Clevo P650HP6, P650HP6-G, P651HP6, P651HP6-G User guide

V17.5.10

Preface

Notice

The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. ©June 2017

Trademarks

Intel, Pentium and Intel Core are trademarks/registered trademarks of Intel Corporation.

Preface

R&TTE Directive

This device is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC.

This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Luxembourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland, United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slovenia.

ErP Off Mode Power Consumption Statement:

The figures below note the power consumption of this computer in compliance with European Commission (EC) regulations on power consumption in off mode:

• Off Mode < 0.5W

Preface

CE Marking

This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in order to be allowed to sell his product in the European market.

This product conforms to the essential requirements of the R&TTE directive 1999/5/EC in order to attain CE Marking. A notified body has determined that this device has properly demonstrated that the requirements of the directive have been met and has issued a favorable certificate of expert opinion. As such the device will bear the notified body number 0560 after the CE mark.

The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a product. Secondly, CE Marking is mandatory for the product it applies to, whereas most q uality marking s are vo lu ntary.

III

Preface

FCC Statement

(Federal Communications Commission)

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the service representative or an experienc ed radio/TV technician for help.

Operation is subject to the following two conditions:

1. This device may not cause interference. And

2. This device must accept any interference, including interfer ence that may cause undesired operation of the

device.

FCC RF Radiation Exposure Statement:



Warning

Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the manufacturer for compliance with the above standard s could void your authority to operate the equipment.

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Preface

IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment:

1. Do not use this product near water, for example n ear a ba th tub, wash bowl, kitchen sink or laundry tu b, in a wet

basement or near a swimming pool.

2. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There

may be a remote risk of electrical shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special disposal instructions.

5. This product is intended to be supplied by a Listed Power Unit as follows:

•

For Design I Series

•

For Design II Series

- AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19.5V, 11.8A (

- AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19V, 10.5A (

230

Watts) minimum AC/DC Adapter.

200

Watts) minimum AC/DC Adapter.

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.

Do not expose the computer to any shock or vibration.

Do not place it on an unstable surface.

Do not place anything heavy on the computer.

2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating ele-

ment. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

Do not expose it to excessive heat or direct sunlight.

Do not leave it in a place where foreign matter or moisture may affect the system.

Don’t use or store the computer in a humid environment.

Do not place the computer on any surface that will block the Vents/Fan Intakes.

VII

Preface

3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other

strong magnetic fields. These can hinder proper performance and damage your data.

4. Follow the proper workin g procedu res for t he computer. Shut the computer down properly and don’t forget

to save your work. Remember to periodically save your data as data may be lost if the battery is depleted.

Do not turn off the power until you properly shut down all programs.

Do not turn off any peripheral devices when the computer is on.

5. Take care when using peripheral devices.

Use only approved brands of peripherals.

VIII

Do not disassemble the computer by yourself.

Unplug the power cord befor e attaching peripheral devices.

Perform routine maintenance on your computer.

Servicing



Bottom Cover Removal Warning

Users should not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty. If you need to replace/remove the hard disk/RAM/optical device etc., for any reason, please contact your distributor/supplier for further information.

Removal Warning

When removing any cover(s) and screw(s) for the purposes of device upg rade, remember to replace the cover(s) and screw(s) before restoring power to the system.

Also note the following when the cover is removed:

• Hazardous moving parts.

• Keep away from moving fan blades.

Do not attempt to service the computer yourself. Doing so may violate your warranty and may expose you and the computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the power supply. Then refer servicing to qualified service personnel under any of the following conditions:

• When the power cord or AC/DC adapter is damaged or frayed.

• If the computer has been exposed to rain or other liquids.

• If the computer does not work normally when you follow the operating instructions.

• If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks).

• If there is an unusual odor, heat or smoke coming from your computer.

Preface



Power Safety Warning

Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord).

You must also remove your battery in order to prevent accidentally turning the machine on.

Before removing the battery disconnect the AC/DC adapter from the computer.

Power Safety

The computer has specific power requirements:

• Only use a power adapter approved for use with this computer.

• Your AC/DC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifications, consult your service representative or local power company.

• The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.

• When you want to unplug the powe r cord, be sure t o disconnect it by the plug head, not by its wire.

• Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.

• Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC/DC adapter or car adapter).

Do not plug in the power cord if you are wet.

Do not use the power cord if it is broken.

Do not place heavy objects on the power cord.

Preface

Polymer Battery Precautions

Note the following information which is specific to polymer batteries only, and where applicable, this overrides the general battery precaution information overleaf.

• Polymer batteries may experience a slight expansion or swelling, however this is part of the battery’s safety mechanism and is not a cause for concern.

• Use proper handling procedures when using polymer batteries. Do not use polymer batteries in high ambient temperature environments, and do not store unused batteries for extended periods.

See also the general battery precautionary information overleaf for further information.

Preface



Battery Disposal & Caution

The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery in to the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalen t type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions.

General Battery Precautions

• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.

• Do not remove any batteries from the computer while it is powered on.

• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

• If you do not use the battery for an extended period, then remove the battery from the computer for storage.

• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.

• Do not try to repair a battery pack. Refer any battery pack repa ir or replacemen t to you r service repre sentati ve or qu alified service personnel.

• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded.

• Keep the battery away from metal appliances.

• Affix tape to the battery contacts before disposing of the battery.

• Do not touch the battery contacts with your hands or metal objects.

XII

Preface

Cleaning

Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.

Cleaning Instructions

(For Computer Models Supplied with Light Blue Cleaning Cloth) Some computer models in this series come supplied with a light blue cleaning cloth. To clean the computer case with this cloth follow the instructions below:

1. Power off the computer and peripherals.

2. Disconnect the AC/DC adapter from the computer.

3. Use a little water to dampen the cloth slightly.

4. Clean the computer case with the cloth.

5. Dry the computer with a dry cloth, or allow it time to dry before turning on.

6. Reconnect the AC/DC adapter and turn the computer on.

XIII

Preface



Power Off Before Traveling

Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a notebook which is powered on in a travel bag may cause the Vents/Fan Intakes to be blocked. To pre vent your computer from overheating make sure nothing blocks the Vent/Fan Intakes while the computer is in use.

Travel Considerations

As you get ready for your trip, run through this list to make sure the system is ready to go:

1. Check that the battery pack and any spares are fully charged.

2. Power off the computer and peripherals.

3. Close the display panel and make sure it’s latched.

4. Disconnect the AC/DC adapter and cables. Stow them in the carrying bag.

5. The AC/DC adapter uses volt ages from 100 to 240 volt s so you won’t need a second volt age adapter. However,

check with your travel agent to see if you need any socket adapters.

6. Put the notebook in its carrying bag and secure it with the bag’s straps.

7. If you’re taking any perip herals (e.g. a printer, mouse or digital camera), pack them and those devices’ adapters

and/or cables.

8. Anticipate customs - Some jurisdictions may have import restrictions or req uire proof of ownersh ip for both hard -

ware and software. Make sure your “papers” are handy.

XIV

Preface

On the Road

In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind:

Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common. Don’t check it with normal luggage. Baggage handlers may not be sufficiently careful. Avoid knocking the computer against hard objects.

Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the computer, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your computer and disks around the devices. Ask security officials to hand-inspect them (you may be asked to turn it on). Note: Some airports also scan luggage with these devices.

Fly safely - Most airlines have regulations about the use of computers and other electronic devices in flight. These restrictions are for your safety, follow them. If you stow the notebook in an overhead compartment, make sure it’s secure. Contents may shift and/or fall out when the compartment is opened.

Get power where you can - If an electrical outlet is available, use the AC/DC adapter and keep your battery(ies) charged.

Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the computer. Wait a few minutes before turning it on so that any moisture can evaporate.

Preface

Developing Good Work Habits

Developing good work habits is important if you need to work in fron t of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain:

• Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.

• Your knees should be slightly higher than your hips. Place your feet flat on the flo or or on a footrest if necessary.

• Use a chair with a back and adjust it to support your lower back comfortably.

• Sit straight so that your knees, hips and elbows form approximately 90-degree angles when you are working.

• Take periodic breaks if you are using the computer for long periods of time.

Remember to:

• Alter your posture frequently.

• Stretch and exercise your body several times a day.

• Take periodic breaks when you work at the computer for long periods of time. Frequent and short breaks are better than fewer and longer breaks.

XVI

Preface

Lighting

Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders.

• Position the display to avoid glare or reflections from overhead lighting or outside sources of light.

• Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.

• Position the display directly in front of you at a comfortable viewing distance.

• Adjust the display-viewing angle to find the best position.

LCD Screen Care

To prevent image persistence on LCD monitors (caused by the continuous display of graphics on the screen for an extended period of time) take the following precautions:

• Set the Windows Power Plans to turn the screen off after a few minutes of screen idle time.

• Use a rotating, moving or blank screen saver (this prevents an image from being displayed too long).

• Rotate desktop background images every few days.

• Turn the monitor off when the system is not in use.

LCD Electro-Plated Logos

Note that in computers featuring a raised LCD electro-plated logo, the logo is covered by a protective adhesive. Due to general wear and tear, this adhesive may deteriorate over time and the exposed logo may develop sharp edges. Be careful when handling the computer in this case, and avoid touching the raised LCD electro-plated logo. Avoid placing any other items in the carrying bag which may rub against the top of the computer during transport. If any such wear and tear develops contact your distributor/supplier.

XVII

Preface

XVIII

Preface

Contents

Notice .............................................................................................................................................................I

ErP Off Mode Power Consumption Statement: ...........................................................................................II

FCC Statement ............................................................................................................................................IV

FCC RF Radiation Exposure Statement: .....................................................................................................V

Instructions for Care and Operation ......................................................................................................... VII

Servicing .....................................................................................................................................................IX

Power Safety ................................................................................................................................................X

Polymer Battery Precautions ......................................................................................................................XI

General Battery Precautions ..................................................................................................................... XII

Cleaning ...................................................................................................................................................XIII

Cleaning Instructions ...............................................................................................................................XIII

Travel Considerations ..............................................................................................................................XIV

Quick Start Guide

Overview ....................................................................................................................................................1-1

Advanced Users .........................................................................................................................................1-2

Beginners and Not-So-Advanced Users ....................................................................................................1-2

Warning Boxes ..........................................................................................................................................1-2

Not Included ..............................................................................................................................................1-3

System Software ........................................................................................................................................1-4

System Startup ...........................................................................................................................................1-5

XIX

Preface

Model Differences .....................................................................................................................................1-6

LCD Panel Open - Model A ......................................................................................................................1-7

LCD Panel Open - Model B ......................................................................................................................1-8

LED Indicators ...........................................................................................................................................1-9

Illuminated Colored LED Keyboard .......................................................................................................1-10

Illuminated White LED Keyboard ...........................................................................................................1-11

Keyboard Shortcuts .................................................................................................................................1-12

Control Center .........................................................................................................................................1-13

Keyboard Backlight LED ........................................................................................................................1-14

Flexikey® Application ............................................................................................................................1-20

Flexikey® Application Features: .............................................................................................................1-21

Function Keys & Visual Indicators .........................................................................................................1-22

Front & Rear Views - Model A ...............................................................................................................1-23

Front & Rear Views - Model B ...............................................................................................................1-24

Right View - Model A .............................................................................................................................1-25

Right View - Model B .............................................................................................................................1-27

Left View - Model A ...............................................................................................................................1-28

Left View - Model B ................................................................................................................................1-29

Bottom View - Model A - Design I .........................................................................................................1-30

Bottom View - Model A - Design II ........................................................................................................1-31

Bottom View - Model B ..........................................................................................................................1-32

Windows 10 Start Menu ..........................................................................................................................1-33

Preface

Right-Clicking the Windows Logo In Start Menu ..................................................................................1-34

Start Menu Apps & Tiles .........................................................................................................................1-35

Windows 10 Control Panel ......................................................................................................................1-37

Settings ....................................................................................................................................................1-38

Windows 10 Taskbar ...............................................................................................................................1-39

Video Features .........................................................................................................................................1-40

Microsoft Hybrid Graphics Or Discrete Graphics Mode ........................................................................1-41

Power Options .........................................................................................................................................1-45

Storage Devices, Mouse, & Audio

Overview ....................................................................................................................................................2-1

Hard Disk Drive/Solid State Drive ............................................................................................................2-2

Multi-in-1 Card Reader ..............................................................................................................................2-3

Audio Features ...........................................................................................................................................2-4

Setup for 5.1Surround Sound ....................................................................................................................2-5

Setup for Audio Recording ........................................................................................................................2-7

Setup for Headphones/Speakers - Line-Out Jack ......................................................................................2-8

Touchpad and Buttons/Mouse ...................................................................................................................2-9

Touchpad Sensitivity .................................................................................................................................2-9

Mouse Properties Control Panel ..............................................................................................................2-10

Mouse & Touchpad Devices ...................................................................................................................2-12

XXI

Preface

Power Management

Overview ....................................................................................................................................................3-1

The Power Sources ....................................................................................................................................3-2

AC/DC Adapter .........................................................................................................................................3-2

Battery ........................................................................................................................................................3-3

Turning On the Computer ..........................................................................................................................3-4

Shutting the Computer Down ....................................................................................................................3-5

Power Plans ...............................................................................................................................................3-6

Power-Saving States ..................................................................................................................................3-8

Sleep ..........................................................................................................................................................3-8

Hibernate ....................................................................................................................................................3-9

Shut down ..................................................................................................................................................3-9

Configuring the Power Buttons ...............................................................................................................3-10

Resuming Operation ................................................................................................................................3-12

Power Conservation Modes .....................................................................................................................3-13

Settings Menu Power Controls ................................................................................................................3-15

Battery Information .................................................................................................................................3-18

Battery Power ..........................................................................................................................................3-18

Conserving Battery Power .......................................................................................................................3-19

Battery Life ..............................................................................................................................................3-20

New Battery .............................................................................................................................................3-20

Recharging the Battery with the AC/DC Adapter ...................................................................................3-20

XXII

Preface

Proper handling of the Battery Pack ........................................................................................................3-21

Battery FAQ .............................................................................................................................................3-22

Drivers & Utilities

What to Install ............................................................................................................................................4-1

Module Driver Installation ........................................................................................................................4-1

Driver Installation ......................................................................................................................................4-2

Updating/Reinstalling Individual Drivers ..................................................................................................4-5

User Account Control ................................................................................................................................4-6

Windows Security Message .......................................................................................................................4-6

New Hardware Found ................................................................................................................................4-6

Driver Installation Procedure .....................................................................................................................4-7

Chipset .......................................................................................................................................................4-7

Video (VGA) .............................................................................................................................................4-7

NVIDIA Video (VGA) ..............................................................................................................................4-7

LAN ...........................................................................................................................................................4-8

Card Reader ...............................................................................................................................................4-8

Touchpad ...................................................................................................................................................4-8

Control Center ...........................................................................................................................................4-8

Airplane .....................................................................................................................................................4-8

MEI Driver .................................................................................................................................................4-8

Audio .........................................................................................................................................................4-9

XXIII

Preface

Optional Drivers ......................................................................................................................................4-10

BIOS Utilities

Overview ....................................................................................................................................................5-1

The Power-On Self Test (POST) ...............................................................................................................5-2

Failing the POST .......................................................................................................................................5-3

Fatal Errors ................................................................................................................................................5-3

Non-Fatal Errors ........................................................................................................................................5-3

The Setup Utility ........................................................................................................................................5-4

Entering Setup ...........................................................................................................................................5-4

Setup Screens .............................................................................................................................................5-5

Main Menu .................................................................................................................................................5-6

SATA Port # (Main Menu) ........................................................................................................................5-6

OffBoard SATA/NVme Controller Configuration (Main Menu) .............................................................5-7

System Time & Date (Main Menu) ...........................................................................................................5-7

System/Extended Memory (Main Menu) ..................................................................................................5-7

MB Series/BIOS Revision/KBC/EC firmware Revision/VGA Card /VBIOS Revision/VBIOS Build Date/

Mac Address (Main Menu) ........................................................................................................................5-7

Advanced Menu .........................................................................................................................................5-8

Advanced Chipset Control (Advanced Menu) ..........................................................................................5-8

FlexiCharger (Advanced Menu > Advanced Chipset Control) .................................................................5-9

MSHybrid or DISCRETE Switch (Advanced Menu > Advanced Chipset Control) ...............................5-10

XXIV

Preface

GPU Performance Scaling (Advanced Menu > Advanced Chipset Control) ..........................................5-10

VT-d (Advanced Menu > Advanced Chipset Control) ............................................................................5-10

Software Guard Extensions (Advanced Menu > Advanced Chipset Control) ........................................5-11

Overclocking Performance Menu (Advanced Menu) ..............................................................................5-11

SATA Mode (Advanced Menu) ..............................................................................................................5-12

Boot Logo (Advanced Menu) ..................................................................................................................5-13

Power On Boot Beep (Advanced Menu) .................................................................................................5-13

Battery Low Alarm Beep (Advanced Menu) ...........................................................................................5-13

Security Menu ..........................................................................................................................................5-14

Set Supervisor Password (Security Menu) ..............................................................................................5-14

Set User Password (Security Menu) ........................................................................................................5-15

Password on boot: (Security Menu) ........................................................................................................5-15

Secure Boot Control (Security Menu) .....................................................................................................5-16

TPM Configuration (Security Menu) ......................................................................................................5-17

Boot Menu ...............................................................................................................................................5-18

Boot Option Priorities (Boot Menu) ........................................................................................................5-19

UEFI Boot (Boot Menu) ..........................................................................................................................5-19

Exit Menu ................................................................................................................................................5-20

Modules

Overview ....................................................................................................................................................6-1

Setting Up SATA RAID, Optane™ or AHCI Mode .................................................................................6-2

XXV

Preface

AHCI Mode ...............................................................................................................................................6-2

Intel® Optane™ ........................................................................................................................................6-2

RAID ..........................................................................................................................................................6-2

Intel® Rapid Storage Technology Application .........................................................................................6-3

RAID Setup Procedure ..............................................................................................................................6-5

RAID Setup - UEFI Enabled .....................................................................................................................6-6

RAID Setup (2 * PCIE SSDs) - UEFI Enabled .......................................................................................6-11

RAID Setup - UEFI Disabled ..................................................................................................................6-17

Deleting a RAID (Windows 10) ..............................................................................................................6-21

Intel® Optane™ Setup Procedure ...........................................................................................................6-22

Clearing Intel® Optane™ ........................................................................................................................6-26

Wireless LAN Module .............................................................................................................................6-29

Intel® WLAN Driver Installation ............................................................................................................6-30

Qualcomm Atheros WLAN Combo Driver Installation ..........................................................................6-30

WLAN AC/AD Combo Driver Installation .............................................................................................6-31

WLAN Configuration in Windows 10 ....................................................................................................6-32

Fingerprint Reader Module ......................................................................................................................6-35

Fingerprint Reader Driver Installation .....................................................................................................6-36

Fingerprint Module Configuration ..........................................................................................................6-37

Bluetooth & WLAN Combo Module ......................................................................................................6-39

Intel Bluetooth Combo Driver Installation ..............................................................................................6-40

Qualcomm Atheros/WLAN AC/AD Bluetooth Combo Driver Installation ...........................................6-40

XXVI

Preface

Bluetooth Configuration in Windows ......................................................................................................6-41

To Make your Computer Discoverable to Bluetooth Devices .................................................................6-43

WLAN AC/AD WiGig Driver Installation ..............................................................................................6-44

Sound Blaster Audio ................................................................................................................................6-45

Sound Blaster X-Fi MB-5 Audio AP Installation ....................................................................................6-45

Intel® Software Guard Extensions Driver ...............................................................................................6-55

Intel SGX Driver Installation ...................................................................................................................6-55

Intel® Rapid Storage Technology ...........................................................................................................6-56

IRST Driver Installation ..........................................................................................................................6-56

Intel® Rapid Storage Technology for RAID Systems ............................................................................6-57

RAID Volume Data Verification and Repair ..........................................................................................6-59

Replacing and Reverting Recovery and Master Volumes .......................................................................6-59

Intel® Rapid Storage Technology for Optane Systems ...........................................................................6-62

Enabling Intel® Optane™ .......................................................................................................................6-63

Disabling Intel® Optane™ ......................................................................................................................6-66

PC Camera ...............................................................................................................................................6-68

Camera App .............................................................................................................................................6-69

Taking Pictures/Capturing Video ............................................................................................................6-71

Trusted Platform Module .........................................................................................................................6-73

Enabling & Managing TPM ....................................................................................................................6-74

TPM Management in Windows ...............................................................................................................6-75

TPM Actions ............................................................................................................................................6-77

XXVII

Preface

3G/4G Module .........................................................................................................................................6-79

3G/4G Configuration in Windows 10 ......................................................................................................6-81

Troubleshooting

Overview ....................................................................................................................................................7-1

Basic Hints and Tips ..................................................................................................................................7-2

Backup and General Maintenance .............................................................................................................7-3

Viruses .......................................................................................................................................................7-4

Upgrading and Adding New Hardware/Software ......................................................................................7-5

Problems and Possible Solutions ...............................................................................................................7-7

Resolving the “Can’t connect to this network” issue with the 3G/4G Module .......................................7-18

Intel® Optane™ Notes ............................................................................................................................7-19

Interface (Ports & Jacks)

Overview ...................................................................................................................................................A-1

Ports and Jacks ..........................................................................................................................................A-2

2-in-1 Audio Jack (Headphone-Out & S/PDIF-Out Jack) ........................................................................A-2

Card Reader ..............................................................................................................................................A-2

DC-In Jack ................................................................................................................................................A-2

HDMI-Out Port .........................................................................................................................................A-2

Line-Out Jack ............................................................................................................................................A-2

Microphone-In Jack ..................................................................................................................................A-3

Mini DisplayPort 1.3 ................................................................................................................................A-3

XXVIII

Preface

RJ-45 LAN Jack .......................................................................................................................................A-3

Security Lock Slot ....................................................................................................................................A-3

USB 3.1 (USB 3.1 Gen 2 Type C) Port ....................................................................................................A-4

USB 3.0 (USB 3.1 Gen 1 Type A) Port ....................................................................................................A-4

Powered USB 3.0 (USB 3.1 Gen 1 Type A) Port .....................................................................................A-4

Control Center & Flexikey®

Overview ...................................................................................................................................................B-1

Control Center ..........................................................................................................................................B-1

Flexikey® .................................................................................................................................................B-1

Power Modes ............................................................................................................................................B-3

Control Center Menus ...............................................................................................................................B-4

Power Status (System Program) .............................................................................................................B-5

Brightness (System Program) ..................................................................................................................B-5

Volume (System Program) .......................................................................................................................B-5

Fan Speed (System Program) ...................................................................................................................B-5

This system supports Power Saving power .........................................................................................B-6

Sleep Button (System Program) ..............................................................................................................B-6

Desktop Background (System Program) .................................................................................................B-6

Display Switch (System Program) ...........................................................................................................B-6

Time Zone (System Program) .................................................................................................................B-6

Display Utility (System Program for High Definition displays only) .....................................................B-6

XXIX

Preface

TouchPad/Camera (Device) .....................................................................................................................B-7

FlexiAccess (Device) ...............................................................................................................................B-7

Caps Lock/Scroll Lock/ Number Lock/Airplane Mode ...........................................................................B-7

Left Windows Key (Gaming) ..................................................................................................................B-7

GPU Switch (Gaming) .............................................................................................................................B-8

Headphone (Gaming) ...............................................................................................................................B-8

Headphone Impedance (Gaming) ............................................................................................................B-8

Flexikey® (Gaming) .................................................................................................................................B-8

Display Utility (System Program for High Definition displays only) ......................................................B-9

CPU / Memory Overclocking Support ...................................................................................................B-12

CPU Overclocking ..................................................................................................................................B-14

Memory Overclocking ............................................................................................................................B-15

GPU Overclocking ..................................................................................................................................B-16

GPU Overclocking ..................................................................................................................................B-18

Flexikey® Application ...........................................................................................................................B-21

Language Interface .................................................................................................................................B-22

Keyboard Settings - Express Key ...........................................................................................................B-26

Enabling Time Record ............................................................................................................................B-28

Keyboard Settings - Launch App ...........................................................................................................B-30

Keyboard Settings - Express Text ..........................................................................................................B-32

Keyboard Settings - Disable ...................................................................................................................B-34

Mouse Settings - Express Key ................................................................................................................B-35

XXX

Preface

Enabling Time Record for Mouse Settings ............................................................................................B-36

Mouse Settings - Launch App ................................................................................................................B-37

Mouse Settings - Express Text ...............................................................................................................B-39

Mouse Settings - Disable ........................................................................................................................B-41

Statistics ..................................................................................................................................................B-42

Video Driver Controls

Overview ...................................................................................................................................................C-1

Microsoft Hybrid Graphics Or Discrete Graphics Mode .........................................................................C-2

Microsoft Hybrid Graphics .......................................................................................................................C-3

Video Driver Installation ..........................................................................................................................C-5

Video (VGA) ............................................................................................................................................C-5

NVIDIA Video (VGA) .............................................................................................................................C-5

NVIDIA GeForce Experience ..................................................................................................................C-6

Configure Other Displays Using Project ..................................................................................................C-7

You can configure attached displays from Project. ..................................................................................C-7

Configuring an External Display In Windows .........................................................................................C-8

HDMI Audio Configuration .....................................................................................................................C-9

Wireless Display .....................................................................................................................................C-12

Wireless Display Configuration .............................................................................................................C-13

Display Devices & Options ....................................................................................................................C-15

NVIDIA Control Panel ...........................................................................................................................C-16

XXXI

Preface

Customization Options ...........................................................................................................................C-20

Change Resolution ..................................................................................................................................C-24

Display Devices - NVIDIA CP ...............................................................................................................C-25

Configuring an External Display (NVIDIA) ..........................................................................................C-26

HDCP Status ...........................................................................................................................................C-30

Adjust Video Settings .............................................................................................................................C-31

Configure Surround, PhysX® .................................................................................................................C-32

G-SYNC .................................................................................................................................................C-33

Set Digital Audio ....................................................................................................................................C-35

Intel® HD Graphics Control Panel .........................................................................................................C-36

Attaching Other Displays - Intel HDGCP ..............................................................................................C-49

Specifications

Note ...........................................................................................................................................................D-2

Core Logic ................................................................................................................................................D-2

Display ......................................................................................................................................................D-2

Memory .....................................................................................................................................................D-2

Storage ......................................................................................................................................................D-2

Audio ........................................................................................................................................................D-2

Keyboard & Pointing Device ....................................................................................................................D-3

Interface ....................................................................................................................................................D-3

Card Reader ..............................................................................................................................................D-3

XXXII

Preface

Card Slots ..................................................................................................................................................D-3

Communication .........................................................................................................................................D-4

Power & Battery .......................................................................................................................................D-4

Power Management ..................................................................................................................................D-4

Indicators ..................................................................................................................................................D-4

BIOS .........................................................................................................................................................D-4

Operating System ......................................................................................................................................D-4

Security .....................................................................................................................................................D-4

Features .....................................................................................................................................................D-4

Environmental Spec ..................................................................................................................................D-5

Dimensions & Weight ..............................................................................................................................D-5

XXXIII

Preface

XXXIV

Quick Start Guide

Chapter 1: Quick Start Guide

Overview

This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following:

• Chapter 2 A guide to using some of the main features of the computer e.g. the storage devices (hard disk and card reader), TouchPad & Mouse and Audio Features.

• Chapter 3 The computer’s power management options.

• Chapter 4 The installation of the drivers and utilities essential to the operation or improvement of some of the computer’s subsystems.

• Chapter 5 An outline of the computer’s built-in software or BIOS (Basic Input Output System).

• Chapter 6 A quick guide to the computer’s PC Camera, Wireless LAN, Fingerprint, Bluetooth & WLAN Combo, Sound Blaster Audio and Intel modules (some of which may be optional depending on your purchase configuration).

• Chapter 7 A troubleshooting guide.

• Appendix A Definitions of the interface, ports/jacks which allow your computer to communicate with external devices.

• Appendix B Information on the Control Center . and Flexikey® Application.

• Appendix C Information on the Video driver controls.

• Appendix D The computer’s specification.

Overview 1 - 1



Notes

Check the light colored boxes with the mark above to find detailed information about the computer’s features.

Quick Start Guide

Advanced Users

If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “Drivers & Utilities” on page 4 - 1 and “BIOS Utilities” on page 5 - 1 in the User’s Manual. You may also find the notes marked with a

 of interest to you.

Beginners and Not-So-Advanced Users

If you are new to computers (or do not have an advanced knowledge of them) then the information contained in this Quick Start Guide should be enough to get you up and running. Eventually you should try to look through all the documentation (more detailed descriptions of the functions, setup and system controls are covered in the remainder of the User’s Manual), but do not worry if you do not understand everything the first time. Keep this manual nearby and refer to it to learn as you go. You may find it useful to refer to the notes marked with a

 as indicated in the margin.

For a more detailed description of any of the interface ports and jacks see “Interface

(Ports & Jacks)” on page A - 1.

Warning Boxes

No matter what your level please pay careful attention to the warning and safety information indicated by the

 symbol. Also please note the safety and handling instructions as indicated in the Preface.

1 - 2 Overview

Quick Start Guide



Drivers

If you are installing new system software, or are re-configuring your computer for a different system, you will need to install the appropriate drivers. Drivers are programs which act as an interface between the computer and a hardware component e.g. a wireless network module. It is very important that you install the drivers in the order listed in Table 4 - 1, on page 4

- 4. You will be unable to use most advanced controls until the necessary drivers and utilities are properly installed. If your

system hasn’t been properly configured (your service representative may have already done that for you), refer to “Drivers

& Utilities” on page 4 - 1 for installation instructions.

Ports and Jacks

See “Ports and Jacks” on page A - 2 for a description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc.

Not Included

Operating Systems (e.g. Windows 10) and applications (e.g. word processing, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals.

Overview 1 - 3



Windows OS

Note that the information included on the following pages is for Windows 10 only. In order to run Windows 10 (64-bit) your computer requires a minimum 8GB of system memory (RAM).

Quick Start Guide

System Software

Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the Windows 10 (64-bit) operating system is supported.

1 - 4 Overview

Quick Start Guide

135°



Shutdown

Note that you should always shut your computer down by choosing the Shut

Down command in Windows. This will help pre-

vent hard disk or system problems.

Figure 1 - 1 - Computer with AC/DC Adapter Plugged-In/Opening the Lid/LCD

System Startup

1. Remove all packing materials, and place the computer on a stable surface, and securely attach any peripherals

you want to use with the notebook (e.g. keyboard and mouse) to their ports.

2. When first setting up the computer use the following procedure (as to safeguard the computer during

shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below):

• Attach the AC/DC adapter cord to the DC-In jack at the re ar of the compu ter, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter and leave it there for 6 seconds or longer.

• Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked.

3. Use one hand to raise the the other hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).

4. Press the power button on the top of the computer for about 2 - 3 seconds to turn the compu ter “on” (note that the power LED on the front of the computer will turn from orange to green when the computer powers on).

lid/LCD to a comfortable viewing angle (it is preferable not to exceed 135 degrees);

use

System Startup 1 - 5

Quick Start Guide

Model Differences

This notebook series includes two different model types, and different design styles within each model series. These models and design styles mainly differ as indicated in the table below. Note that your mo del may appear slightly different from those pictured in this manual.

Feature Model A Model B

Design I Design II Design I Design II

15.6" (39.62cm) QFHD (3840 * 2160) / FHD (1920 *

Display Type

3G/4G Module

Subwoofer Speaker Not Supported One Built-In Subwoofer Speaker

AC/DC Adapter

Dimensions & Weight See “Dimensions & Weight” on page A - 5 for details of the dimensions and weight for each model and design.

Note

(Note the some models only support FHD (1920 * 1080)

LTE/UTMS/HSPA+ M.2 3042 3G or 4G Module Card

AC Input of 100 - 240V, 50 -

60Hz, DC Output of 19.5V,

11.8A (230 Watts) minimum

Model A had two distinct design styles with the ports in different locations on the computer, depending on the design style.

1080) 3.5mm 16:9 Backlit Panel

panels

(optional) with USB Interface

AC Input of 100 - 240V, 50 -

AC/DC Adapter

10.5A (200 Watts) minimum

However the number of ports etc in each design style are identical.

60Hz, DC Output of 19V,

AC/DC Adapter

17.3" (43.94cm) FHD (1920 * 1080) 6.2mm, 16:9 Backlit Panel

Not Supported

AC Input of 100 - 240V, 50 -

60Hz, DC Output of 19.5V,

11.8A (230 Watts) minimum AC/DC Adapter

AC Input of 100 - 240V, 50 -

60Hz, DC Output of 19V,

10.5A (200 Watts) minimum AC/DC Adapter

Table 1 - 1 - Model Differences

1 - 6 Model Differences

LCD Panel Open - Model A

Figure 1 - 2

LCD Panel Open

Model A

1. Built-In PC Camera

2. PC Camera LED

3. Built-In Array Microphone

4. LCD

5. Speakers

6. Power Button

7. Illuminated LED Keyboard

8. TouchPad & Buttons

9. Fingerprint Reader Sensor (Optional)

Note that the Touchpad/ Clickpad and Buttons has a valid operational area indicated within the dotted lines above.



Wireless Device

Operation Aboard

Aircraft

The use of any portable electronic transmission devices (e.g. WLAN, Bluetooth or 3G/4G) aboard aircraft is usually prohibited. Make sure any wireless modules are OFF (i.e. the system is in Airplane Mode) if you are using the computer aboard aircraft.

Use Fn + F11 Airplane Mode key combination to toggle Airplane Mode On/ Off, and check the LED indicator for the power status.

Quick Start Guide

LCD Panel Open - Model A 1 - 7

Figure 1 - 3

LCD Panel Open

Model B

1. Built-In PC Camera

2. PC Camera LED

3. Built-In Array Microphone

4. LCD

5. Speakers

6. Power Button

7. Illuminated LED Keyboard

8. TouchPad & Buttons

9. Fingerprint Reader Sensor (Optional)

Note that the Touchpad/ Clickpad and Buttons has a valid operational area indicated within the dotted lines above.



Wireless Device

Operation Aboard

Aircraft

Use Fn + F11 Airplane Mode key combination to toggle Airplane Mode On/ Off, and check the LED indicator for the power status.

Quick Start Guide

LCD Panel Open - Model B

1 - 8 LCD Panel Open - Model B

Quick Start Guide

LED Indicators

The LED indicators display helpful information about the current status of the computer.

Icon Color Description Icon Color Description

Green

Green Hard Disk Activity Orange AC/DC Power is Plugged In

Green

Off MSHYBRID Mode Green The Computer is On

Green Discrete Mode Blinking Green The Computer is in Sleep Mode

Airplane Mode is ON (the WLAN, Bluetooth

Number Lock is Activated

Caps Lock is Activa ted

Scroll Lock is Activated

& 3G/4G Modules are OFF)

Orange The Battery is Charging

Blinking Orange

Green The Battery is Fully Charged

Blinking Orange*

The Battery has Reached Critically Low

(see

“Powered USB 3.0 Port” on page 1 - 28

Power Status

The Powered USB Port is On

Table 1 - 2 - LED Indicators

LCD Panel Open - Model B 1 - 9

)



Other Keyboards

If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/hot-keys unique to the system’s regular keyboard may not work.

Scr Lk

Hold down the Fn Key and Scr Lk to enable scroll lock and check the LED indicator for status.

Numerical

Play/Pause Key

Function Keys

Scr Lk Key

Fn Key

Game Control Keys

Num Lk Key

Windows Logo Key

Menu/Application Key

Numerical Keypad



Special Characters

Some software applications allow the number-keys to be used with Alt to produce special characters. These special characters can only be produced by using the numeric keypad. Regular number keys (in the upper row of the keyboard) will not work. Make sure that NumLk is on.

Quick Start Guide

Illuminated Colored LED Keyboard

The illuminated colored keyboard has an embedded numerical keypad for easy numeric data input, and features function keys to allow you to change operational features instantly. See Table 1 - 6, on page 1 - 22 for full function key combination details.

1 - 10 Illuminated Colored LED Keyboard

Figure 1 - 4 - Illuminated LED Keyboard

Illuminated White LED Keyboard



Other Keyboards

Scr Lk

Hold down the Fn Key and Scr Lk to enable scroll lock, and check the LED indicator for status.

Numerical

Play/Pause Key

Function Keys

Scr Lk Key

Fn Key

Game Control Keys

Num Lk Key

Windows Logo Key

Menu/Application Key

Numerical Keypad



Special Characters

(For some Design II Series Models) The illuminated white keyboard has an embedded numerical keypad for easy numeric data input, and features function keys to allow you to change operational features instantly. See Table 1 - 6, on page 1 - 22 for full function key combination details.

Figure 1 - 5 - Illuminated LED Keyboard

Illuminated White LED Keyboard 1 - 11

Quick Start Guide



Windows Logo

Keyboard Shortcut

Use the Windows logo key + D key com- bination to switch between the Start screen and Windows Desktop.

Menu/Application

Keyboard Shortcut

When the Desktop app is running you can use the Menu/Application key on the keyboard to display the context menu as per a mouse right-click.

Quick Start Guide

Keyboard Shortcuts

The following Windows Logo Key (Winkey) keyboard shortcuts are useful for navigation/operation in

Windows 10

Windows Logo

Tap Winkey Toggle the Start menu

+ Number (1, 2, etc) Launch an application from the taskbar (numbered from left to right)

1 - 12 Illuminated White LED Keyboard

Key +

A Open the Action Center B Select the Taskbar Notification Area C Launch Cortana (in listening mode) D Toggle the Desktop E Launch File Explorer (Quick Access tab)

Table 1 - 3 - Keyboard Shortcuts

Description

Quick Start Guide



Control Center Access

To run the Control Center press the Fn + Esc key combination, or doubleclick the icon

in the notification area of the taskbar.

Close the Control Center by clicking the close icon in the top right of the panel (move the cursor onto the top right corner of the panel to highlight it).

Control Center

When in the Windows Desktop application (not in the Start screen) press the Fn + Esc key combination, or double-click the icon trol Center gives quick access to frequently used controls and enables you to quickly turn the camera/Touch

Pad on/off (see Appendix B for full details).

in the notification area of the taskbar to toggle the Control Center on/off. The Con-

Figure 1 - 6 - Control Center

Control Center 1 - 13

2 3

234

Quick Start Guide

Keyboard Backlight LED

(For Illuminated Colored Keyboards Only)

Press Fn plus the key to toggle the keyboard LED on/off. The keyboard LED may be configured using the Fn + key combination outlined in the table below. In addition press Fn plus the keyboard backlight application to configure the settings (see overleaf).

Main Keyboard Colored LED Function key Combinations

key to launch the

Fn +

Launch the Keyboard Backlight Application

Toggle the Keyboard Backlight LED On/Off

Keyboard Backlight LED Low

Keyboard Backlight LED High

Table 1 - 4 - Main Keyboard LEDs

1 - 14 Keyboard Backlight LED

Quick Start Guide

Help Butt

Keyboard Sections

Color Swatches

Effects Buttons

Keyboard Backlight Application (for Illuminated Colored Keyboards)

The Keyboard Backlight application can be accessed by pressing the Fn plus key (or by clicking the Flexikey button in the Gaming section of the Control Center, and then clicking the Backlight tab).

Figure 1 - 7 - Keyboard Backlight Application

Keyboard Backlight LED 1 - 15

Full Color Swatch 256 Color Scheme Swatch

Quick Start Guide

Brightness

Click on any of the numbers (0 - 3) on the brightness bar to set the brightness level of the keyboard backlight.

Color Swatch

The color swatch in the top right of the screen allows you to select a range of colors for your keyboard backligh t by clicking on the color required. You can choose to display the swatch either in Full Color or as a 256 Color Scheme. Click the Custom mode button to select any colors from the swatch and to apply your chosen colors to parts of the keyboard (and Top Case Logo LED if applicable).

Figure 1 - 8 - Keyboard Backlight Color Swatches

1 - 16 Keyboard Backlight LED

Quick Start Guide



Illumination Keys

Note that the keyboard illumination (increase/decrease) keys may be used to configure the keyboard LED in Cus-

tom Mode only.

Modes

The buttons surrounding the swatch allow you to alter the effects of the keyboard backligh t. Click on any of the buttons to view the effects on the keyboard. Click Save when exiting the application to retain the setting.

Mode Buttons

Custom - Display & Configure

Keyboard Sections & Colors

Random Color

Breathe (All Colors)

Cycle Colors

Wave Up/Down

Dancing Effect

Tempo Beat

Flashing

Table 1 - 5 - Mode Buttons

Keyboard Backlight LED 1 - 17

Quick Start Guide

Preview

The bottom left section of the application allows you to preview setting changes made to colors on the keyboard.

Keyboard LED Sections

The bottom right section of the application allows you to select partial areas, or all, of the keyboard on which to apply the color changes and effects.

Figure 1 - 9 - Preview & Keyboard LED Sections

1 - 18 Keyboard Backlight LED

Quick Start Guide

Sets

The application allows you to save up to 3 sets of color and effect combinations. Click Save when exiting the application to retain the settings.

Figure 1 - 10 - Sets

Save & Exit

Click Exit to quit the application without saving, or Save to exit and retain the settings.

Figure 1 - 11 - Save & Exit

Keyboard Backlight LED 1 - 19

Flexikey® Enabled

Flexikey® Disabled

Quick Start Guide

Flexikey® Application

The Flexikey® application is a quick hotkey configuration application, which allows you to assign a single key to launch multiple key combinations, or to launch programs and applications, to create text macros and to disable certain keys. The application can also be used to configure the mouse buttons to create hotkeys for gaming etc. All the configuration settings are retained under (up to12) profiles to which the settings are applied. Click Flexikey® in the Gaming section of the Control Center, or the click the icon in the notification area of the taskbar, to launch the application (see Appendix B for full details).

1 - 20 Flexikey® Application

Figure 1 - 12 - Flexikey® Hotkey Application

Quick Start Guide

Flexikey® Application Features:

For full details see “Flexikey® Application” on page B - 21.

• EXPRESS KEY - This feature allows you to configure a single key (or mouse click) to send multiple key

combinations, or to create more useful shortcut keys This is useful in gaming or when using applications which have a complex set of keyboard shortcuts.

• LAUNCH APP - This simply assigns single keys (or mouse clicks) to launch any program’s or application’s

executable file.

• EXPRESS TEXT - With this you can assign single keys (or mouse clicks) to send commonly used strings

of text.

• DISABLE - Use this function to disable any keyboard keys or mouse buttons.

• STATISTICS - Use this to quickly record keys in use in any application, and to disable unused keys.

Flexikey® Application 1 - 21

Quick Start Guide

Function Keys & Visual Indicators

The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down.

Keys Function/Visual Indicators Keys Function/Visual Indicators

Fn +

Fan Control Toggle

Automatic / Full

Power

Fn +

Control Center Toggle (see over)

Fn +

Display Toggle

Brightness Decrease/Increase

PC Camera

Power T oggle

Airplane

Mode Toggle

Sleep Toggle

Fn +

Fn + Power Button Powered USB 3.0 Port Power Toggle Fn + Backspace Flexikey® Enable/Disable

Play/Pause (in Audio/Video Programs)

Touchpad Toggle

Mute Toggle

Backlight Keyboard

Toggle Off/High/Low

(White Illuminated

Keyboards Designs

Volume Decrease/Increase

Table 1 - 6 - Function Keys & Visual Indicators

*Note: It is recommended that you use Maximum fan speed when playing games (use Fn + 1).

1 - 22 Flexikey® Application

Front & Rear Views - Model A

Figure 1 - 13

Front & Rear Views

Model A

1. LED Power Indicators

2. Vent/Fan Intake

3. DC-In Jack

4. HDMI-Out Port -

Design I Only

5. Mini DisplayPort -

Design I Only

6. USB 3.0 Port (USB

3.1 Gen 1) - Design

II Only



USB Ports

Note that the connections to the USB ports only fit one way, do not force them.

Overheating

To prevent your computer from overheating make sure n othing blocks the vent(s)/fan intake(s) while the computer is in use.



HDMI Port / Mini Display Port

Note that the HDMI Port and Mini Display ports support video and audio signals to attached external displays (see “HDMI Audio Configuration” on pag e C - 9).

Design II

Design I

Quick Start Guide

Front & Rear Views - Model A 1 - 23

Figure 1 - 14

Front & Rear Views

Model B

1. LED Power Indicators

2. Vent/Fan Intake

3. DC-In Jack

4. HDMI-Out Port

5. Mini DisplayPort 1



USB Ports

Note that the connections to the USB ports only fit one way, do not force them.

Overheating

To prevent your computer from overheating make sure nothing blocks the vent(s)/ fan intake(s) while the computer is in use.



HDMI Port / Mini Display Port

Note that the HDMI Port and Mini Display ports support video and audio signals to attached external displays (see “HDMI Audio Configuration” on page C - 9).

Quick Start Guide

Front & Rear Views - Model B

1 - 24 Front & Rear Views - Model B

Right View - Model A

Figure 1 - 15

Right View

Model A

1. 2-In-Audio Jack (Headphone / S/PDIF-Out Jack)

2. Microphone Jack

3. Line-Out Jack

4. SIM Card Reader (for 3G/4G USIM Cards - see over)

5. Multi-in-1 Card Reader

6. USB 3.0 Port (USB

3.1 Gen 1)

7. RJ-45 LAN Jack

8. Security Lock Slot

9. 2 * USB 3.1 Gen 2 (Type C) Ports -

Design II Only

1 3



Multi-in-1 Card Reader

The card reader allows you to use the most popular digital storage card formats:

MMC (MultiMedia Card) / RSMMC

SD (Secure Digital) / Mini SD / SDHC / SDXC



USB 3.1 Gen 2 Port Speed

Note that when a single USB device is plugged in to a USB 3.1 (Gen 2) port the data transfer speed will be 10Gbps, however when two devices are plugged in to both USB 3.1 (Gen 2) ports, this bandwidth will be shared between the ports.

1 3

9 9

Design II

Design I

Quick Start Guide

Right View - Model A 1 - 25



USIM Card Orienta-

tion

Note that the USIM card’s readable side (with the gold-colored contacts) should face upwards as illustrated.

Figure 1 - 16

USIM Card Insertion



USIM Card Ejection

Simply press on the USIM card to eject it, however do not do this while a connection is in progress.

If you do eject the card while a 3G/4G connection is ongoi ng, you will need to sh ut down the system, reinsert the USIM card, restart the system and then reestablish the 3G/4G connection.

If you wish to change USIM cards then you will need to shut the system down, reinsert the USIM card, restart the system and then reestablish the 3G/4G connection.

Quick Start Guide

3G/4G Module USIM Card Installation

(For Model A Computers Only) Insert the USIM card as illustrated below (pay careful attention to the orientation of the card as the gold contact side of the card should face upwards) until it clicks fully into position. To eject the card simply press it until it ejects, but do not attempt to eject the card while connected to a 3G/4G network (see below).

1 - 26 Right View - Model A

Right View - Model B

Figure 1 - 17

Right View

Model B

1. 2-In-Audio Jack (Headphone / S/PDIF-Out Jack)

Microphone Jack

3. Line-Out Jack

4. Multi-in-1 Card Reader

5. USB 3.0 Port (USB 3.1 Gen 1)

6. RJ-45 LAN Jack

7. Security Lock Slot



USB Ports

Note that the connections to the USB ports only fit one way, do not force them.



Multi-in-1 Card Reader

The card reader allows you to use the most popular digital storage card formats:

MMC (MultiMedia Card) / RSMMC

SD (Secure Digital) / Mini SD / SDHC / SDXC

Quick Start Guide

Right View - Model B 1 - 27

Figure 1 - 18

Left View - Model A

1. Vent/Fan Intake

2. Mini DisplayPort

3. 2 * USB 3.1 Gen 2

(Type C) Ports -

Design I Only

4. USB 3.0 Port (USB

3.1 Gen 1)

5. 1 * Powered USB

3.0 Port (USB 3.1 Gen 1)

6. HDMI-Out Port -

Design II Only



USB 3.1 Gen 2

Port Speed

2 43



Powered USB 3.0 Port

Note that the USB 3.0 port is not operational under DOS and does not support wake on USB. The powered USB 3.0 ( in Figure 1 - 18 on page 1 - 28) port can supply power (for charging devices only, not for operating devic es) when the system is off but still powered by the AC/DC adapter plugged into a working outlet, or powered by the battery with a capacity level above 20% (this may not work with certain devices - see page 7 - 11). Toggle power to this port by using Fn + power button.

HDMI Port / Mini Display Port 1.3

Note that the HDMI Port and Mini Display ports support video and audio signals to attached external displays (see “HDMI Audio Configuration” on page C - 9).

Note that Sound Blaster X-Fi MB5 audio will be disabled when you are connecting to an external display through an HDMI or Mini Display port connection.

Design II

Design I

Quick Start Guide

Left View - Model A

1 - 28 Left View - Model A

Left View - Model B

Figure 1 - 19

Left View - Model B

1. Vent/Fan Intake

2. Mini DisplayPort

3. 2 * USB 3.1 Gen 2 (Type C) Port

4. USB 3.0 Port (USB 3.1 Gen 1)

5. 1 * Powered USB

3.0 Port (USB 3.1 Gen 1)



USB 3.1 Gen 2

Port Speed



Powered USB 3.0 Port

HDMI Port / Mini Display Port 1.3

Note that the HDMI Port and Mini Display ports support video and audio signals to attached external displays (see “HDMI Audio Configuration” on page C - 9).

Note that Sound Blaster X-Fi MB5 audio will be disabled when you are connecting to an external display through an HDMI or Mini Display port connection.

2 43 53

Quick Start Guide

Left View - Model B 1 - 29

Figure 1 - 20

Bottom View

Model A - Design I

1. Fan Outlet/Intake



Overheating

To prevent your computer from overheating make sure nothing blocks the vent(s)/ fan intake(s) while the computer is in use.

Bottom Cover Removal

Warning

Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty.

If you need to replace/remove the hard disk/RAM/ optical device etc., for any reason, please contact your distributor/supplier for further information.



Battery Information

Always completely discharge, then fully charge, a new battery before using it. Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges. See “Battery Information” on page 3 - 18 for full instructions.

Quick Start Guide

Bottom View - Model A - Design I

1 - 30 Bottom View - Model A - Design I

Bottom View - Model A - Design II

Figure 1 - 21

Bottom View

Model A - Design II

1. Fan Outlet/Intake



Overheating

To prevent your computer from overheating make sure nothing blocks the vent(s)/ fan intake(s) while the computer is in use.

Bottom Cover Removal

Warning

Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty.

If you need to replace/remove the hard disk/RAM/ optical device etc., for any reason, please contact your distributor/supplier for further information.



Battery Information

Bottom View - Model A - Design II 1 - 31

Quick Start Guide

Figure 1 - 22

Bottom View - Model B

1. Fan Outlet/Intake

2. Subwoofer Speaker



Overheating

To prevent your computer from overheating make sure nothing blocks the vent(s)/ fan intake(s) while the computer is in use.

Bottom Cover Removal

Warning

Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty.

If you need to replace/remove the hard disk/RAM/ optical device etc., for any reason, please contact your distributor/supplier for further information.



Battery Information

Quick Start Guide

Bottom View - Model B

1 - 32 Bottom View - Model B

Quick Start Guide

Desktop



Windows Screens

Note that the Windows screens on the

following pages are included as a basic guide and introduction to navigating around Windows 10.

However note that these screens are always subject to change, upgrade and redesign. Check the Microsoft website for details.

Windows 10 Start Menu

Most of the apps, control panels, utilities and programs within Windows 10 can be accessed from the Start Menu by clicking the icon in the taskbar in the lower left corner of the screen (or by pressing the Windows Logo Key on the keyboard).

Figure 1 - 23 - Windows Start Menu

Windows 10 Start Menu 1 - 33

Right-Click Icon

Quick Start Guide

Right-Clicking the Windows Logo In Start Menu

Right-click the Start Menu icon (or use the Windows Logo Key + X key combination) to bring up an advanced Context Menu of useful features such as Control Panel, Programs and Features, Power Options, Task Manager, Search, File Explorer, Command Prompt, Device Manager and Network Connections etc.

Figure 1 - 24 - Right-Click Windows Logo in Start Menu

1 - 34 Windows 10 Start Menu

Quick Start Guide

Start Menu Apps & Tiles

The Windows 10 Start Menu will contain a number of apps, and many more will be installed as you add more applications etc. Not all of these apps can fit on the screen so may need click and drag the handles at the edge of the screen to expand the menu in order to view all the apps (you can use the scroll bar to mov e up and down the screen).

Figure 1 - 25 - Expanding the Start Menu

Windows 10 Start Menu 1 - 35

Quick Start Guide

Pining/Unpinning Apps & Programs to/from the Start Menu

To make things easy to find you can add and remove tiles for apps and programs to the Start Menu. Right-Click on a program’s icon and select Pin to Start from the drop-down menu. To remove an app or program from the Start Menu right-click the icon and select Unpin from Start. You can use the same method to pin apps/pro- grams to/from the taskbar (select pin to taskbar/unpin this program from the taskbar).

Figure 1 - 26 - Pin to Start/Unpin from Start

1 - 36 Windows 10 Start Menu

Windows 10 Control Panel

• Right-click the Start Menu icon

in the taskbar in the lower left corner of the screen and select Control Panel from the menu.

• Press the Windows logo key

on your keyboard and X to bring up the context menu, and then press P to bring up the Control Panel.

• Type Control Panel into the Search box in the taskbar and click on the icon when it pops up.

In many instances throughout this manual you will see an instruction to open the Control Panel. The Control Panel can be accessed in a number of ways in Windows 10.

Quick Start Guide

Figure 1 - 27 - Windows 10 Control Panel Access

Windows 10 Control Panel 1 - 37

Quick Start Guide

Settings

The Settings item in the Start Menu (and also as an App) gives you quick access to a number of system settings control panels allowing you to adjust settings for System, Devices, Network & internet, Personalization, Accounts, Time & language, Ease of Access, Privacy and Update & security.

Figure 1 - 28 - Settings

1 - 38 Windows 10 Control Panel

Quick Start Guide

Taskbar

Taskbar - Pinned Programs and Apps

Notification Area

Windows 10 Taskbar

In many instances throughout this manual you will see an instruction to access the notification area of the taskbar. The notification area of the taskbar in the bottom right of the screen. Some of the Control Panels and appli-

cations referred to throughout the course of this manual can be accessed from here.

Figure 1 - 29 - Taskbar

You can pin/unpin apps to/from the taskbar in much the same way as you can to the Start screen (see “Pining/

Unpinning Apps & Programs to/from the Start Menu” on page 1 - 36).

Windows 10 Control Panel 1 - 39

1. Attach your display to the app ropriate port, and turn it on.

2. Press the + P key combination.

3. Click on any one of the options from the menu to select PC screen only,

Duplicate, Extend or Second screen only.

4. You can also click Connect to a wireless display at the bottom of the

Project screen and follow the steps to connect to any wireless enabled display.



Intel/NVIDIA Video Driver Controls

More detailed video controls are provided by the Intel/NVIDIA Control Panel (for more detailed information see Appendix C).

You can also access the control panel by right-clicking the desktop and selecting

Graphics Properties/NVIDIA Control Panel (Figure on page 1 - 44).

Quick Start Guide

Video Features

You can switch display devices, and configure display options, from the Display Settings control panel. In Windows 10 it is possible to quickly configure external displays from the Project menu (

key on your keyboard and the P key).

To Configure Displays Using Project

press the Windows logo

1 - 40 Video Features

Figure 1 - 30 - Project (Devices)

Quick Start Guide

Microsoft Hybrid Graphics Or Discrete Graphics Mode

Your computer features a dedicated Discrete Graphics Mode, and a Microsoft Hybrid Graphics Mode featuring switchable graphics technology.

Microsoft Hybrid Graphics Mode - This seamless technology is designed to get best performance from the graphics system while allowing longer battery life, without having to manually change settings. The computer ’s operating system (and some applications) will automatically switch between the integrated GPU and the discrete GPU when required by the applications in use. This switch is seamless to the user (see Appendix C). MSHybrid mode is selected by default. To configure displays in Hybrid mode use the Intel HD Graphics Con-

trol Panel (see page C - 36). Discrete Graphics Mode - Discrete Graphics Mode will use the dedicated Graphics Processing Unit (GPU)

which is more powerful, and therefore more suitable for playing games, watching HD video or running GPUbased applications. To configure displays in Discrete mode use the NVIDIA Control Panel (see page C - 5).

Icon Color Graphics Mode GPU Switch Button (Control Center)

Off MSHYBRID Mode

Green Discrete Mode

Table 1 - 7 - GPU Mode LED Indicator

You can choose either Discrete Mode or MSHybrid mode by selecting the appropriate option from GPU Switch in the Control Center, or in the BIOS (see page B - 8 or page 5 - 9). You will need to restart the system after making changes to the selected graphics mode.

Video Features 1 - 41

Quick Start Guide

To access the Display Settings:

1. You can quickly adjust the display by right-clicking the desktop and selecting Display Settings (Figure 1 -

31).

2. Adjust the settings using the sliders in the menu or click Adv anced display settings (Figure 1 - 31) to change resolution.

3. Click Apply to save any changes made to resolution.

Figure 1 - 31 - Display Settings

1 - 42 Video Features

Quick Start Guide

To access the Intel(R) HD Graphics Control Panel:

1. Right-click the desktop and select Intel(R) Graphics Settings from the menu.

2. Click the icon in the notification area of the Desktop taskbar and select Intel(R) Graphics Settings from the menu.

Figure 1 - 32 - Intel® HD Graphics Control Panel

Video Features 1 - 43

Quick Start Guide

To access the NVIDIA Control Panel:

1. Right-click the desktop and select NVIDIA Control Panel (Figure 1 - 33).

2. Double-click the icon (Figure 1 - 33) in the Windows control panel.

3. To configure displays in Discrete mode use the NVIDIA Control Panel (see page C - 16).

Figure 1 - 33 - NVIDIA Control Panel

1 - 44 Video Features

Power Options

Using the Power Button

1. Go to the Start Menu.

2. Click the Power button .

3. Select the power state required from the menu.

Power Options (Hardware and Sound) can be accessed from the Control Panel. The Power button item in Start Menu (or the context menu) may be used to Shut down or Restart (you can also add Hibernate/Sleep to the menu - see page 1 - 46). To fully control all the power options (including Hibernate mode) go to the Power Options control panel and configure the power button, sleep button and lid to perform the function selected.

Quick Start Guide

Figure 1 - 34 - Shut Down/Restart

Power Options 1 - 45



Adding Hibernate/Sleep to the Power Men

1. Go to the Power Options (Hardware and Sound) control panel.

2. Click Choose what the power buttons do.

3. Click “Change settings that are currently unavailable” .

4. Click to put a check in the Hibernate/Sleep box under Shutdown settings.

5. Click Save Changes and close the control panel.

Quick Start Guide

You can also use the context menu (right-click the Start Menu icon or press the Windows logo + X key combination) to Sign out, Sleep, Hibernate, Shut down, and Restart.

Figure 1 - 35 - Context Menu Shut Down or sign out

Ctrl + Alt + Delete Key Combination You can use the CTRL + ALT + DEL key combination to bring up a full-screen displaying Lock, Sign out, Change a password, Task Manager and Switch User. If you click the Power icon in the lower right corner of the screen a power management option menu appears to display Sleep, Hibernate, Shut down, and Restart.

1 - 46 Power Options

Quick Start Guide

Minimum Screen Resolution Settings

1. Windows 10 has minimum screen resolution requirements.

2. Right-click a blank area of the Desktop and select

3. Adjust the Resolution to make sure that it is at least 1024 * 768, although preferably 1366 * 768 or above.

Display Settings

Power Options 1 - 47

Quick Start Guide

1 - 48

Storage Devices, Mouse, & Audio

Chapter 2: Storage Devices, Mouse, & Audio

Overview

Read this chapter to learn more about the following main features and components of the computer:

• Hard Disk Drive/Solid State Drive

• Multi-in-1 Card Reader

• Audio Features

• Touchpad and Buttons/Mouse

Overview 2 - 1

Storage Devices, Mouse, & Audio



Bottom Cover

Removal Warning

Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may violate the terms of your warranty.

If you need to replace/ remove the hard disk for any reason, please contact your distributor/supplier for further information.

Hard Disk Drive/Solid State Drive

The hard disk drive (HDD) and/or solid state drive (SSD) is used to store your data in the computer. The hard disk can be taken out to accommodate other serial (SATA) hard disk drives (see “Storage” on page D - 2 for specification information), however you will need to contact your distributor/supplier to do this in order to avoid violating the terms of your warranty.

2 - 2 Hard Disk Drive/Solid State Drive

Storage Devices, Mouse, & Audio



Push-Push Card

Reader

The card reader features a push-in/push-out card insertion and ejection mechanism. Simply push the card to insert and eject it, however Ms Duo cards require an adapter.

• MMC (MultiMedia Card) / RSMMC

• SD (Secure Digital) / Mini SD / SDHC / SDXC

*Note: Some of these cards require PC adapters that are usually supplied with the cards.

Multi-in-1 Card Reader

The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s). Make sure you install the Card Reader driver (see “Card Reader” on page 4 - 8).

Multi-in-1 Card Reader 2 - 3

Storage Devices, Mouse, & Audio



Volume Adjustment

The sound volume level can be clicking using the volume control icon in the notification area of the taskbar.

Figure 2 - 1

Realtek Audio

Manager

See “HDMI Audio Configuration” on page C - 9 for a description of the audio configuration when connecting an HDMI supported display device. See “Sound Blaster Audi o & HDMI/Displ ay Port” on pa ge 6 - 53 for more information on the Sound Blaster X-Fi MB-5 Audio setup.

Right-click the icon to access the menu above, and then select Sound Manager.

Audio Features

You can configure the audio options on your computer from the Sound control panel in Windows, or from the Realtek HD Audio Manager icon in the notification area/control panel (right-click the notification area icon to bring up an audio menu and select Sound Manager). The volume may also be adjusted by means of the Fn + F5/F6 key combination (see Table 1 - 6, on page 1 - 22).

2 - 4 Audio Features

Storage Devices, Mouse, & Audio



Volume Adjustment

The sound volume level is set using the volume control within Windows (and the volume function keys on the computer). Click the volume icon in the notification area to check the setting.

Headphone

Configuration

It is recommended that you set the Speaker

Configuration to Stereo (not to 5.1 Speaker)

when listening through headphones in order to maximize audio quality.

Figure 2 - 2

Realtek Audio

Manager - Speakers



Auto Popup Dialog

You should enable the auto popup dialog to automatically detect when a device has been plugged-in. If disabled, double-click connector settings and click the box to enable the auto popup detection of plugged-n devices.

Connector Settings

Setup for 5.1Surround Sound

To setup your system for 5.1 surround sound you will need to connect the audio cables to the 2-In-1Audio, Microphone-In and Line-Out jacks.

1. Click

2. Click Realtek HD Audio Manager (or right-click the notification area icon and

3. Click Speakers (tab) and click Speaker Configuration (tab).

4. Select 5.1 Speaker from the Speaker Configuration pull-down menu.

Start

and make sure you are in select Sound Manager).

, and click

Control Panel

Classic View

(or point to

Settings

and click

Control Panel

)

Audio Features 2 - 5

Storage Devices, Mouse, & Audio

5. Plug in the speaker cables (you may require an adapter to connect each cable to

the appropriate jack e.g a stereo mini to dual RCA adapter) from your speakers into the jacks as follows:

• 2-In-1 Audio Jack (Headphone & S/PDIF Combo) = Side Speaker Out

• Microphone-In Jack = Center/Subwoofer Speaker Out

• Line-Out Jack = Front Speaker Out

6. As you plug in each cable a dialog box will pop u.

7. Click to put a check in the appropriate box according to the speaker plugged-in (e.g. Rear Speaker Out), and then click OK to save the setting.

8. Click OK to exit Realtek HD Audio Manager.

2 - 6 Audio Features

Storage Devices, Mouse, & Audio

Figure 2 - 3

Realtek Audio

Manager -

Recording Setup

Setup for Audio Recording

To record audio sources on your computer at optimum quality follow the instructions below:

1. Click

2. Click Realtek HD Audio Manager (or right-click the notification area icon and

3. Click Microphone Effects (tab) in Microphone (tab), and then click to select

4. Click OK to close the control panel and save the settings.

Control Panel

select Sound Manager). Noise Suppression (button), or adjust th e Recording Volume level to around 60,

to obtain the optimum recording quality.

and make sure you are in

Classic View

Audio Features 2 - 7

Storage Devices, Mouse, & Audio



Auto Pop-Up Dialog

You should enable the auto pop-up dialog to automatically detect when a device has been plugged-in. If disabled, double-click connector settings and click the box to enable the auto pop-up detection of plugged-n devices.

Figure 2 - 4

Pop-Up Menu for

Audio Devices

Setup for Headphones/Speakers - Line-Out Jack

To connect either headphones or speakers to the Line-Out jack follow the instructions below:

1. Plug either the headphones or speakers in to the Line-Out jack.

2. When the pop-up menu appears make sur e you select Line- Out by putting a check in the box alongside it and clicking OK (failure to do so may result in sound coming through the connected same time).

3. To make sure the pop-up menu appears see sidebar.

headphones/speakers

and the internal speakers at the

2 - 8 Audio Features

Storage Devices, Mouse, & Audio



Touchpad Cleaning

In order to improve pad performance it is necessary to keep the surface clean and free of fingerprints and marks etc.

Use a soft dry cleaning cloth to keep the pad surface clean.

Disabling the Pad

Use the Fn + F1 or Control Center button to disable the Touchpad.

Figure 2 - 5

Touchpad

Sensitivity



Mouse Driver

If you are using an external mouse your operating system may be able to auto-configure your mouse during its installation or only enable its basic functions. Be sure to check the device’s user documentation for details.

Touchpad and Buttons/Mouse

The Touchpad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The Touchpad buttons function in much the same way as a two-button mouse. Make sure you have installed the TouchPad driver (see “Touchpad” on page 4 - 8).

Touchpad Sensitivity

The mouse button zones at the bottom of the pad measure about 15mm from the bottom of the pad, and the left and right buttons are divided roughly down the mid-

dle. Press the left button zone for a left click, and right button zone for a right click action.

Touchpad and Buttons/Mouse 2 - 9

Storage Devices, Mouse, & Audio



Disabling the

Touchpad

If you need to disable the Touchpad for any reason (e.g. you may find that when using the computer’s internal keyboard you accidentally trigger the Touchpad when resting your wrists or palms on it) you can do so by using Fn + F1 key combination.

Figure 2 - 6

Mouse Properties

Control Panel -

Buttons

2 - 10 Mouse Properties Control Panel

Mouse Properties Control Panel

You can configure the functions from the Mouse control panel in Windows as follows.

1. Right-click the

2. Select Control Panel.

3. Click Mouse (Hardware and Sound > Devices and Printers).

4. Click the menu headings tabs to adjust your mouse preferences.

Start Menu

icon.

Figure 2 - 7

Mouse Properties

Control Panels

Storage Devices, Mouse, & Audio

Mouse Properties Control Panel 2 - 11

Storage Devices, Mouse, & Audio



Disabling the

Touchpad

Figure 2 - 8

Settings > Mouse &

touchpad

Mouse & Touchpad Devices

You can also configure the functions from the Mouse & touchpad control panel in Devices in the Settings control panel as follows.

1. Click the the Action Center).

2. Click Devices.

3. Click Mouse & touchpad.

Settings

item in the

Start Menu

(this is also as an App or

All Settings

2 - 12 Mouse & Touchpad Devices

Touchpad Settings

Figure 2 - 9

Mouse & Touchpad (

Touchpad turned off

when mouse

connected

)

You can disable the Touchpad by clicking the Touchpad button to turn it off. You can set the system to automatically disable the internal Touchpad when an ex-

ternal USB point device (e.g a USB mouse) is attached. Click “Leave touchpad on when a mouse is connected” to off.

Storage Devices, Mouse, & Audio

Mouse & Touchpad Devices 2 - 13

Storage Devices, Mouse, & Audio

Figure 2 - 10

Mouse & Touchpad

Adjust Delay

Touchapd Taps

Make sure “Allow taps on the touchpad” is on if you want to use the tap feature. The Delay feature helps prevent recognizing taps on the pad by accident, by recog-

nizing when your palm is resting on it or brushing its surface while you are typing. Use the drop-down menu to either turn of any delay, or to adjust the delay to your

preference.

2 - 14 Mouse & Touchpad Devices

You to use a specific gesture or taps on the surface of the pad to perform specific

Figure 2 - 11

Mouse & Touchpad Taps and Gestures

actions to manipulate documents, objects and applications, and these may be enabled or disabled by clicking on the appropriate button.

Storage Devices, Mouse, & Audio

Mouse & Touchpad Devices 2 - 15

Storage Devices, Mouse, & Audio

Figure 2 - 12

Scrolling Gesture

Figure 2 - 13

Zooming Gesture

The two-finger tap acts as a right-click mouse action and can bring up context menus etc.

The two-finger scrolling feature works in most scrollable windows and allows you to scroll horizontally and vertically. Place two fingers, slightly separated, on the Touchpad surface and slide both fingers in the direction required (in a straight continuous motion).

The two-finger pinch to zoom gesture can be used to perform the same function as a scroll wheel in Windows applications that support CTRL + scroll wheel zoom functionality. Place two fingers on the pad (for best results use the tips of the fingers) and slide them apart to zoom in, or closer together to zoom out.

2 - 16 Mouse & Touchpad Devices

Clevo P650HP6, P650HP6-G, P651HP6, P651HP6-G User guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Preface

Chapter 1: Quick Start Guide

Overview

Advanced Users

Beginners and Not-So-Advanced Users

Warning Boxes

Not Included

System Software

System Startup

Model Differences

LCD Panel Open - Model A

LCD Panel Open - Model B

LED Indicators

Illuminated Colored LED Keyboard

Illuminated White LED Keyboard

Keyboard Shortcuts

Control Center

Keyboard Backlight LED

Flexikey® Application

Flexikey® Application Features:

Function Keys & Visual Indicators

Front & Rear Views - Model A

Front & Rear Views - Model B

Right View - Model A

Right View - Model B

Left View - Model A

Left View - Model B

Bottom View - Model A - Design I

Bottom View - Model A - Design II

Bottom View - Model B

Windows 10 Start Menu

Right-Clicking the Windows Logo In Start Menu

Start Menu Apps & Tiles

Windows 10 Control Panel

Settings

Windows 10 Taskbar

Video Features

Microsoft Hybrid Graphics Or Discrete Graphics Mode

Power Options

Chapter 2: Storage Devices, Mouse, & Audio

Overview

Hard Disk Drive/Solid State Drive

Multi-in-1 Card Reader

Audio Features

Setup for 5.1Surround Sound

Setup for Audio Recording

Setup for Headphones/Speakers - Line-Out Jack

Touchpad and Buttons/Mouse

Touchpad Sensitivity

Mouse Properties Control Panel

Mouse & Touchpad Devices