Clevo M660JE, M665JE User guide

CLEVO Technical Bulletin

TB No. Issue Date Category Subject
TB7002 2007/04/12 BIOS Change M66N BIOS and H8 resource from Insyde to Phoenix

Cause:

In order to fully support Windows VISTA, it is necessary to change M66N BIOS resource from Insyde to
Phoenix.

Procedures:

1. Unzip attached files to a bootable diskette or USB dongle.

2. Power on system, enter CMOS setup screen, depend on bootable device to change boot up devices priority.

3. Save setting and reboot system, then the BIOS and refresh procedures will start autom atically.

Notice:

1. It is recommend changing BIOS and H8 firmware to Phoenix first version then updating to latest version

firmware.

2. It is possible to cause system can’t boot up problem if you ignore the above procedures and update

Phoenix firmware to latest version directly.