Clevo P640RF Series, P641RF Series Service Manual

Preface
V
Preface
Instructions for Care and Operation
The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
3. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work. Remember to periodically save your data as data may be lost if the battery is depleted.
Do not expose the computer to any shock or vibration.
Do not place it on an unstable surface.
Do not place anything heavy on the computer.
Do not expose it to excessive heat or direct sunlight.
Do not leave it in a place where foreign matter or mois­ture may affect the system.
Don’t use or store the com­puter in a humid environment.
Do not place the computer on any surface which will block the vents.
Do not turn off the power until you properly shut down all programs.
Do not turn off any peripheral devices when the computer is on.
Do not disassemble the com­puter by yourself.
Perform routine maintenance on your computer.
Preface
VI
Preface
4. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong mag­netic fields. These can hinder proper performance and damage your data.
5. Take care when using peripheral devices.
Power Safety
The computer has specific power requirements:
Only use a power adapter approved for use with this computer.
Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply . If you ar e unsure of your local power specifications, consult your service representative or local power company.
The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.
When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.
Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
Before cleaning the computer, make sure it is disconnected from any external power supplies.
Use only approved brands of peripherals.
Unplug the power cord before attaching peripheral devices.
Do not plug in the power cord if you are wet.
Do not use the power cord if it is broken.
Do not place heavy objects on the power cord.
Power Safety
Warning
Before you undertake any upgrade proce­dures, make sure that you have turned off the power, and discon­nected all peripherals and cables (including telephone lines and power cord). It is advis­able to also remove your battery in order to prevent accidentally turning the machine on.
Preface
VII
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.
• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
Battery Guidelines
The following can also apply to any backup batteries you may have.
• If you do not use the battery for an extended period, then remove the battery from the computer for storage.
• Before removing the battery for storage charge it to 60% - 70%.
• Check stored batteries at least every 3 months and charge them to 60% - 70%.
Battery Disposal
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under var­ious state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions.
Battery Level
Click the battery icon in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10% will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.
Preface
VIII
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro­gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the
lid/LCD to a comfortable
viewing angle
(do not exceed 135 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer “on”.
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
135°
Shut Down
Note that you should always shut your computer down by choosing the Shut down command in Windows (see be­low). This will help prevent hard disk or system problems.
1. Click the Start Menu icon .
2. Click the Power item .
3. Choose Shut Down from the menu.
Introduction
1 - 2 Specifications
1.Introduction
Specifications
Latest Specification Information
The specifications listed here are correct at the time of sending them to the press. Certain items (particularly processor types/speeds) may be changed, delayed or updated due to the manu­facturer's release schedule. Check with your service center for more details.
CPU
The CPU is not a user serviceable part. Ac­cessing the CPU in any way may violate your warranty.
Processor Options
i7-6820HK (2.70GHz) 8MB Smart Cache, 14nm, DDR4-2133MHz, TDP 45W i7-6700HQ (2.60GHz) 8MB Smart Cache, 14nm, DDR4-2133MHz, TDP 45W
Support Intel® XTU over-clocking technology on i7-6820HK
Core Logic
Intel® HM170 Express Chipset
BIOS
AMI BIOS (64Mb SPI Flash-ROM)
LCD Options
14.0" (35.56cm), 16:9, FHD (1920x1080)
Storage
One changeable 2.5" (6cm) 7.0mm (h) SATA (Serial) Hard
Disk Drive/Solid State Drive (SSD) (Factory Option) One M.2 SATA/PCIe Gen3 x4 Solid State
Drive (SSD)
CPU Speed & Computer in DC
Mode
Note that when the computer is in DC mode (powered by the battery only) the CPU may not run at full speed. This is a design feature im­plemented in order to protect the battery.
Memory
Two 260 Pin SO-DIMM Sockets Supporting DDR4 2133MHz Memory
Memory Expandable from 4GB (minimum) up to 32GB (maximum)
Video Adapter
Intel® Integrated GPU and NVIDIA® Discrete GPU Supports Microsoft Hybrid Graphics
Supports up to 4 Active Displays
Intel Integrated GPU Intel® HD Graphics 530
Dynamic Frequency Intel Dynamic Video Memory Technology Microsoft DirectX®12 Compatible
NVIDIA® Discrete GPU NVIDIA® GeForce GTX 965M 2GB GDDR5 Video RAM on board
Microsoft DirectX® 12 Compatible
SO-DIMM Memory Types
All SO-DIMM memory modules in­stalled in the system should be iden­tical (the same size and brand) in order to prevent unexpected system behavior.
Do not mix SO-DIMM memory mod­ule sizes and brands otherwise un­expected system problems may occur
.
Introduction
Specifications 1 - 3
1.Introduction
Audio
High Definition Audio Compliant Interface S/PDIF Digital Output Two Speakers Sound Blaster Audio
ANSP 3D sound technology on headphone output
Built-In Array Microphone
Note: External 5.1CH Audio Output Supported by Headphone, Microphone and S/PDIF Out Jacks
Security
Security (Kensington® Type) Lock Slot BIOS Password (Factory Option) TPM 2.0 Intel PTT for Systems Without TPM Hardware
Keyboard
Illuminated White-LED “WinKey” Keyboard (with embed-
ded numeric keypad)
Pointing Device
Built-in Touchpad
Card Reader
Embedded Multi-In-1 Push-Push Card Reader
MMC (MultiMedia Card) / RS MMC SD (Secure Digital) / Mini SD / SDHC/ SDXC
M.2 Slots
Slot 1 for Combo WLAN and Bluetooth Module Slot 2 for SATA or PCIe Gen3 x4 SSD (Factory Option) Slot 3 for 3G/4G Module
Interface
One HDMI-Out Port Two Mini DisplayPorts 1.2* One S/PDIF Out Jack One Headphone/Speaker-Out Jack One Microphone-In Jack One RJ-45 LAN Jack One DC-In Jack
Virtual Reality ready (via Mini DisplayPort 1 ) Three USB 3.0
(USB 3.1 Gen 1) Ports (Including one AC/DC
Powered USB port) One USB 3.1
(Gen 2 - Type C) Port
Communication
Built-In Gigabit Ethernet LAN
2.0M FHD PC Camera Module (Factory Option) M.2 3G/4G Module
WLAN/ Bluetooth M.2 Modules:
(Factory Option) Intel® Wireless-AC 8260 Wireless LAN (802.11ac) + Bluetooth 4.1
(Factory Option) Intel® Wireless-N 7265 Wireless LAN (802.11b/g/n) + Bluetooth 4.0
(Factory Option) Intel® Wireless-AC 3165 Wireless LAN (802.11ac) + Bluetooth 4.0
(Factory Option) Qualcomm® Atheros Killer™ Wireless-AC 1535 Wireless LAN (802.11ac) + Bluetooth 4.1
(Factory Option) Third-Party Wireless LAN 802.11b/g/n + Bluetooth 4.0
Environmental Spec
Temperature
Operating: 5°C - 35°C Non-Operating: -20°C - 60°C
Relative Humidity
Operating: 20% - 80% Non-Operating: 10% - 90%
Power
Embedded 3-Cell Polymer Battery Pack, 45WH Full Range AC/DC Adapter
AC Input: 100 - 240V, 50 - 60Hz DC Output: 19.5V, 7.7A (150W)
Dimensions & Weight
349mm (w) * 247mm (d) * 25.4mm (h)
2.0kg (Barebone with 45WH Battery)
Introduction
1 - 4 External Locator - Top View with LCD Panel Open
1.Introduction
External Locator - Top View with LCD Panel Open
Figure 1
Top View
1. PC Camera
2. *PC Camera LED
*When the PC camera is in use, the LED will be illuminated.
3. Built-In Array Microphone
4. LCD
5. Speakers
6. Power Button
7. Keyboard
8. Touchpad &
Buttons
2 1
8
7
6
5
4
5
33
Loading...
+ 16 hidden pages