This Concise User’s Guide introduces the main features
of your computer. The English version of this guide begins on page 1. The expanded User’s Manual is on the
Device Drivers & Utilities + User’s Manual disc.
Einführung (Deutsch)
Dieses Ausführliche Benutzerhandbuch führt Sie in die
Hauptfunktionen des Computers ein. Die deutsche Version des Handbuchs beginnt auf Seite 19. Das erweiterte
Benutzerhandbuch finden Sie auf der Disc für die Gerätetreiber und Hilfsprogramme (Disc Device Drivers &Utilities + User's Manual).
Présentation (Français)
Ce Guide Utilisateur Concis présente les fonctionnalités
principales de votre ordinateur. La version française de
ce guide commence à la page 37. Le Manuel de l'Utilisa-
teur étendu se trouve sur le disque de Pilotes & Utilitaires + Manuel de l'Utilisateur (disque Device Drivers
& Utilities + User's Manual).
Introducción (Español)
Esta Guía del Usuario Concisa le presenta las características principales de su ordenador. La versión española de
esta guía comienza en la página 55. El Manual del usua-
rio completo se encuentra en el disco de Controladores
del dispositivo y Utilidades + Manual del usuario (disco
Device Drivers & Utilities + User's Manual).
Introduzione (Italiano)
La presente Guida Rapida per l'Utente introduce le caratteristiche principali del computer. La versione italiana di
questa guida inizia da pagina 73. Il Manuale utente completo si trova nel disco contenente driver e utilità + Ma-
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions:
1.This device may not cause
harmful interference.
2. This device must accept any
interference received, including interference that may
cause undesired operation.
This quick guide is a brief introduction to getting your system started. This is a supplement, and not a substitu te for the
expanded English language User’s Manual in Adobe Acrobat format on the Device Drivers & Utilities + User’s Manual
disc supplied with your computer. This disc also contains the drivers and utilities necessary for the prop er operation of
the computer (Note: The company reserves the right to revise this publication or to change its contents without notice).
Some or all of the computer’s features may already have been setup. If they aren’t, or you are planning to re-configure
(or re-install) portions of the system, refer to the expanded User’s Manual. The Device Drivers & Utilities + User’sManual disc does not contain an operating system.
Regulatory and Safety Information
Please pay careful attention to the full regulatory notices and safety information contained in the expanded User’s Manual on the Device Drivers & Utilities + User’s Manual disc.
Intel and Intel Core are trademarks/registered trademarks of Intel Corporation.
English
1
Instructions for Care and Operation
Battery Disposal & Caution
The product that you have purchased contains a recharg eable
battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of
this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the
manufacturer. Discard used battery according to the manufacturer’s instructions.
The computer is quite rugged, but it can be damaged. To prevent
this, follow these suggestions:
• Don’t drop it, or expose it to shock. If the computer falls, the case and the
components could be damaged.
• Keep it dry, and don’t overheat it. Keep the computer and power supply
away from any kind of heating element. This is an electrical appliance. If
water or any other liquid gets into it, the computer could be badly damaged.
• Avoid interference . Keep the computer away from high capacity trans-
English
formers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data.
• Follow the proper working procedures for the computer. Shut the com-
puter down properly and don’t forg et to save yo ur work. Remember to
periodically save your data as data may be lost.
Servicing
Do not attempt to service the computer yourself. Doing so may v iolate your warranty and expose you and the computer to electric
shock. Refer all servicing to authorized service personnel. U nplug
the computer from the power supply. Then refer servicing to qualified service personnel under any of the following conditions:
• When the power cord or AC/DC adapter is damaged or frayed.
• If the computer has been exposed to any liquids.
• If the computer does not work normally when you follow the operating
instructions.
• If the computer has been dropped or damaged (do not touch the poisonous
liquid if the LCD panel breaks).
• If there is an unusual odor, heat or smoke coming from your computer.
Safety Information
• Only use an AC/DC adapter approved for use with this computer.
• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
• Do not continue to use a battery that has been dropped, or that appears
damaged (e.g. bent or twisted) in any way. Even if the computer continues
2
to work with a damaged battery in place, it may cause circuit damage,
which may possibly result in fire.
• Make sure that your computer is completely powered off before putting it
into a travel bag (or any such container).
• Before cleaning the computer, make sure it is disconnected from any external power supplies, peripherals and cables (including telephone lines). It is
advisable to also remove your battery in order to prevent accidentally turning the machine on.
• Use a soft clean cloth to clean the computer, but do not apply cleaner
directly to the computer. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel.
Polymer Battery Precautions
Note the following information which is specific to polymer ba tteries only, and where applicable, this overrides the general battery precaution information.
• Polymer batteries may experience a slight expansion or swelling, however
this is part of the battery’s safety mechanism and is not a cause for concern.
• Use proper handling procedures when using polymer batteries. Do not use
polymer batteries in high ambient temperature environments, and do not
store unused batteries for extended periods.
System Startup
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
Shut Down
Note that you should always shut your computer
down by choosing ShutDown from the Start
Menu.
This will help prevent hard
disk or system problems.
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the
angle
(do not exceed 130 degrees); use the other hand (as
illustrated in Figure 1) to support the base of the computer
(Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer “on”.
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
lid/LCD to a comfortable viewing
English
Models Differences
This notebook series includes different models that vary
slightly in design style, color and general appearance. Note
that though your computer may look slightly different
from that pictured throughout this documentation, all
ports, jacks, indicators, specifications and general functions are the same for all the design styles.
3
System Map: Front View with LCD Panel Open
2
1
9
8
6
7
3
4
5
3
10
Model A
15.6” (39.62cm)
Model B
17.3” (43.94cm)
Note that the Touchpad and Buttons valid
operational area is that indicated within
the red dotted lines above.
9
8
6
7
4
5
3
2
1
9
Figure 2
Front View with LCD Panel
Open
1. PC Camera (Optional)
2. LCD
3. Power Button
4. GPU Button
5. LED Indicators
6. Hot Key Buttons
7. Keyboard
8. Built-In Microphone
9. Touchpad & Buttons
10. Fingerprint Reader
(Optional for Model A Only)
Wireless Device
Operation Aboard Aircraft
The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the wireless modules are OFF if you are using the
computer aboard aircraft.
Use the key combinations to toggle power to the 3.75G/HSPA/WLAN/Blue-
tooth modules, and check the LED indicator/visual indicator to see if the mod-
ules are powered on or not (see Table 4 on page 7).
English
4
LED Indicators
Model A
Model B
The LED indicators on the computer display helpful information about the current status of the computer.
IconColorDescription
IconColorDescription
OrangeDC Power is Plugged In
GreenThe Computer is On
Blinking GreenThe Computer is in Sleep Mode
OrangeThe Battery is Charging
GreenThe Battery is Fully Charged
Blinking Orange
GreenNumber Lock Activated
GreenCaps Lock Activated
GreenScroll Lock Activated
Table 1 - Front Left LED Indicators
The Battery Has Reached Criti-
cally Low Power Status
English
GreenUMA Mode Activated
OrangeOptimus Mode Activated
GreenIntel Integrated GPU (iGPU) Activated
OrangeNVIDIA Discrete GPU (dGPU) Activated
GreenThe Wireless LAN Module is Powered On
OrangeThe Bluetooth Module is On
WhiteHard Disk Activity
Table 2 - Top Case LED Indicators
5
Hot Key Buttons & Keyboard
Model A
Model B
Function Keys
NumLk &
ScrLk
Numeric
Keypad
Fn Key
3.75G/HSPA
Module Power
Toggle
Special Characters
Some software applications allow the number-keys to be
used with Alt to produce special characters. These special
characters can only be produced by using the numeric
keypad. Regular number keys (in the upper row of the keyboard) will not work. Make sure that the numeric keypad is
on.
Press the Hot Key buttons on the computer to toggle the
appropriate function on/off.
IconDescription
English
WLAN Module Power Toggle
Mute Toggle
PC Camera Power Toggle
Table 3 - Hot Key Buttons
6
The keyboard has a numeric keypad for easy numeric data
input. Pressing Fn + NumLk turns on/off the numeric
keypad. It also features function keys to allow you to
change operational features instantly.
Figure 3 - Keyboard
Function Keys
The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the
basic function key combinations, visual indicators are available when the hot key driver is installed.
The USB 3.0 port is denoted
by its blue color; USB 2.0
ports are colored black. USB
3.0 will transfer data much
faster than USB 2.0, and is
backwards-compatible with
USB 2.0.
Right
Rear
Disc Emergency Eject
If you need to manually eject a disc (e.g. due to
an unexpected power interruption) you may
push the end of a straightened paper clip into the
emergency eject hole. Do not use a sharpened
pencil or similar object that may break and become lodged in the hole.
English
System Map: Front, Left, Right & Rear Views
8
System Map: Bottom View
Figure 5
Bottom View
1. Battery
2. Component Bay Cover
3. Vent
4. Hard Disk Bay Cover
5. Speakers
CPU
The CPU is not a user serviceable part. Accessing the
CPU in any way may violate
your warranty.
Overheating
To prevent your computer
from overheating make sure
nothing blocks any vent while
the computer is in use.
2
3
1
4
3
3
5
5
2
3
1
4
3
5
Model A
Model B
3
3
3
3
5
English
9
Video Features
1
2
2
1
Figure 6 - Display Control Panel
The system features both an Intel’s Integrated GPU (for
power-saving) and an NVIDIA’s discrete GPU (for performance). You can switch display devices, and configure
display options as long as the video drivers are installed.
To access Display control panel:
1. Click Start, and click Control Panel (or point to Settings and
English
click Control Panel).
2. Click Display (icon) - in the Appearances and Personalization category.
4. Alternatively you can right-click the desktop and select
Screen resolution.
5. Use the dropbox to select the screen resolution .
6. Click Advancedsettings .
To access the Intel® Graphics and Media Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Intel(R) Graphics and Media in the icon view.
OR
3. Right-click the desktop and select Graphics Properties from
4. Choose the application mode (Basic, Advanced or Wizard).
the menu.
To access the NVIDIA Control Panel:
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click NVIDIA Control Panel (icon) - in the Appearances and Personalization category.
OR
3. Right-click the desktop and select NVIDIA Control Panel
from the menu.
Display Devices & Options
Besides the built-in LCD you can also use an external
monitor/flat panel display/TV (TV through HDMI-Out
port only), connected to the external monitor port or to the
HDMI-Out port (High-Definition Multimedia Interface)
as your display device.
10
NVIDIA® Optimus™ Technology
Nvidia® Optimus™ technology is a seamless technology
designed to get best performance from the graphics system while allowing longer battery life, without having to
manually change settings. Thus when an application is run
that requires extra performance or quality, then the system
will run the discrete GPU (dGPU); when the system does
not require such enhanced performance it will let the integrated (iGPU) handle it.
GPU Button
This computer also features a button that allows the
user to switch between Optimus Mode and UMA Mode
(Unified Memory Architecture). UMA Mode will use
only the integrated GPU; Optimus Mode will allow the
system to automatically determine whether the dGPU oriGPU is used. Thus the user can completely control how
the graphics system operates. Press the GPU button ,
and the button color will indicate the current mode.
IconColorDescription
UMA Mode Activated
Green
Orange
Table 5 - GPU Button Modes
The system will use the Intel inte-
grated GPU (iGPU) only
Optimus Mode Activated
Optimus technology will determine
when to use the Intel integrated GPU
(iGPU) or NVIDIA discrete GPU
(dGPU) automatically
The GPU LED indicators will display which GPU is
currently in use.
IconColorDescription
Green
Orange
Table 6 - GPU LED Indicators
Intel Integrated GPU (iGPU) Acti-
vated
NVIDIA Discrete GPU (dGPU) Acti-
vated
English
11
Audio Features
Sound Volume Adjustment
The sound volume level is set
using the volume control within
Windows (and the volume
function keys on the computer).
Click the Speaker icon in the
taskbar to check the setting.
Menu
Figure 7
THX TruStu-
dio Pro HDMI
Display Warn-
ing
You can configure the audio options on your computer
from the Sound control panel in Windows, or from the
Realtek HD Audio Manager
control panel (right-click the taskbar icon to bring up
an audio menu). The volume may also be adjusted by
means of the Fn + F5/F6 key combination/the volume
control.
English
/ icon in the taskbar/
THX TruStudio Pro Audio
Install the THX TruStudio AP to allow you to configure
the audio settings to your requirements for the best performance in games, music and movies.
THX TruStudio Pro Activation
On the first run of THX TruStudio Pro you will need to activate the application.
1. To activate the application you will need to be connected to
the internet.
2. Double-click the THX Activate icon on the desktop and
click the Activate button.
3. The program will connect to the internet t o verify the acti vation
key.
4. Click Finish to complete the application activation.
5. Restart the computer.
THX Tru Studio Pro & HDMI
1. When you connect an HDMI display to the HDMI-Out port, the
THX TruStudio Pro controls will be disabled.
2. A warning box will pop-up and will prompt “Do you want to select another audio device now?”.
3. Click No to continue using the HDMI audio output from your
external display (do not attempt to select another audio device
when connected to the external HDMI display).
12
3.75G/HSPA Module
1
1
USIM Card Orientation
Note that the USIM card’s readable side (with the gold-colored contacts) should face upwards as illustrated.
(Optional for Model A Computers Only)
If you have included an optional 3.75G/HSPA module in
your purchase option, follow the instructions below to install the USIM card (which will be provided by your service provider), and then run the appropriate application
supplied with your module.
USIM Card Insertion
1. Turn off the computer, and turn it over and remove the battery (slide the latches in the direction indicated below and
slide the battery out).
2. Insert the USIM card as illustrated below until it clicks into
position, and replace the battery.
English
Figure 9 - Insert the USIM Card
Figure 8 - Remove the battery
13
Driver Installation
Driver Installation General
Guidelines
As a general guide follow the
default on-screen instructions for each driver (e.g.
Next > Next > Finish) unless
you are an advanced user. In
many cases a restart is required to install the driver.
Make sure any modules (e.g.
PC Camera, WLAN or 3.75G/
HSPA) are ON before install-
ing the appropriate driver.
Windows Update
After installing all the drivers
make sure you enable Win-dows Update in order to get
all the latest security updates
etc. (all updates will include
the latest hotfixes from Mi-
crosoft).
The Device Drivers & Utilities + User’s Manual disc contains the drivers and utilities
necessary for the proper operation of the computer. This setup will probably have already been done for you. If this is not the case, insert the disc and click Install Drivers
(button), or Option Drivers (button) to access the Optional driver menu. Install the
drivers in the order indicated in Figure 10. Click to select the drivers you wish to install (you should note down the drivers as you install them). Note: If you need to reinstall any driver, you should uninstall the driver first.
English
Manual Driver Installation
Click the Browse CD/DVD button in the Drivers Installer application and browse to
the executable file in the appropriate driver folder.
Found New Hardware
If a
Cancel, and follow the installation procedure as directed.
wizard appears
during the installation procedure, click
14
Figure 10 - Install Drivers
Troubleshooting
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft
is usually prohibited.
Make sure the wireless modules are OFF
if you are using the
computer aboard aircraft.
Use the key combinations to toggle power to
the 3.75G/HSPA/WLAN/Bluetooth modules, and check the visual indicator to see if
the modules are powered on or not (see Ta-
ble 4 on page 7).
ProblemPossible Cause - Solution
The PC Camera/
Wireless LAN/
Bluetooth modules
cannot be detected.
The 3.75G/HSPA module cannot be
detected.
The captured video
files from the PC Camera are taking up
too much disk space.
The modules are off. Check the LED indicator und/or function key
indicator to see if the PC Camera/WLAN/Bluetooth module is on or off
(see Table 2 on page 5 and Table 4 on page 7). Use the key
combination Fn + F10/the Hot Key button (PC Camera), the key
combination Fn + F11
combination Fn + F12 (Bluetooth) to toggle power to the module (see
Table 4 on page 7).
The module is off. Check the function key indicator
the 3.75G/HSPA module is on or off. Use the Fn + (3.75G/HSPA) key
combination to toggle power to the 3.75G/HSPA module (see Table 4 on
page 7).
Note that capturing high resolution video files requires a substantial
amount of disk space for each file.
Note that the Windows system requires a minimum of 15GB of free
space on the C: drive system partition. It is recommended that you save
the capture video file to a location other than the C:drive, limit the file size
of the captured video or reduce video resolution (Options > VideoCapture Pin... > Output Size).
/the Hot Key button (WLAN) or the key
/ to see if
English
15
Specifications
Latest Specification Informat ion
The specifications listed in this section
are correct at the time of going to press.
Certain items (particularly processor
types/speeds) may be changed, delayed or updated due to the manufacturer's release schedule. Check with
your service center for details.
High Definition Audio Compliant Interface
THX TruStudio Pro
2 * Built-In Speakers
Built-In Microphone
Storage
(Factory Option) One Changeable
12.7mm(h) Optical Device Type Drive (Super
Multi Drive Module or Blu-Ray Combo Drive
Module)
One Changeable 2.5" 9.5 mm (h) SATA
(Serial) HDD
Interface
Two USB 2.0 Ports
Two USB 3.0 Ports
One eSATA Port
One HDMI-Out Port
One Headphone-Out Jack
One Microphone-In Jack
One S/PDIF Out Jack
One RJ-45 LAN Jack
One External Monitor Port
One DC-in Jack
Communication
Built-In Gigabit Ethernet LAN
(Factory Option) 1.3M Pixel USB PC Cam-
era Module
(Factory Option) 3.75G/HSPA Mini-Card
Module (Model A Only)
WLAN/ Bluetooth Half Mini-Card
Modules:
(Factory Option) Intel® Centrino®
Advanced-N 6230 Wireless LAN (802.11a/g/n) + Bluetooth 3.0
(Factory Option) Intel® Centrino® WirelessN 1030 Wireless LAN (802.11b/g/n) + Blue-
tooth 3.0
(Factory Option) Intel® Centrino® UltimateN 6300 Wireless LAN (802.11a/g/n)
(Factory Option) Third-Party Wireless LAN
(802.11b/g/n) + Bluetooth 3.0
Diese Kurzanleitung soll einen Überblick über die Schritte geben, die dazu notwendig s ind, das System zu starten. Dieses ist
nur eine Ergänzung und kein Ersatz für das erweiterte englischsprachige Benutzerhandbuch, das auf der mitgelieferten DiscDevice Drivers & Utilities + User's Manual im Adobe-Acrobat-Format vorliegt. Diese Disc enthält auch die Treiber und
Utility-Programme, die für einen einwandfreien Betrieb des Computers notwendig sind (Hinweis: Das Unternehmen behält
sich das Recht vor, diese Publikation ohne Vorankündigung zu überarbeiten und den Inhalt zu verändern).
Einige oder alle Funktionen des Computers sind bereits eingerichtet worden. Falls das nicht der Fall ist oder wenn Sie einzelne Teile des Systems neu konfigurieren (oder neu installieren) möchten, finden Sie eine Anleitung im erweiterten Benut-zerhandbuch. Die Disc Device Drivers & Utilities + User's Manual enthält nicht das Betriebssystem.
Einhaltung gesetzlicher Vorschriften und Sicherheitshinweise
Beachten Sie sorgfältig die Hinweise zu gesetzlichen Vorschriften und zu Sicherheitshinweisen im erweiterten Benutzerhandbuch auf der Disc Device Drivers & Utilities + User's Manual.
Intel und Intel Core sind warenzeichen/e inget ragenes ware nzeichen der Intel Corporation.
Deutsch
19
Hinweise zu Pflege und Betrieb
Entsorgen der Akkus/ Batterien & Achtung
Das von Ihnen gekaufte Produkt enthält einen aufladbaren Akku. Dier
Akku ist wiederverwertbar. Nach verschieden en nationalen und regionalen Getzgebungen kann es verboten in, einen nicht mehr
gebrauchsfähigen Akku in den normalen Hausmüll zu werfen. Informieren Sie sich bei Ihrem regionalen Entsorgungs unternehmen über
Recycling-Möglichkeiten oder korrekte Entsorgung.
Wenn ein falscher Akku eingesetzt wird, besteht Explosionsgefahr.
Tauschen Sie den Akku nur durch den gleichen oder einen baugleichen
Typ aus, der vom Hersteller e mpfohlen wird. Entsorgen Sie den ver brauchten Akku entsprechend der Anweisungen des Herstellers.
Das Notebook ist zwar sehr stabil, kann aber dennoch beschädigt werden.
Damit es nicht dazu kommt, sollten Sie die folgenden Hinweise beachten:
• Das Gerät darf nicht herunterfallen und in anderer Form Stößen ausge-setzt werden. Wenn der Computer fäl lt, können das Gehäuse und andere Komponenten beschädigt werden.
• Das Gerät darf nicht nass werden und sich nicht überhitzen. Computer und
Netzteil dürfen nicht in der Nähe von Wärmequellen stehen oder gelagert werden. Dies ist ein elektrisches Gerät. Wenn Wasser oder andere Flüssigkeiten
eindringen, kann der Computer stark beschädigt werden.
• Vermeiden Sie Interferenzen mit anderen Geräten. Halten Sie den Computer
fern von magnetischen Feldern, die von Stromquellen, Monitoren, Magneten
etc. erzeugt werden. Die kö nnen die Leistung beeinträchtigen und Ihre Daten
beschädigen.
• Achten Sie auf die richtige Bedienung des Computers. Schalten Sie i hn erst
aus, wenn alle Programme geschlossen wurden (speichern Sie Ihre Daten!).
Speichern Sie regelmäßig Ihre Daten, da diese verloren gehen können, wenn der
Deutsch
Akku verbraucht ist.
Reparatur
Nehmen Sie vor dem Reinigen des Wenn Sie versuchen, den Computer
selbst zu reparieren, können Ihre Garantieansprüche verloren gehen. Außerdem besteht Stromschlaggefahr für Ihre Gesundheit und das Gerät
durch frei liegende Teile. Lassen Sie Reparaturarbeiten nur von qualifizierten Reparaturfachleuten durchführen, insbesondere wenn folgende
Umstände vorliegen:
• Wenn das Netzkabel oder der AC/DC-Adapter beschädigt oder zerschlissen sind.
• Wenn der Computer Regen ausgesetzt war oder mit Flüssigkeiten in Berührung
gekommen ist.
• Wenn der Computer unter Beachtung der Bedienungsanweisungen nicht korrekt
arbeitet.
• Wenn der Computer heruntergefallen ist oder beschädigt wurde (berühren Sie
nicht die giftige Flüssigkeit des LCD-Bildschirms).
• Wenn ein ungewöhnlicher Geruch, Hitze oder Rauch aus dem Computer entweicht.
Sicherheitsinformationen
• Verwenden Sie nur einen AC/DC-Adapter, der für die Verwendung mit diesem
Computer zugelassen ist.
• Verwenden Sie nur das Netzkabel und die Akkus, die in diesem Benutzerhandbuch spezifiziert sind.Entsorgen Sie die Akkus nicht in Feuer. Sie können
20
explodieren. Richten Sie sich nach den regional gültigen Entsorgungsvorschriften.
• Verwenden Sie den Akku nicht mehr, wenn er heruntergefallen ist oder in anderer Weise beschädigt (z.B. verzogen) ist. Auch wenn der Computer mit de m
beschädigten Akku zu funktionieren schein, können dadurch Stromkreise
beschädigt werden, die schli eßlich einen Brand verursachen können.
• Achten Sie darauf, dass Ihr Computer ausgeschaltet ist, wenn Sie es fur den
Transport z.B. wahrend einer Reise in eine Tasche einpakken.
• Nehmen Sie vor dem Reinigen des Computers den Akku heraus, und trennen
Sie es von allen externen Stromquellen, Peripheriegeräten und Ka beln (einschließlich Telefonkabel) ab.
• Reinigen Sie den Computer mit einem weichen, sauberen Tuch. Tragen Sie das
Reinigungsmittel nicht direkt auf den Computer auf. Verwenden Sie keine
flüchtigen Reinigungsmittel (Petroleumde stillate) oder Scheuermittel zum
Reinigen des Computers.
• Versuchen Sie nicht, Akkus zu reparieren. Lassen Sie die Akkupacks durch den
Servicevertreter oder qualifiziertes Fachpersonal reparieren oder austauschen.
Polymer Akku Sicherheitshinweise
Beachten Sie die folgenden Hinweise, die sich speziell auf Polymer
Akkus beziehen. Diese Hinweise haben zudem Vorrang gegenüber den
Allgemeinen Akku Sicherheitshinweisen.
• Polymer Akkus können sich etwas ausdehnen oder anschwellen. Dies ist Teil
des Sicherheitsmechanismus des Akkus und kein Anlass zur Sorge.
• Seien Sie vernünftig im Umgang mit Polymer Akkus. Verwenden Sie keine
Polymer Akkus in Umgebungen mit hohen Temperaturen und lagern Sie keine
ungenutzten Akkus über längere Zeiträume.
Schnellstart
Herunterfahren
Bitte beachten Sie, daß der
Computer immer mit dem
Befehl Herunterfahren im
Menü
Start heruntergefah-
ren werden muß.
Dadurch werden Fest-
platten- bzw. Systemprobleme vermieden.
135゚
Abb. 1
Öffnen des Deckels/
LCD/Computers mit
angeschlossenem
AC/DC-Adapter
1. Entfernen Sie das gesamte Verpackungsmaterial.
2. Legen Sie den Computer auf eine stabile Unterlage.
3. Setzen Sie den Akku ein, und stellen Sie sicher , dass sie f est sitzt.
4. Schließen Sie alle Peripheriegeräte, die Sie mit dem Computer
verwenden wollen (z. B. Tastatur und Maus), an die
entsprechenden Schnittstellen an.
5. Schließen Sie den AC/DC-Adapter an die DC-Eingangsbuchse
an der Rückseite des Computers an. Verbinden Sie dann das
Netzkabel mit einer Netzsteckdose und dem AC/DC-Adapter.
6. Klappen Sie den Deckel/LCD vorsichtig mit einer Hand auf, und
öffnen Sie ihn auf einen angenehmen Sichtwinkel (jedoch nicht
weiter als 135°). Mit der anderen Hand halten Sie das Unterteil
des Computers fest (siehe Abb. 1) (Hinweis: Heben Sie den
Computer niemals am Deckel/LCD hoch).
7. Drücken Sie auf den Netzschalter, um den Computer
einzuschalten.
Systemsoftware
Möglicherweise wurde das Notebook bereits mit vorinstallierter Software ausgeliefert. Ist das nicht der Fall, oder
wenn Sie das Notebook für ein anderes System neu konfigurieren möchten, finden Sie dazu eine Anleitung in diesem
Handbuch zu Microsoft Windows 7.
Modllunterschiede
Diese Notebookserie umfasste verschiedene Modelle, die
sich leicht in Design, Farbe und allgemeinen äußeren
Merkmalen voneinander unterscheiden. Ihr Modell kann
zwar äußerlich von dem in dieser Dokument abgebildeten
Modell etwas abweichen, jedoch sind alle Ports, Anschlüsse,
Anzeigen, Spezifikationen und allgemeinen Funktionen bei
allen Modellen gleich.
Deutsch
21
Systemübersicht: Ansicht von vorne mit geöffnetem LCD-Bildschirm
3
9
8
6
7
4
5
3
2
1
2
1
9
8
6
7
4
5
3
10
Modell A
15,6” (39,62cm)
Modell B
17,3” (43,94cm)
Beachten Sie, dass der Funktionsbereich des Touchpads und der
Tasten innerhalb der rot gepunkteten Linien liegt.
Abb. 2
Ansicht von vorne mit geöffnetem LCD-Bildschirm
1. PC-Kamera (optional)
2. LCD-Bildschirm
3. Netzschalter
4. GPU-Taste
5. LED-Anzeigen
6. Hot-Key-Tasten
7. Tastatur
8. Mikrofon
9. Touchpad mit Tasten
10. Fingerabdruckleser
(optional nur für Modell A)
Die Benutzung drahtlos angeschlossener Geräte in Flugzeugen
In der Regel ist die Benutzung jeglicher tragbarer elektronischer F unkgeräte in Flugzeugen verboten. Achten Sie darauf, daß die Wireless-Module AUSGESCHALTET
sind, wenn Sie den Computer im Flugzeug benutzen.
Drücken Sie die entsprechenden Tastenkombinationen, um jeweils das 3.75G/HSPA, das WLAN- oder das Bluetooth-Modul zu aktivieren. Prüfen Sie anhand der LED-Anzeigen/visuellen Anzeigen, ob die Module eingeschaltet sind (siehe Tabelle 4 auf
Seite 25).
9
Deutsch
22
LED-Anzeigen
Modell A
Modell B
Die LED-Anzeigen auf dem Computer zeigen wichtige
Informationen über den aktuellen Status des Computers.
SymbolFarbeBeschreibung
SymbolFarbeBeschreibung
Orange
GrünDer Computer ist angeschaltet
Lampe blinkt grün
OrangeDer Akku wird geladen
GrünDer Akku ist voll geladen
Lampe blinkt
orange
Grün
GrünCaps-Lock ist aktiviert
GrünScroll-Lock ist aktiviert
Der AC/DC-Adapter ist ange-
schlossen
Das System ist im konfigurierten
Energiesparmodus
Der Akku hat einen kritisch nied-
rigen Stromstatus erreicht
Die Funktion NumLk
(Nummerntastatur) ist aktiviert
Tabelle 1 - LED-Anzeigen vorn links
GrünUMA-Modus aktiviert
OrangeOptimus-Modus aktiviert
GrünIntegrierte GPU (iGPU) von Intel aktiviert
OrangeDiskrete GPU (dGPU) von NVIDIA aktiviert
GrünDas WLAN-Modul ist eingeschaltet
OrangeDas Bluetooth-Modul ist eingeschaltet
Weiß Es wird auf die Festplatte zugegriffen
Tabelle 2 - LED-Anzeigen oben
23
Deutsch
Loading...
+ 67 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.