Clevo D900C, D901C Service Manual

Preface

Notebook Computer D900C/D901C

Service Manual

Preface

Notice

The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes.

Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer.

Version 1.0 June 2007

Trademarks

Intel and Intel Core are trademarks/registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation.

Other brand and product names are trademarks and./or registered trademarks of their respective companies.

Preface

III

Preface

About this Manual

This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers.

It is organized to allow you to look up basic information for servicing and/or upgrading components of the D900C/ D901C series notebook PC.

The following information is included:

Chapter 1, Introduction, provides general information about the location of system elements and their specifications. Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system.

Appendix A, Part Lists Appendix B, Schematic Diagrams

Preface

IMPORTANT SAFETY INSTRUCTIONS

Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment:

1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

5. This product is intended to be supplied by a Listed Power Unit (Full Range 220W AC/DC Adapter – AC Input 100 240V, 50 - 60Hz DC Output 20V, 11A).

CAUTION

Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment.

TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER,

TELECOMMUNICATION LINE CORD

This Computer’s Optical Device is a Laser Class 1 Product

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.

2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

3. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work. Remember to periodically save your data as data may be lost if the battery is depleted.

Do not expose the computer to any shock or vibration.

Do not place it on an unstable surface.

Do not place anything heavy on the computer.

Do not expose it to excessive heat or direct sunlight.

Do not leave it in a place where foreign matter or moisture may affect the system.

Don’t use or store the computer in a humid environment.

Do not place the computer on any surface which will block the vents.

Do not turn off the power until you properly shut down all programs.

Do not turn off any peripheral devices when the computer is on.

Do not disassemble the computer by yourself.

Perform routine maintenance on your computer.

Preface

4. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data.

5. Take care when using peripheral devices.

Power Safety

The computer has specific power requirements:

• Only use a power adapter approved for use with this computer.

• Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifications, consult your service representative or local power company.

• The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.

• When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.

• Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.

• Before cleaning the computer, make sure it is disconnected from any external power supplies.

Use only approved brands of peripherals.

Unplug the power cord before attaching peripheral devices.

Do not plug in the power cord if you are wet.

Do not use the power cord if it is broken.

Do not place heavy objects on the power cord.



Power Safety

Warning

Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines). It is advisable to also remove your battery in order to prevent accidentally turning the machine on.

Preface

VII

Preface

Battery Precautions

• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.

• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.

• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel.

• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded.

• Keep the battery away from metal appliances.

• Affix tape to the battery contacts before disposing of the battery.

• Do not touch the battery contacts with your hands or metal objects.



Battery Disposal

The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.

Caution

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions.

Preface

VIII

Preface

Related Documents

You may also need to consult the following manual for additional information:

User’s Manual on CD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program. It also describes the installation and operation of the utility programs provided with the notebook PC.

Preface

Contents

Introduction ..............................................1-1

Overview .........................................................................................1-1

System Specifications .....................................................................1-2

External Locator - Top View with LCD Panel Open ...................... 1-6

External Locator - Front & Rear Views ......................................... 1-7

External Locator - Left & Right Side View .................................... 1-8

External Locator - Bottom View .....................................................1-9

Mainboard Overview - Top (Key Parts) .......................................1-10

Mainboard Overview - Bottom (Key Parts) ..................................1-11

Mainboard Overview - Top (Connectors) .....................................1-12

Mainboard Overview - Bottom (Connectors) ...............................1-13

Disassembly ...............................................2-1

Overview .........................................................................................2-1

Maintenance Tools .......................................................................... 2-2

Connections .....................................................................................2-2

Maintenance Precautions .................................................................2-3

Disassembly Steps ........................................................................... 2-4

Removing the Battery ......................................................................2-5

Removing the Optical (CD/DVD) Device ......................................2-6

Removing the Hard Disk Drive ....................................................... 2-7

Removing the System Memory (RAM) .......................................... 2-9

Removing the Processor ................................................................ 2-11

Removing the VGA Card ..............................................................2-12

Installing the VGA Card ...............................................................2-14

Removing the Keyboard ................................................................2-15

Removing the Wireless LAN Module ........................................... 2-16

Removing the Bluetooth Module .................................................. 2-17

Removing the Modem ...................................................................2-18

Removing the TV Tuner Card ....................................................... 2-19

Part Lists ..................................................A-1

Part List Illustration Location ........................................................ A-2

TOP (D900C/D901C) .................................................................... A-3

BOTTOM (D900C/D901C) ........................................................... A-4

LCD (D900C/D901C) ................................................................... A-5

MB - One VGA only (D900C/D901C) ......................................... A-6

MB (D900C/D901C) ..................................................................... A-7

HDD (D900C/D901C) ................................................................... A-8

2nd HDD (D900C/D901C) ............................................................ A-9

COMBO (D900C/D901C) ........................................................... A-10

DVD-DUAL RW (D900C/D901C) ............................................. A-11

Schematic Diagrams................................. B-1

BLOCK DIAGRAM .......................................................................B-2

CLOCK GENERATOR ..................................................................B-3

CPU-1 .............................................................................................B-4

CPU-2 ............................................................................................B-5

Intel P965 CPU Interface 1/4 ..........................................................B-6

Intel P965 PCI- E I/F 2/4 ................................................................B-7

Intel P965 Memory I/F 3/4 .............................................................B-8

DDRII SODIMM ............................................................................B-9

Intel P965 Power 4/4 ....................................................................B-10

ICH8 PCI, DMI, CPU, IRQ ..........................................................B-11

ICH8 LPC, ATA, USB, GPIO ......................................................B-12

ICH8 Power ..................................................................................B-13

MXM PCI-E CON1 ......................................................................B-14

MXM PCI-E CON2 ......................................................................B-15

BR03 PCI-E & Straps 1/3 .............................................................B-16

BR03 PCI-E Interface 2/3 .............................................................B-17

BR03 Power & GND 3/3 ..............................................................B-18

Preface

DVI/ CRT ..................................................................................... B-19

Panel CON/ LED Indicator ..........................................................B-20

1394/ Card Reader (TI PCI7402) ................................................. B-21

GLAN RTL8111B ........................................................................ B-22

Audio ALC888/ Amplifier ........................................................... B-23

KBC-H8/2111 .............................................................................. B-24

JM368 PCIE to PATA .................................................................. B-25

Mini Card & TV Out/ Video In .................................................... B-26

Daughter Connection .................................................................... B-27

CCD/ BT/ FAN/ ROM ................................................................. B-28

Mini PCI/ MDC/ New Card ......................................................... B-29

AC-In, Charger ............................................................................. B-30

Power 1.2V/ 1.25V ....................................................................... B-31

Power 1.5V/ 1.05V/ 2.5V ............................................................. B-32

Power 1.8V/ 0.9V/ 12V ................................................................ B-33

Power 3.3V/ 5V ............................................................................ B-34

VCore Power ................................................................................ B-35

Audio Board ................................................................................. B-36

Card Reader Board ....................................................................... B-37

Click Board .................................................................................. B-38

HotKey Board .............................................................................. B-39

Switch Board ................................................................................ B-40

USB Board ................................................................................... B-41

Introduction

Overview 1 - 1

1.Introduction

1: Introduction

Overview

This manual covers the information you need to service or upgrade the D900C/D901C series notebook computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about drivers (e.g. VGA & audio) is also found in User’s Manual. That manual is shipped with the computer.

Operating systems (e.g. Windows XP, Windows Vista, etc.) have their own manuals as do application software (e.g. word processing and database programs). If you have questions about those programs, you should consult those manuals.

The D900C/D901C series notebook is designed to be upgradeable. See “Disassembly” on page 2 - 1 for a detailed de- scription of the upgrade procedures for each specific component. Please note the warning and safety information indicated by the “” symbol.

The balance of this chapter reviews the computer’s technical specifications and features.

Introduction

1 - 2 System Specifications

1.Introduction

System Specifications

Feature Specification

Processor Types Intel® Core™ 2 Duo Processor

LGA775 Package (775-pin) E6300/ E6400

65nm (65 Nanometer) Process Technology 2MB On-die L2 Cache & 1066MHz FSB

1.86/ 2.13 GHz

Intel® Core™ 2 Duo Processor LGA775 Package (775-pin) E6600/ E6700

65nm (65 Nanometer) Process Technology 4MB On-die L2 Cache & 1066MHz FSB

2.40/ 2.66 GHz

Intel® Core™ 2 Extreme Processor LGA775 Package (775-pin) X6800

65nm (65 Nanometer) Process Technology 4MB On-die L2 Cache & 1066MHz FSB

2.93 GHz

Core Logic Intel P965 + ICH8-R

LCD 17" Glare Type Flat Panel TFT (For One of the Following Options)

WXGA (1440 * 900) OR WSXGA+ (1680 * 1050) OR WUXGA (1920 * 1200)

Security Security (Kensington® Type) Lock Slot BIOS Password

TPM Supported

Memory Two 200 Pin SO-DIMM Sockets Supporting DDRII (DDR2) 533/667/800 MHz

64-bit Wide DDRII (DDR2) Data Channels Memory Expandable up to 4GB (512/ 1024/ 2048 MB DDRII Modules) (Note: Do Not Use Other Module Types)

BIOS One 16Mbit Flash ROM Phoenix BIOS

Introduction

System Specifications 1 - 3

1.Introduction

Video Card NVIDIA GeForceGo 7950 GTX (G71GM-UU +MXM IV)

SLI Module

PCI-Express Video Card

Storage Options One Changeable 12.7 mm (h) Optical Device Drive Bay (see“Optional” on page 1 - 5)

Up to Three Changeable 9.5 mm (h) SATA II Hard Disk Drives

Supports RAID 0, RAID 1, RAID 5 HDD Fault Tolerance System

(Optional) External USB 1.44MB Floppy Disk Drive

Card Reader Embedded 7-in-1 Card Reader (MS/ MS Pro/ SD/ Mini SD/ MMC/ RS MMC/ MS Duo)

Note: MS Duo/ Mini SD/ RS MMC Cards Require a PC Adapter

Audio UAA (Universal Audio Architecture)

Integrated Azalia Compliant Interface

S/PDIF Digital Output Built-In Microphone 4 * Built-In Speakers

Keyboard & Pointing Device

Full Size Winkey Keyboard with Numeric Keypad Two Game Hot Keys

Built-In TouchPad (Scroll Functionality Included)

ExpressCard Slot ExpressCard/34/54 Slot

Feature Specification



Windows Vista SLI Support

At the time of going to press Windows Vista did not support more than one SLI video card. Check with your service center for the latest information.



Video Card Options

Note that card types, specifications and drivers are subject to continual updates and changes. Check with your service center for the latest details on video cards supported.

Introduction

1 - 4 System Specifications

1.Introduction

I/O Ports Four USB 2.0 Ports

One Mini-IEEE1394 Port One S-Video-Out Jack for TV & HDTV Output One DVI-Out Port (with DVI-Dual Link Support) One External Monitor Port One Headphone/Speaker-Out Jack One Microphone-In Jack One S/PDIF Out Jack One Line-In Jack for Audio Input

One RJ-11 Modem Jack One RJ-45 Gigabit LAN Jack One DC-In Jack

One CATV Antenna (Analog/Digital) Jack (Functions with Optional TV Tuner Module) One S-Video-In Jack (Functions with Optional TV Tuner Module) One Consumer Infrared Transceiver (Functions with Optional TV Tuner Module)

Communication AZALIA MDC 56K Modem (V.90 & V.92 Compliant)

1GB PCIe Fast Ethernet LAN Module

Intel PRO/Wireless 3945ABG PCIe Wireless LAN Module (Option)

Intel PRO/Wireless 4965AGN PCIe Wireless LAN Module (Option)

USB 2.0 Bluetooth Class II Module (Option)

1.3M Pixel USB 2.0 PC Camera Module (Factory

Option)

Operating Systems Supported

Windows XP SP2 Windows Vista 64bit

Home Premium/ Business/ Enterprise/ Ultimate

Power Management

Supports ACPI 2.0 Battery Low Suspend Supports Resume from Modem Ring

Supports Suspend to RAM (S3) Supports Suspend to Disk (S4)

Power

Full Range 220W AC/DC Adapter – AC Input 100 - 240V, 50 - 60Hz, DC Output 20V, 11A

Easy Changeable 12-Cell Smart Lithium-Ion 6600mAH

Environmental Spec

Temperature

Operating: 5°C ~ 35°C Non-Operating: -20°C ~ 60°C

Relative Humidity

Operating: 20% ~ 80% Non-Operating: 10% ~ 90%

Feature Specification

Introduction

System Specifications 1 - 5

1.Introduction

Physical Dimensions & Weight

397mm (w) * 298mm (d) * 51 ~ 60mm (h) 5.4kg

Optional Optical Drive Module Options:

DVD-Super Multi Drive Module

External USB 1.44MB Floppy Disk Drive

Analog TV Tuner Module with Mini-PCI Interface OR Hybrid TV Tuner Module with Mini-PCI Interface

Intel PRO/Wireless 3945ABG PCIe Wireless LAN Module OR Intel PRO/Wireless 4965AGN PCIe Wireless LAN Module

USB 2.0 Bluetooth Class II Module

1.3M Pixel USB 2.0 PC Camera Module (Factory Option)

DVD Player Software

Feature Specification

Introduction

1 - 6 External Locator - Top View with LCD Panel Open

1.Introduction

External Locator - Top View with LCD Panel Open

Figure 1

Top View

1. Optional Built-In PC Camera

2. LCD

3. LED Power & Communication Indicators

4. Built-In Microphone

5. LED Status Indicators

6. Hot Key Buttons

7. Power Button

8. Keyboard

9. Speakers

10. Game Hot Keys

11. TouchPad and Buttons

Introduction

External Locator - Front & Rear Views 1 - 7

1.Introduction

External Locator - Front & Rear Views

Figure 2

Front Views

1. LCD Latches

2. Line-In Jack

3. S/PDIF-Out Jack

4. Microphone-In Jack

5. Headphone-Out Jack

6. Speakers

Figure 3

Rear Views

1. Vent/Fan Intake

2. DC-In Jack

3. DVI-Out Port

4. S-Video-In Jack

*Enabled with Optional Mini-

PCI TV Tuner Only

3 4

Introduction

1 - 8 External Locator - Left & Right Side View

1.Introduction

External Locator - Left & Right Side View

524

Figure 4

Left Side View

1. External Monitor Port

2. S-Video-Out Jack

3. Cable (CATV) Antenna Jack

4. RJ-11 Phone Jack

5. RJ-45 LAN Jack

6. Mini-IEEE 1394 Port

7. Express Card Slot

8. Optical Device Drive Bay (for CD/ DVD Device)

9. 7-in-1 Card Reader

1 1

Figure 5

Right Side View

1. USB Ports

2. Security Lock Slot

Introduction

External Locator - Bottom View 1 - 9

1.Introduction

External Locator - Bottom View

Figure 6

Bottom View

1. Battery (Secondary HDD Bay - HDD3)

2. Fan Outlet/Intake

3. Primary HDD Bay (HDD1 & HDD2)

4. Component Bay Cover



Overheating

To prevent your computer from overheating make sure nothing blocks the vent/fan intakes while the computer is in use.

Introduction

1 - 10 Mainboard Overview - Top (Key Parts)

1.Introduction

Mainboard Overview - Top (Key Parts)

Figure 7

Mainboard Top

Key Parts

1. WLAN Module Socket

2. TV Module Socket

3. SLI Chip (BR03)

4. Northbridge (P965)

5. Southbridge (ICH8R)

Introduction

Mainboard Overview - Bottom (Key Parts) 1 - 11

1.Introduction

Mainboard Overview - Bottom (Key Parts)

Figure 8

Mainboard Bottom

Key Parts

1. CPU Socket (no CPU installed)

2. VGA sockets

3. Memory Slots DDR So-DIMM

4. HDD Socket

5. KBC IC (H8S/ 2111BV)

6. Audio Codec IC (ALC883)

7. IEEE1394/Card Reader IC (PCI7402)

Introduction

1 - 12 Mainboard Overview - Top (Connectors)

1.Introduction

Mainboard Overview - Top (Connectors)

Figure 9

Mainboard Top

Connectors

1. CCD Cable Connector

2. LCD Connector

3. LED Connector

4. Wire Cable 2Pin Connector (M/B to MDC Module)

5. SPK 1 Connector

6. Bluetooth Module Connector

7. MDC Module Connector

8. AP-Key Cable Connector

9. Touch Pad Connector

10. SW1 Connector

11. SPK 2 Connector

12. Keyboard Cable Connector

13. USB Cable Connector

14. Audio Cable Connector

15. RTC Battery Connector

16. SPK Sub Cable Connector

17. Card Reader Board Connector

15 1416

Introduction

Mainboard Overview - Bottom (Connectors) 1 - 13

1.Introduction

Mainboard Overview - Bottom (Connectors)

Figure 10

Mainboard Bottom

Connectors

1. CPU Fan Cable Connector

2. RAM Fan Cable Connector

3. DC-In Jack

4. DVI-Out Port

5. S-Video-In Jack

6. Serial Port

7. S-Video-Out Jack

8. CATV Jack*

9. RJ-11 Phone Jack

10. RJ-45 LAN Jack

11. 1394a Connector

12. VGA Fan Cable Connector

13. Optical Device Connector

14. Battery Connector

Introduction

1-14

1.Introduction

Disassembly

Overview 2 - 1

2.Disassembly

2: Disassembly

Overview

This chapter provides step-by-step instructions for disassembling the D900C/D901C series notebook’s parts and subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).

We suggest you completely review any procedure before you take the computer apart.

Procedures such as upgrading/replacing the RAM, CD device and hard disk are included in the User’s Manual but are repeated here for your convenience.

To make the disassembly process easier each section may have a box in the page margin. Information contained under the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a



lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the dis- assembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previous disassembly procedure. The amount of screws you should be left with will be listed here also.

A box with a  will also provide any possible helpful information. A box with a  contains warnings.

An example of these types of boxes are shown in the sidebar.



Information



Warning

Disassembly

2-2Overview

2.Disassembly

NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the battery is removed too).

Maintenance Tools

The following tools are recommended when working on the notebook PC:

• M3 Philips-head screwdriver

• M2.5 Philips-head screwdriver (magnetized)

• M2 Philips-head screwdriver

• Small flat-head screwdriver

• Pair of needle-nose pliers

• Anti-static wrist-strap

Connections

Connections within the computer are one of four types:

Locking collar sockets for ribbon connectors To release these connectors, use a small flat-head screwdriver to

gently pry the locking collar away from its base. When replacing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.

Pressure sockets for multi-wire connectors To release this connector type, grasp it at its head and gently

rock it from side to side as you pull it out. Do not pull on the wires themselves. When replacing the connection, do not try to force it. The socket only fits one way.

Pressure sockets for ribbon connectors To release these connectors, use a small pair of needle-nose pli-

ers to gently lift the connector away from its socket. When replacing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.

Board-to-board or multi-pin sockets To separate the boards, gently rock them from side to side as

you pull them apart. If the connection is very tight, use a small flat-head screwdriver - use just enough force to start.

Disassembly

Overview 2 - 3

2.Disassembly

Maintenance Precautions

The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a removal and/or replacement job, take the following precautions:

1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged.

2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight.

3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong mag- netic fields. These can hinder proper performance and damage components and/or data. You should also monitor the position of magnetized tools (i.e. screwdrivers).

4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

5. Be careful with power. Avoid accidental shocks, discharges or explosions.

•Before removing or servicing any part from the computer, turn the computer off and detach any power supplies.

•When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire.

6. Peripherals – Turn off and detach any peripherals.

7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. Before handling any part in the computer, discharge any static electricity inside the computer. When handling a printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that you use an anti-static wrist strap instead.

8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands pro- duce oils which can attract corrosive elements.

9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted to charged surfaces, reducing performance.

10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as screws, loose inside the computer.

Cleaning

Do not apply cleaner directly to the computer, use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.



Power Safety

Warning

Disassembly

2 - 4 Disassembly Steps

2.Disassembly

Disassembly Steps

The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED.

To remove the Battery: