangeThe Battery is Charging
GreenThe Battery is Fully Charged
Blinking
Orange
Table 3 - LED Power Indicators
The Computer is in Sleep Mode
The Battery Has Reached Critically
Low Power Status
8
Keyboard & Function Keys
Function Keys
NumLk &
ScrLk
Numeric
Keypad
Fn Key
Figure 4 - Keyboard
The keyboard has a numeric keypad for easy numeric data
input. Pressing the Fn + NumLk keys turns on/off the numeric keypad. It also features function keys to allow you to
change operational features instantly.
The function keys (F1 - F12 etc.) will act as hot keys when
pressed while the Fn key is held down. In addition to the basic function key combinations, visual indicators are available when the hot key driver is installed.
Fn + ~Play/Pause (in Audio/Video Programs)Fn + F8/F9
Brightness Decrease/
Increase
English
Fn +
(Models A & C
Only)
Fn + F1Touchpad ToggleFn + F11
Fn + F2
Fn + F3Mute ToggleFn + NumLkNumber Lock Toggle
Fn + F4Sleep ToggleFn + ScrLkScroll Lock Toggle
Fn + F5/F6
Fn + F7Display ToggleFn + EscControl Center Toggle (see page 10)
3G Module Power Tog-
(Press a key to or use Touchpad to turn on)
Volume Decrease/
Increase
gle
Turn LCD Backlight Off
Table 4 - Function Keys & Visual Indicators
Fn + F10
Fn + F12
Caps LockCaps Lock Toggle
PC Camera Power
Toggle
WLAN Module Power
Toggle
Bluetooth Module
Power Toggle
9
Control Center
Wireless & Bluetooth
Modules are Off
Press the Fn + Esc key combination, or double-click the icon in the notification area of the taskbarto toggle the
Control Center on/off. The Control Center gives quick access to frequently used controls,and enables you to quickly
turn modules on/off.
English
Figure 5 - Control Center
Click on any button to turn any of the modules (e.g. TouchPad, Camera) on/off. Click on Power Conservation to switch
between Performance, Balanced or Energy Star modes. Click on the buttons (or just click and hold the mouse button)
to adjust the slider for Brightness/Volume. Click on Display Switch/Time Zone/ Desktop Background to bring up
the appropriate Windows control panel. Click on the Sleep button to put the computer into Hibernate or Sleep modes.
10
Power Modes
You can set a Power Mode by clicking the appropriate icon at the top of the Control Center. Each power mode will
affect the power status of modules (e.g. WLAN, 3G or Camera), screen brightness, Touchpad power and Silent Mode.
You can click a Control Center icon to set an overall power mode and then click individual icons in the Control Cen-ter to power on/off any modules etc.
Table 5 illustrates the basic settings for each power mode. If you choose User Defined the settings will correspond to
your selected system settings.
English
Modes
Icon
Power PlanPower SaverBalancedPower SaverPower Saver
Power Conservation ModeEnergy StarBIOS DefaultEnergy StarEnergy StarPerformance
Brightness144210042100
WLANOFFOFFONONON
3GOFFOFFOFFOFFOFF
PC CameraOFFOFFOFFONON
TouchpadONONONONON
Power
Saving
FlightEntertainmentQuietPerformanceUser Defined
High Perfor-
mance
Table 5 - Power Modes
User Defined
11
Power Status
The Power Status icon will show whether you are currently powered by the battery, or by the AC/DC adapter plugged
in to a working power outlet. The power status bar will show the current battery charge state.
Brightness
The Brightness icon will show the current screen brightness level. You can use the slider to adjust the screen brightness
or the Fn + F8/F9 key combinations, or use the Fn + F2 key combination to turn off the LED backlight (press any key
to turn it on again). Note that screen brightness is also effected by the Power Mode selected.
English
Volume
The Volume icon will show the current volume level. You can use the slider to adjust the volume or the Fn + F5/F6
key combinations, or use the Fn + F3 key combination to mute the volume.
Power Conservation
This system supports Energy Star power management features that place computers (CPU, hard drive, etc.) into a lowpower sleep mode after a designated period of inactivity. Click either the Performance, Balanced or Energy Star but-
ton.
Sleep
Click the Sleep button to bring up the Hibernate or Sleep buttons, and click either button to have the computer
enter the appropriate power-saving mode.
12
Display Switch
Click the Display Switch button to access the menu (or use the + P key combination) and select the appropriate
display mode.
Time Zone
Clicking the Time Zone button will access the Date and Time Windows control panel.
Desktop Background
Clicking the Desktop Background button will allow you to change the desktop background picture.
Touchpad/PC Camera/Wireless LAN Module /Bluetooth/3G Module
Click any of these buttons to toggle the Touchpad or module’s power status. A crossed out icon will appear over the top
left of the icon when it is off
Power Mode selected.
. Note that the power status of a module, and Touchpad power, is also effected by the
Caps Lock/Scroll Lock/ Number Lock
Click the button to toggle the appropriate lock mode.
English
13
System Map: Front, Left, Right, Rear & Bottom Views (Models A
1
Front
16
7
Bottom
18
19
7
19
Figure 6
Front, Left, Right, Rear & Bottom Views (Models A & C)
1. LED Power Indicators
2. DC-In Jack
3. External Monitor Port
4. RJ-45 LAN Jack
5. HDMI-Out Port
6. USB 3.0 Ports
7. Vent
8. Multi-in-1 Card Reader
9. e-SATA Port
10. Microphone-In Jack
11. Headphone-Out Jack
12. USB 2.0 Port
13. Opt ic a l De v ice Driv e Ba y
14. Emergency Eject Hole
15. Security Lock Slot
16. Battery
17. Component Bay Cover
18. Har d Di sk Ba y Cov er
19. Speakers
2
7
8
4
6
3
Left
Right
5
Rear
10
13
11
14
12
9
16
6
15
USB 3.0 Port
The USB 3.0 ports
are colored
blue. USB 3.0 will
transfer data much
faster than USB
2.0, and is backwards-compatible
with USB 2.0.
6
17
7
7
Disc Emergency Eject
If you need to manually
eject a disc (e.g. due to
an unexpected power interruption) you may push
the end of a straightened
paper clip into the emergency eject hole. Do not
use a sharpened pencil
or similar object that may
break and become
lodged in the hole.
& C)
English
14
System Map: Front, Left, Right, Rear & Bottom Views (Models B
blue. USB 3.0 will
transfer data much
faster than USB
2.0, and is backwards-compatible
with USB 2.0.
6
CPU
The CPU is not a user serviceable part. Accessing the
CPU in any way may violate
your warranty.
Overheating
To prevent your computer
from overheating make sure
nothing blocks any vent
while the computer is in use.
& D)
English
15
Video Features
1
2
2
1
Figure 8 - Display Control Panel
The system features both an Intel’s Integrated GPU (for
power-saving) and an NVIDIA’s discrete GPU (for performance). You can switch display devices, and configure
display options as long as the video drivers are installed.
NVIDIA® Optimus™ Technology
English
NVIDIA® Optimus™ technology is a seamless technology designed to get best performance from the graphics
system while allowing longer battery life, without having
to manually change settings. The computer will automatically and seemlessly switch between the integrated UMA
(Unified Memory Architecture) GPU (iGPU) and the discrete GPU (dGPU) when required by the applications in
use.
To access Display control panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Display (icon) - in the Appearances and Personalization category.
3. Click Adjust Screen Resolution/Ad ju st resolution.
OR
4. Alternatively you can right-click the desktop and select
Screen resolution.
5. Use the dropbox to select the screen resolution .
6. Click Advancedsettings .
16
To access the Intel® Graphics and Media Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Intel(R) Graphics and Media in the icon view.
OR
3. Right-click the desktop and select Graphics Properties from
the menu.
OR
4. Click the icon in the notification area of the taskbar and
select Graphics Properties from the menu.
5. Choose the application mode (Basic, Advanced or Wizard)
and click OK.
To access the NVIDIA Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click NVIDIA Co ntrol Panel (icon) - in the Appearances and Personalization category.
OR
3. Right-click the desktop and select NVIDIA Control Panel
from the menu.
Display Devices & Options
Besides the built-in LCD you can also use an external
monitor/flat panel display/TV (TV through HDMI-Out
port only), connected to the external monitor port or to the
HDMI-Out port (High-Definition Multimedia Interface)
as your display device.
English
17
Audio Features
Sound Volume Adjustment
The sound volume level is set
using the volume control within
Windows (and the volume
function keys on the computer).
Click the Speaker icon in the
taskbar to check the setting.
Menu
Figure 9
THX TruStu-
dio Pro HDMI
Display Warn-
ing
You can configure the audio options on your computer
from the Sound control panel in Windows, or from theRealtek HD Audio Manager / icon in the taskbar/
control panel (right-click the taskbar icon to bring up
an audio menu). The volume may also be adjusted by
means of the Fn + F5/F6 key combination/the volume
control.
English
THX TruStudio Pro Audio
Install the THX TruStudio AP to allow you to configure
the audio settings to your requirements for the best performance in games, music and movies.
THX TruStudio Pro Activation
On the first run of THX TruStudio Pro you will need to activate the application.
1. To activate the application you will need to be connected to
the internet.
2. Double-click the THX Activate icon on the desktop and
click the Activate button.
3. The program will connect to th e internet to verify the activation
key.
4. Click Finish to complete the application activation.
5. Restart the computer.
THX Tru Studio Pro & HDMI
1. When you connect an HDMI display to the HDMI-Out port, the
THX TruStudio Pro controls will be disabled.
2. A warning box will pop-up and will prompt “Do you want to select another audio device now?”.
3. Click No to continue using the HDMI audio output from your
external display (do not attempt to select another audio device
when connected to the external HDMI display).
18
Intel® Wireless Display Application
The Intel® Wireless Display Application (requires In-
tel® Centrino WLAN/Combo module), in conjunction
with a compatible video adapter (purchased separately),
allows you to display the contents of the notebook display
on another display (e.g. HDTV) without the need to have
cables stretching across a room. You can then play games,
browse the internet, display videos or photo slide shows
on your TV/external display without using HDMI or A/V
cables.
Before configuring the Intel® WiDi application you will
need to set up your compatible adapter with your dis-
play/speakers. Connect the adapter using an HDMI or A/
V cable and turn on the display (or in the case of speakers
connect them to the wireless speaker adapter with the cables provided with the adapter), and then set the display to
the appropriate input channel (see the documentation supplied with your compatible adapter for full details).
Intel
® WiDi also incorporates Intel® Wireless Music
which allows you to wirelessly stream audio from your
computer to speakers connected to a compatible wireless
speaker adapter (purchased separately).
Intel® WiDi Application Installation
1. Insert the Device Drivers & Utilities + User’s Manual disc into
the CD/DVD drive.
2. Click Option Drivers (button).
3. Click 3.Install WiDi AP > Yes.
4. Click Next.
5. Click the button to accept the license and click Next.
6. Click Finish.
Intel® Wireless Music Driver Installation
If you wish to use your system to stream wireless audio to
speakers connected to a compatible wireless speaker
adapter you will need to install the Intel(R) Wireless Mu-sic Driver.
1. Insert the Device Drivers & Utilities + User’s Manual disc into
the CD/DVD drive.
2. Click Browse and browse to the driver location (X: denotes
your DVD drive):
• X:\Options\02WLAN\Intel\WMusic\autorun.exe
3. Click Next.
4. Click the button to accept the license and click Next.
5. Click Finish.
6. Follow the procedure overleaf to setup WiDi or Wireless Music.
English
19
Intel® WiDi Application Configuration
Compatible Adapters
For a list of compatible display and audio adapters check
the Intel website, or your service center.
1. Click Start > All Programs > Intel Corporation > Intel(R) Wireless Display > Intel(R) Wireless Display, or double click
the icon on the desktop.
2. Click I agree to the terms of this license (button).
3. The application will scan for any connected compatible
adapters (or you can click the Scan for available adapters
button to enable Intel My WiFi Technology).
4. Click to select any detected adapters, and click Connect.
English
5. The system will then prompt you to enter the 4-digit security
code which will be displayed on the external TV Screen (or
press the connect button on the wireless speaker adapter).
6. Enter the code for the video adapter and click Continue.
7. Y ou will then be pro mpted to enter a name for the video adapter
and click Continue.
8. Click Finished to complete the setup.
20
3G Module
1
1
USIM Card
Orientation
Note that the USIM
card’s readable side
(with the gold-colored
contacts) should face
upwards as illustrated.
(Models A & C Only)
If you have included an optional 3G module in your purchase option, follow the instructions below to install the USIM
card (which will be provided by your service provider), and then run the appropriate application supplied with your
module.
USIM Card Insertion
1. Turn off the computer, and turn it over and remove the battery (slide the latches in the direction indicated below and slide the
battery out).
2. Insert the USIM card as illustrated below until it clicks into position, and replace the battery.
English
Figure 10 - Remove the battery
21
Driver Installation General
Guidelines
As a general guide follow the
default on-screen instructions for each driver (e.g.
Next > Next > Finish) unless
you are an advanced user. In
many cases a restart is required to install the driver.
Make sure any modules (e.g.
PC Camera, WLAN or 3G)
are ON before installing the
appropriate driver.
Windows Update
After installing all the drivers
make sure you enable Win-dows Update in order to get
all the latest security updates
etc. (all updates will include
the latest hotfixes from Mi-
crosoft).
Driver Installation & Power
When installing drivers make sure
your computer is powered by the
AC/DC adapter connected to a
working power source. Some drivers draw a significant amount of
power during the installation procedure, and if the remaining battery
capacity is not adequate this may
cause the system to shut down and
cause system problems (note that
there is no safety issue involved
here, and the battery will be rechargeable within 1 minute).
English
22
Driver Installation
The Device Drivers & Utilities + User’s Manual disc contains the drivers and utilities
necessary for the proper operation of the computer. This setup will probably have already been done for you. If this is not the case, insert the disc and click Install Drivers
(button), or Option Drivers (button) to access the Optional driver menu. Install the
drivers in the order indicated in Figure 11. Click to select the drivers you wish to
install (you should note down the drivers as you install them). Note: If you need to
reinstall any driver, you should uninstall the driver first
If the Found New Hardware wizard appears during the installation procedure, click
Cancel to close the window, and follow the installation procedure as directed.
Figure 11 - Install Drivers
.
Troubleshooting
ProblemPossible Cause - Solution
The Wireless LAN/
Bluetooth/3G modules
cannot be detected.
The Bluetooth module is off
after resuming from Sleep.
A file cannot be copied to/
from a connected Bluetooth
device.
The captured video files from
the PC Camera are taking up
too much disk space.
The modules are off. Check the LED indicator and/or function key indicator to see if the WLAN/
Bluetooth/3G module is on or off (see Table 2 on page 8 and Table 4 on page 9). If the LED
indicator is off, then press the Fn + F11 (WLAN), Fn + F12 (Bluetooth) or Fn + (3G) in order to
enable the modules (see Table 4 on page 9).
The Bluetooth module’s default state will be off after resuming from the Sleep power-saving state.
Use the key combination (Fn + F12) to power on the Bluetooth module after the computer resumes
from Sleep.
Transferring data between the computer and a Bluetooth enabled device is supported in one
direction only (simultaneous data transfer is not supported). If you are copying a file from your
computer to a Bluetooth enabled device, you will not be able to copy a file from the Bluetooth
enabled device to your computer until the file transfer process from the computer has been
completed.
Note that capturing high resolution video files requires a substantial amount of disk space for each
file.
Note that the Windows system requires a minimum of 15GB of free space on the C: drive system
partition. It is recommended that you save the capture video fil e to a loca tion ot her than the C:drive,
limit the file size of the captured video or reduce video resolution (Options > Video Capture Pin...
> Output Size).
English
23
Specifications
Latest Specification Information
The specifications listed in this here
are correct at the time of going to
press. Certain items (particularly processor types/speeds) may be
changed, delayed or updated due to
the manufacturer's release schedule. Check with your service center
for details.
Slot 1 for WLAN Module or Combo WLAN
and Bluetooth Module
(Factory Option) Slot 2 for 3G Module
Models B & D:
Slot 1 for WLAN Module or Combo WLAN
and Bluetooth Module
Interface
One USB 2.0 Port
Two USB 3.0 Ports
One eSATA Port
One HDMI-Out Port
One External Monitor Port
One Headphone-Out Jack
One Microphone-In Jack
One RJ-45 LAN Jack
One DC-in Jack
Environmental Spec
Temperature
Operating: 5
Non-Operating: -20°C - 60°C
Relative Humidity
Operating: 20% - 80%
Non-Operating: 10% - 90%
°C - 35°C
Power
Full Range AC/DC Adapter
AC Input: 100 - 240V, 50 - 60Hz
DC Output: 19V, 4.74A (90W)
6 Cell Smart Lithium-Ion Battery Pack,
48.84WH
(Factory Option) 6 Cell Smart Lithium-Ion
Battery Pack, 62.16WH
Dimensions & Weight
Models A & C:
374mm (w) * 250mm (d) * 14.3 - 37.2mm
(h)
2.6kg with 48.84WH Battery & ODD
or
374mm (w) * 250mm (d) * 20 - 37.2mm (h)
2.6kg with 48.84WH Battery & ODD
Models B & D:
413mm (w) * 270mm (d) * 14 - 40.5mm (h)
3kg (with 48.84WH Battery and ODD)
26
Loading...
+ 104 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.