Clevo D4F User Manual
I
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or
inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage
resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated,
transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer
or creators of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered
trademarks of their respective companies. They are mentioned for identification purposes only and are not
intended as an endorsement of that product or its manufacturer.
© July 2004
Trademarks
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home or other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Intel and Pentium are registered trademarks of Intel Corporation.
II
Preface
FCC Statement
(Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the service representative or an experienced radio/TV technician for help.
Warning
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the manufacturer for compliance with the above standards could void your authority to operate the equipment.
III
Preface
IMPORTANT SAFETY INSTRUCTIONS
Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and
injury to persons when using any electrical equipment:
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement or near a swimming pool.
2. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They
may explode. Check with local codes for possible special disposal instructions.
5. This product is intended to be supplied by a Listed Power Unit.
CAUTION
Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment.
TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER,
TELECOMMUNICATION LINE CORD
IV
Preface
Instructions for Care and Operation
The computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be
damaged.
2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of
heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer
could be badly damaged.
Do not expose the computer
to any shock or vibration.
Do not place it on an unstable
surface.
Do not place anything heavy
on the computer.
Do not expose it to excessive
heat or direct sunlight.
Do not leave it in a place
where foreign matter or moisture may affect the system.
Don’t use or store the computer in a humid environment.
Do not place the computer on
any surface which will block
the vents.
V
Preface
3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and
other strong magnetic fields. These can hinder proper performance and damage your data.
4. Follow the proper working procedures for the computer. Shut the computer down properly and
don’t forget to save your work. Remember to periodically save your data as data may be lost if the
battery is depleted.
5. Take care when using peripheral devices.
Do not turn off the power
until you properly shut down
all programs.
Do not turn off any peripheral
devices when the computer is
on.
Do not disassemble the computer by yourself.
Perform routine maintenance
on your computer.
Use only approved brands of
peripherals.
Unplug the power cord before
attaching peripheral devices.
VI
Preface
Power Safety
The computer has specific power requirements:
• Only use a power adapter approved for use with this computer.
• Your AC adapter may be designed for international travel but it still requires a
steady, uninterrupted power supply. If you are unsure of your local power specifications, consult your service representative or local power company.
• The power adapter may have either a 2-prong or a 3-prong grounded plug. The
third prong is an important safety feature; do not defeat its purpose. If you do not
have access to a compatible outlet, have a qualified electrician install one.
• When you want to unplug the power cord, be sure to disconnect it by the plug head,
not by its wire.
• Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
• Before cleaning the computer, make sure it is disconnected from any external
power supplies.
Do not plug in the power
cord if you are wet.
Do not use the power cord if
it is broken.
Do not place heavy objects
on the power cord.
Power Safety
Warning
Before you undertake
any upgrade procedures, make sure that
you have turned off the
power, and disconnected all peripherals
and cables (including
telephone lines). It is
advisable to also remove your battery in
order to prevent accidentally turning the
machine on.
VII
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any
way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage,
which may possibly result in fire.
• Recharge the batteries using the computer’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative
or qualified service personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully.
Batteries may explode or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
Battery Disposal & Caution
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its
useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste
stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended
by the manufacturer. Discard used battery according to the manufacturer’s instructions.
VIII
Preface
Cleaning
Do not apply cleaner directly to the computer, use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
Servicing
Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and
the computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer
from the power supply. Then refer servicing to qualified service personnel under any of the following conditions:
• When the power cord or AC/DC adapter is damaged or frayed.
• If the computer has been exposed to rain or other liquids.
• If the computer does not work normally when you follow the operating instructions.
• If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks).
• If there is an unusual odor, heat or smoke coming from your computer.
Removal Warning
When removing any cover(s) and screw(s) for the purposes of device upgrade, remember to replace the cover(s)
and screw(s) before turning the machine on.
IX
Preface
Travel Considerations
Packing
As you get ready for your trip, run through this list to make sure the system is ready to go:
1. Check that the battery pack and any spares are fully charged.
2. Power off the computer and peripherals.
3. Close the display panel and make sure it’s latched.
4. Disconnect the AC adapter and cables. Stow them in the carrying bag.
5. The AC adapter uses voltages from 100 to 240 volts so you won’t need a second voltage adapter.
However, check with your travel agent to see if you need any socket adapters.
6. Put the computer in its carrying bag and secure it with the bag’s straps.
7. If you’re taking any peripherals (e.g. a printer, mouse or digital camera), pack them and those
devices’ adapters and/or cables.
8. Anticipate customs - Some jurisdictions may have import restrictions or require proof of ownership
for both hardware and software. Make sure your “papers” are handy.
Power Off Before Traveling
Make sure that your computer is completely powered off before putting it into a travel bag (or any such container).
Putting a computer which is powered on in a travel bag may cause the vents/intakes to be blocked. To prevent
your computer from overheating make sure nothing blocks the vent/fan intake while the computer is in use.
X
Preface
On the Road
In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind:
Hand-carry the computer - For security, don’t let it out of your sight. In some areas, computer theft is
very common. Don’t check it with “normal” luggage. Baggage handlers may not be sufficiently careful.
Avoid knocking the computer against hard objects.
Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the
computer, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your
computer and disks around the devices. Ask security officials to hand-inspect them (you may be asked to
turn it on). Note: Some airports also scan luggage with these devices.
Fly safely - Most airlines have regulations about the use of computers and other electronic devices in
flight. These restrictions are for your safety, follow them. If you stow the computer in an overhead compartment, make sure it’s secure. Contents may shift and/or fall out when the compartment is opened.
Get power where you can - If an electrical outlet is available, use the AC adapter and keep your battery(ies) charged.
Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the
computer. Wait a few minutes before turning it on so that any moisture can evaporate.
XI
Preface
Developing Good Work Habits
Developing good work habits is important if you need to work in front of the computer for long periods
of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your
hands, wrists or other joints. The following are some tips to reduce the strain:
• Adjust the height of the chair and/or desk so that the keyboard is at or slightly
below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed
position.
• Your knees should be slightly higher than your hips. Place your feet flat on the
floor or on a footrest if necessary.
• Use a chair with a back and adjust it to support your lower back comfortably.
• Sit straight so that your knees, hips and elbows form approximately 90-degree
angles when you are working.
• Take periodic breaks if you are using the computer for long periods of time.
Remember to:
• Alter your posture frequently.
• Stretch and exercise your body several times a day.
• Take periodic breaks when you work at the computer for long periods of time. Frequent and short breaks are better than fewer and longer breaks.
XII
Preface
Lighting
Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your
neck and shoulders.
• Position the display to avoid glare or reflections from overhead lighting or outside sources of light.
• Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen
clearly.
• Position the display directly in front of you at a comfortable viewing distance.
• Adjust the display viewing angle to find the best position.
XIII
Preface
Contents
Notice ...........................................................................I
Trademarks ..........................................................I
FCC Statement ...................................................II
Instructions for Care and Operation ................. IV
Power Safety .....................................................VI
Battery Precautions ..........................................VII
Cleaning ........................................................ VIII
Servicing ........................................................ VIII
Travel Considerations .......................................IX
Introduction
Overview ..................................................................1-1
Advanced Users .....................................................1-1
Beginners and Not-So-Advanced Users .................1-1
Warning Boxes .......................................................1-2
Not Included ...........................................................1-2
System Software .....................................................1-2
Quick Start Guide .....................................................1-3
System Map ..............................................................1-4
Getting to Know Your Computer ...........................1-4
Model Differences ..................................................1-4
Top View ..................................................................1-5
Top View with LCD Panel Open ...........................1-6
PC Camera ............................................................ 1-7
LCD Panel ............................................................ 1-7
Microphone ........................................................... 1-7
LED Power & Communication Indicators ........... 1-7
LED Status Indicators ........................................... 1-7
Hot-Key Buttons ................................................... 1-8
Close Cover Switch .............................................. 1-8
Power Button ........................................................ 1-8
Keyboard .............................................................. 1-9
TouchPad & Buttons ............................................ 1-9
Front View ............................................................. 1-10
Mini-IEEE 1394 Port .......................................... 1-11
S/PDIF Out Port ................................................. 1-11
Microphone-In Jack ............................................ 1-11
Headphone-Out Jack .......................................... 1-11
Infrared Transceiver ........................................... 1-11
Wireless Module ON/OFF Switch ..................... 1-12
Stereo Speakers .................................................. 1-12
Left Side View ....................................................... 1-13
Optical Device Bay ............................................. 1-13
7-in-1 Card Reader ............................................. 1-14
PC Card Slot ....................................................... 1-14
Right Side View ..................................................... 1-15
Security Lock Slot .............................................. 1-15
Rear View .............................................................. 1-16
XIV
Preface
Vent .....................................................................1-16
DC-In Jack ..........................................................1-16
2 USB 2.0 Ports ...................................................1-17
External Monitor (VGA) Port .............................1-17
Printer/Parallel Port .............................................1-17
Serial Port ............................................................1-17
S-Video Out Port .................................................1-18
PS/2 Type Port ....................................................1-18
RJ-11 Phone Jack ................................................1-18
RJ-45 LAN Jack ..................................................1-18
Bottom View ..........................................................1-19
Vent .....................................................................1-19
Battery .................................................................1-19
Hard Disk Drive ..................................................1-20
Using The Computer
Overview ..................................................................2-1
The Power Sources ...................................................2-2
AC Adapter ............................................................2-2
Battery ....................................................................2-2
Recharging the Battery with the AC Adapter ........2-3
Proper handling of the Battery Pack .....................2-3
Turning on the Computer .........................................2-4
LED Indicators .........................................................2-5
LED Status Indicators ............................................2-5
LED Power & Communication Indicators ............ 2-6
Auto Mail Checker ................................................... 2-7
Special Group ....................................................... 2-9
Hard Disk Drive ..................................................... 2-10
Optical Device Bay ................................................ 2-11
Loading Discs ...................................................... 2-11
Handling CDs or DVDs ....................................... 2-12
DVD Regional Codes .......................................... 2-13
Changing DVD Regional Codes ........................ 2-14
PC Card Slot .......................................................... 2-15
Inserting and Removing PC Cards ...................... 2-15
7-in-1 Card Reader Module ................................... 2-16
Hot-Key Buttons .................................................... 2-17
Programming the Hot-Key Buttons ..................... 2-17
Function Keys & Numeric Keypad ....................... 2-19
Function Keys ..................................................... 2-19
Numeric Keypad ................................................. 2-20
TouchPad & Buttons/Mouse .................................. 2-21
Configuring the TouchPad and Buttons ............. 2-21
Adding a Printer ..................................................... 2-23
USB Printer .......................................................... 2-23
Install Instructions: ............................................. 2-23
Parallel Printer ..................................................... 2-24
Install Instructions: ............................................. 2-24
XV
Preface
Advanced Controls
Overview ..................................................................3-1
Advanced Video Controls ........................................3-2
Opening the LCD ...................................................3-2
Video Driver Controls ..............................................3-3
Making Adjustments for the Display .....................3-4
SiS Utility Tray/Manager .......................................3-6
Video Memory .........................................................3-8
Display Devices & Options ......................................3-9
Switching/Enabling Displays (Keyboard) ............3-10
Switching/Enabling Displays (Driver) .................3-11
Mirror Display .....................................................3-12
Extended Windows Desktop Display .................3-13
Adjusting Monitor Settings ....................................3-15
TV Display .............................................................3-19
TV System ............................................................3-19
Power Management Features .................................3-20
Advanced Configuration and Power Interface .....3-20
Enabling Power Options .........................................3-21
Power Schemes ....................................................3-22
Conserving Power (System) .................................3-24
Hibernate Mode vs. Shutdown .............................3-24
Standby Mode vs. Hibernate Mode ......................3-24
Standby ................................................................3-25
Hibernate ............................................................ 3-25
Configuring the Power Button ............................. 3-26
Battery Information ................................................ 3-27
New Battery ........................................................ 3-27
Battery Life ......................................................... 3-27
Battery FAQ ........................................................ 3-28
Configuring the Infrared Settings for FIR ............. 3-29
Drivers & Utilities
Overview .................................................................. 4-1
What to Install .......................................................... 4-1
Optional Module Drivers ...................................... 4-2
Installation Prerequisite ........................................ 4-2
Windows XP & 2000 Service Packs ..................... 4-3
Driver Installation .................................................... 4-4
Notebook Driver Installation Program ................. 4-4
Manual Driver Installation ................................... 4-5
Authorized Driver Message ................................... 4-6
Version Conflict Message ..................................... 4-6
Windows 2000 Professional .................................... 4-7
New Hardware Found ............................................ 4-7
Audio (Win2000) ................................................... 4-8
Modem (Win2000) ................................................ 4-8
LAN (Win2000) .................................................... 4-9
Video (Win2000) ................................................... 4-9
XVI
Preface
Hot-Key (Win2000) ...............................................4-9
TouchPad (Win2000) ...........................................4-10
PC Card/PCMCIA (Win2000) .............................4-10
PC Camera (Win2000) .........................................4-10
Wireless LAN (Win2000) ....................................4-10
Bluetooth (Win2000) ...........................................4-10
Auto Mail (Win2000) ...........................................4-11
Windows XP ..........................................................4-12
New Hardware Found ..........................................4-12
Audio (WinXP) ....................................................4-13
Modem (WinXP) ..................................................4-14
LAN (WinXP) ......................................................4-14
Video (WinXP) ....................................................4-14
Hot-Key (WinXP) ................................................4-15
TouchPad (WinXP) ..............................................4-15
PC Card/PCMCIA (WinXP) ................................4-16
PC Camera (WinXP) ............................................4-16
Wireless LAN (WinXP) .......................................4-16
Bluetooth (WinXP) ..............................................4-16
Auto Mail (WinXP) ..............................................4-16
BIOS Utilities
Overview ..................................................................5-1
Important BIOS Settings ..........................................5-2
The Power-On Self Test (POST) .............................5-3
Failing the POST ................................................... 5-4
Fatal Errors ........................................................... 5-4
Non-Fatal Errors ................................................... 5-4
The Setup Program .................................................. 5-5
Entering Setup ....................................................... 5-5
Setup Screens ......................................................... 5-6
Main Menu ............................................................... 5-7
Advanced Menu ....................................................... 5-9
Configuring the Network Boot Protocol ............. 5-14
Security Menu ........................................................ 5-15
Boot Menu ............................................................. 5-17
Exit Menu .............................................................. 5-19
Upgrading The Computer
Overview .................................................................. 6-1
When Not to Upgrade ............................................ 6-2
Removing the Battery .............................................. 6-3
Upgrading the Hard Disk Drive ............................... 6-4
Upgrading the System Memory (RAM) .................. 6-6
Upgrading the Device in the Optical Device Bay .. 6-10
Upgrading the Processor ........................................ 6-12
Optional Modules
Overview .................................................................. 7-1
Wireless LAN & Bluetooth Modules ...................... 7-2
XVII
Preface
Wireless LAN Driver Installation (Win2000) ........7-3
Wireless LAN Driver Installation (WinXP) ..........7-4
Bluetooth Driver Installation (Win2000) ............... 7-5
Bluetooth Driver Audio Setup (Win2000) .............7-6
Bluetooth Driver Installation (WinXP) ..................7-7
Control Panel Options (Bluetooth) .........................7-8
PC Camera ..............................................................7-10
PC Camera Driver Installation (Win2000) ..........7-10
PC Camera Driver Installation (WinXP) .............7-11
Audio Setup .........................................................7-11
AMCAP ..............................................................7-13
Troubleshooting
Overview ..................................................................8-1
Basic Hints and Tips ................................................8-2
Backup and General Maintenance ............................8-3
Viruses ......................................................................8-4
Upgrading and Adding New Hardware/Software .... 8-5
Power ........................................................................8-7
Display .....................................................................8-9
Boot Password ........................................................8-10
Audio ......................................................................8-11
Optical Device ........................................................8-12
Keyboard ................................................................8-13
Operation ................................................................8-14
Wireless LAN & Bluetooth Modules .................... 8-15
OS and Driver Installation ..................................... 8-16
Hyper-Threading Notes ......................................... 8-17
Specifications
Processor Types .................................................. A-1
Core Logic .......................................................... A-2
Security ............................................................... A-3
Memory ............................................................... A-3
BIOS ................................................................... A-3
LCD Options ....................................................... A-3
Display ................................................................ A-3
Storage Devices .................................................. A-3
PC Card ............................................................... A-4
Keyboard ............................................................. A-4
Pointing Device ................................................... A-4
Audio ................................................................... A-4
Interface .............................................................. A-4
Communication ................................................... A-5
Power Management ............................................ A-5
Power .................................................................. A-5
Indicator .............................................................. A-5
Environmental Spec ............................................ A-5
Physical Dimensions ........................................... A-5
Weight ................................................................. A-5
XVIII
Preface
Optional ............................................................... A-6
Overview 1 - 1
1
Introduction
Chapter 1: Introduction
Overview
This manual refers to the hardware and essential software required to run your
computer. Depending on how your system is configured, some or all of the
features described may already be set up. This chapter covers:
• The Manual — how to use it
• System Map — navigating around your computer
Advanced Users
If you are an advanced user you may skip over most of this manual. However
you may find it useful to refer to “Drivers & Utilities” on page 4 - 1,
“BIOS
Utilities” on page 5 - 1 and
“Upgrading The Computer” on page 6 - 1. You
may also find the notes marked with a
of interest to you.
Beginners and Not-So-Advanced Users
If you are new to computers (or do not have an advanced knowledge of them)
then you should try to look through all the documentation. Do not worry if you
do not understand everything the first time. Keep this manual nearby and refer
to it to learn as you go. You may find it useful to refer to the notes marked with
a
as indicated in the margin.
Notes
Check the light colored
boxes with the mark
above to find detailed
information about the
computer’s features.
Introduction
1 - 2 Overview
1
Warning Boxes
No matter what your level please pay careful attention to the warning and safety information indicated by the symbol. Also please note the safety and
handling instructions as indicated in the
Preface.
Not Included
Operating Systems (e.g. Windows 2000 Professional, Windows XP etc.) have
their own manuals, as do applications (e.g. word processing, spreadsheet and
database programs). If you have questions about the operating systems or programs then please consult the appropriate manuals.
System Software
Your computer may already come with system software pre-installed. Where
this is not the case, or where you are re-configuring your computer for a different system, you will find this manual refers to the following operating systems:
• Microsoft Windows 2000 Professional
• Microsoft Windows XP Home and Professional Editions
Quick Start Guide 1 - 3
1
Introduction
Quick Start Guide
This guide assumes that you are already familiar with computers and can tell
at a glance what and where all the key components are. If you are not that comfortable with this type of device, then please refer to the following pages,
which give an overview of the system.
It is still best to review these steps, before taking any action. If there is anything you are not sure about, then please refer to the appropriate chapter before
continuing.
Unless you need to install an operating system, your computer should be ready
to work right out of the box. Before you begin please follow the safety instructions in the Preface.
1. Remove all packing materials.
2. Securely attach any peripherals you want to use with the computer (e.g.
keyboard and mouse) to their ports.
3. Attach the AC adapter to the DC-in jack at the rear of the computer (see
“Rear View” on page 1 - 16), then plug the AC power cord into an outlet,
and connect the AC power cord to the AC adapter.
4. Raise the lid/LCD to a comfortable viewing angle.
5. Press the power button to turn “On”.
Peripheral Devices
Please note that peripherals (printers, digital cameras, etc.)
which attach to your
computer by either
USB or Mini-IEEE
1394 ports may be
connected after Windows is up and run-
ning. All other
peripherals must be
connected before you
turn on the system.
Introduction
1 - 4 System Map
1
System Map
Your computer has a lot of built-in features. Most of these are enabled by your
operating system. Further explanations of the various subsystems are covered
in the chapter or pages indicated.
Getting to Know Your Computer
The following graphics will help you to become familiar with the basic functions, and to learn the location of the various ports and components of your
computer.
Model Differences
This notebook series includes two different model types according to the specifications and designs. You can identify if your computer is Model A or B by
checking Table 1 - 1 “Model Differences” below. Both models incorporate
two design types, see the pictures in Figure 1 - 2 for the design differences.
Feature Model A Model B
Design Supported See Figure 1 - 2 for details
CPU Supported See “Processor Types” on page A - 1 for details
Power
5.0A 6.0 A
Design Types
This manual refers to
the notebook designs
pictured on this page.
The designs vary
slightly in external design. Photographs
used throughout this
manual are of Model A
(Design I) unless specified otherwise.
Table 1 - 1
Model Differences
Top View 1 - 5
1
Introduction
Top View
To open the LCD display:
1. Place the computer on a stable surface.
2. Move the LCD latches in the direction of the arrows to release the top
cover.
3. Lift the top cover to reveal the LCD panel and keyboard.
4. Adjust the LCD panel to a comfortable viewing angle.
5. The LED indicators show the power and battery status of the computer,
give notification of e-mail received, and the power status of wireless
modules.
1
2
1
Figure 1 - 1
Top View with LCD
Panel Closed
1. LCD Latches
2. LED Power &
Communication
Indicators
1
2
Introduction
1 - 6 Top View
1
Top View with LCD Panel Open
Figure 1 - 2
Top View with LCD
Panel Open
(Design Differences)
1. Optional PC
Camera
2. LCD
3. Built-In Microphone
4. LED Power &
Communication
Indicators
5. LED Status
Indicators
6. Hot-Key buttons
7. Close Cover Switch
8. Power Button
9. Keyboard
10. TouchPad and
Buttons
2
6
4
5
7
8
3
9
10
1
Design I Design II
2
6
4
5
7
8
3
9
10
1
Top View 1 - 7
1
Introduction
PC Camera
The PC Camera will allow you to capture video files to .avi format. Make sure
you install the driver and software, then run the software by selecting the AM-
CAP program (see “PC Camera” on page 7 - 10).
LCD Panel
The computer comes with a 14.1" OR a 15.0" TFT Liquid Crystal Display
screen. See “LCD Options” on page A - 3 for details of the configuration options.
Microphone
Record on your computer with the built-in microphone.
LED Power & Communication Indicators
These indicators display the system power status, and battery status of the
computer. The third indicator may be configured to give a visual confirmation
when e-mail is received in the default e-mail program (see “LED Power &
Communication Indicators” on page 2 - 6).
LED Status Indicators
These display the system’s operational status. Refer to “LED Status Indica-
tors” on page 2 - 5 for more information on what the lights mean.
Introduction
1 - 8 Top View
1
Hot-Key Buttons
The three hot-key buttons allow you instant access to your default Internet
browser, default e-mail program, and an application of your choice. To learn
how to set the buttons, see “Hot-Key Buttons” on page 2 - 17.
Close Cover Switch
This switch acts as a sensor to tell when the LCD Panel is closed. When this
LCD cover sensor is activated, the setting of your operating system’s power
scheme (“When I close the lid of my portable computer”) sends the computer
into a power saving state (see Figure 3 - 19 on page 3 - 26).
Power Button
Press this button to turn your computer on or off (see “Turning on the
Computer” on page 2 - 4).
This button may also be used as a suspend/resume
key, once configured as such in the power management control panel of your
operating system (see “Configuring the Power Button” on page 3 - 26).
Shutdown
Please note that you
should always shut
your computer down
by choosing the Shut
Down/Turn Off Computer command from
the Start menu in Windows. This will help
prevent hard disk or
system problems.
Top View 1 - 9
1
Introduction
Keyboard
The computer has a “Win Key” keyboard including a numeric keypad. It has
the same features as a full-sized desktop keyboard and can easily be replaced
with a different language keyboard should you desire.
TouchPad & Buttons
The pointing device features a sensitive glide pad for precise movements. It
functions the same way as a two-button mouse. The right TouchPad button is
the same as the right mouse button; the left TouchPad button is the same as
the left mouse button. The central button may be used to scroll up and down,
or may be configured to perform a variety of functions (see “Configuring the
TouchPad and Buttons” on page 2 - 21).
Forced Off
If the system “hangs”,
and the Ctrl + Alt + Del
key combination
doesn’t work, press the
power button for 4 sec-
onds, or longer, to
force the system to
turn itself off.
Introduction
1 - 10 Front View
1
Front View
Figure 1 - 3
Front View
1. LCD Latches
2. Mini-IEEE 1394
Port
3. S/PDIF Out Port
4. Microphone-In Jack
5. Headphone-Out
Jack
6. Infrared
Transceiver
7. Wireless Module
ON/OFF Switch
8. Built-In Speakers
8 8
4 5 6 72 3
1 1
IEEE 1394
The Mini-IEEE 1394 port only supports SELF POWERED IEEE 1394 devices.
Infrared Communication
The Infrared transceiver operates on a “Line of Sight”. Make sure nothing is blocking the “Line of Sight” between your system’s transceiver and the destination’s
transceiver.
Loading...