How it Works
Clevo
Loading...
5820P
Service Manual
135 pgs11.46 Mb0

Clevo 5600P, 5620P, 5800P, 5820P Service Manual

Preface
I
Preface
Notebook Computer
5600P/5620P/5800P/5820P
Service Manual
Preface
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven­dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica­tion, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 May 2002
Trademarks
Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation.
Other brand and product names are trademarks and./or registered trademarks of their respective companies.
Preface
III
Preface
About this Manual
This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers.
It is organized to allow you to look up basic information for servicing and/or upgrading components of the notebook PC.
The following information is included:
Chapter 1, Introduction, provides general information about the location of system elements and their specifications. Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system. Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS
Preface
IV
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on CD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro­gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
Preface
V
Preface
Contents
Introduction ........................................................... 1-1
Overview ............................................................................................................. 1-1
System Specifications ......................................................................................... 1-2
Processor ............................................................................................................. 1-2
Core Logic ........................................................................................................... 1-2
Structure .............................................................................................................. 1-2
Security ................................................................................................................ 1-2
Memory ............................................................................................................... 1-2
BIOS .................................................................................................................... 1-2
LCD ..................................................................................................................... 1-2
Display ................................................................................................................. 1-3
Storage ................................................................................................................. 1-3
Audio ................................................................................................................... 1-3
PC Card ............................................................................................................... 1-3
Interface ............................................................................................................... 1-4
Communication ................................................................................................... 1-4
Power Management ............................................................................................. 1-4
Power ................................................................................................................... 1-5
Indicators ............................................................................................................. 1-5
Environmental Spec ............................................................................................ 1-5
Physical Dimensions ........................................................................................... 1-5
Weight ................................................................................................................. 1-5
Optional ............................................................................................................... 1-5
External Locator - Top Views ............................................................................. 1-6
Front View .......................................................................................................... 1-7
External Locator - Right & Rear Views .............................................................. 1-8
External Locator - Bottom View ......................................................................... 1-9
Mainboard Overview - Top ............................................................................... 1-10
Key Parts .......................................................................................................... 1-10
Preface
VI
Preface
Mainboard Overview - Bottom ......................................................................... 1-11
Key Parts ........................................................................................................... 1-11
Mainboard Overview - Top ............................................................................... 1-12
Cable Connectors .............................................................................................. 1-12
Mainboard Overview - Bottom ......................................................................... 1-13
Cable Connectors .............................................................................................. 1-13
Disassembly ............................................................ 2-1
Overview ............................................................................................................. 2-1
Maintenance Tools .............................................................................................. 2-2
Connections ......................................................................................................... 2-2
Maintenance Precautions .................................................................................... 2-3
Cleaning ...............................................................................................................2-3
Disassembly Steps ............................................................................................... 2-4
To remove the Battery: .........................................................................................2-4
To remove the Bay One Device: ..........................................................................2-4
To remove the Hard Disk Drive: .......................................................................... 2-4
To remove the Bay Two Device: .........................................................................2-4
To remove the Keyboard: .....................................................................................2-4
To remove the System Memory: .......................................................................... 2-4
To remove the CPU: .............................................................................................2-4
To remove the Modem: ........................................................................................2-4
To remove the Wireless LAN Module: ................................................................ 2-4
To remove the Palm Rest: ....................................................................................2-4
To remove the Bottom Case: ................................................................................2-4
To remove the Audio “DJ” Module: ....................................................................2-5
To remove the HDD Converter Board: ................................................................2-5
To remove the Mainboard: ................................................................................... 2-5
To remove the DC/DC Board: .............................................................................2-5
To remove the Click Board: .................................................................................2-5
To remove the TouchPad: .................................................................................... 2-6
To remove the LED Board: .................................................................................. 2-6
Preface
VII
Preface
To remove the Speakers: ......................................................................................2-6
To remove the Inverter: ........................................................................................2-6
To remove the LCD panel: ...................................................................................2-6
Removing the Battery ......................................................................................... 2-7
Removing the Bay One Device ........................................................................... 2-8
Removing the Hard Disk Drive Assembly .......................................................... 2-9
Removing the Bay Two Device ........................................................................ 2-10
Removing the Keyboard ................................................................................... 2-11
Removing the System Memory ......................................................................... 2-12
Removing the CPU ........................................................................................... 2-13
Removing the Modem ....................................................................................... 2-15
Removing the Wireless LAN Module ............................................................... 2-15
Removing the Palm Rest ................................................................................... 2-16
Removing the Bottom Case .............................................................................. 2-17
Removing the Audio "DJ" Module ................................................................... 2-19
Removing the HDD Converter Board ............................................................... 2-20
Removing the Mainboard .................................................................................. 2-21
Removing the DC/DC Board ............................................................................ 2-23
Removing the Click Board ................................................................................ 2-24
Removing the TouchPad ................................................................................... 2-24
Removing the LED Board ................................................................................. 2-25
Removing the Speakers ..................................................................................... 2-25
Removing the Inverter ....................................................................................... 2-26
Removing the LCD Panel ................................................................................. 2-27
Part Lists ............................................................... A-1
Part List Illustration Location .............................................................................A-2
Top (5600P) ........................................................................................................A-3
Bottom (5600P) ...................................................................................................A-4
LCD 15” (5600P) ................................................................................................A-5
Battery (5600P) ...................................................................................................A-6
Second Battery (5600P) ......................................................................................A-7
Preface
VIII
Preface
TEAC CD-ROM Drive (5600P) .........................................................................A-8
KME CD-RW Drive (5600P) .............................................................................A-9
Combo Drive (5600P) .......................................................................................A-10
DVD-ROM Drive (5600P) ..............................................................................A-11
Audio DJ (5600P) .............................................................................................A-12
Floppy Disk Drive (5600P) ...............................................................................A-13
Top (5620P) ......................................................................................................A-14
Bottom (5620P) .................................................................................................A-15
LCD 15”(5620P) ...............................................................................................A-16
Battery (5620P) .................................................................................................A-17
Second Battery (5620P) ....................................................................................A-18
TEAC CD-ROM Drive (5620P) .......................................................................A-19
KME CD-RW Drive (5620P) ...........................................................................A-20
Combo Drive (5620P) .......................................................................................A-21
DVD-ROM Drive (5620P) ...............................................................................A-22
Audio DJ (5620P) .............................................................................................A-23
Floppy Disk Drive (5620P) ...............................................................................A-24
Top (5800P) ......................................................................................................A-25
Bottom (5800P) .................................................................................................A-26
LCD 15” (5800P) ..............................................................................................A-27
Battery (5800P) .................................................................................................A-28
Second Battery (5800P) ....................................................................................A-29
TEAC CD-ROM Drive (5800P) .......................................................................A-30
KME CD-RW Drive (5800P) ...........................................................................A-31
Combo Drive (5800P) .......................................................................................A-32
DVD-ROM Drive (5800P) ...............................................................................A-33
Audio DJ (5800P) .............................................................................................A-34
Floppy Disk Drive (5800P) ...............................................................................A-35
Top (5820P) ......................................................................................................A-36
Bottom (5820P) .................................................................................................A-37
LCD 15” (5820P) ..............................................................................................A-38
Battery (5820P) .................................................................................................A-39
Preface
IX
Preface
Second Battery (5820P) ....................................................................................A-40
TEAC CD-ROM Drive (5820P) .......................................................................A-41
KME CD-RW Drive (5820P) ...........................................................................A-42
Combo Drive (5820P) .......................................................................................A-43
DVD-ROM Drive (5820P) ..............................................................................A-44
Audio “DJ” (5820P) ..........................................................................................A-45
Floppy Disk Drive (5820P) ...............................................................................A-46
Schematic Diagrams ..............................................B-1
System Block Diagram .......................................................................................B-3
CPU Socket 478 - 1 of 2 .....................................................................................B-4
CPU Socket 478 - 2 of 2 .....................................................................................B-5
North Bridge MCH 845 Power & Ground - 1 of 2 .............................................B-6
North Bridge MCH 845 Memory Interface - 2 of 2 ............................................B-7
Clock Generator ..................................................................................................B-8
DDRAM ..............................................................................................................B-9
DDR Termination ..............................................................................................B-10
Mobility P7 ........................................................................................................B-11
Mobility Mem A: Term; LVDS ........................................................................B-12
Mobility Mem B: CRT; LVDS; TV OUT .........................................................B-13
ICH3 - 1 of 3 .....................................................................................................B-14
ICH3 - 2 of 3 .....................................................................................................B-15
ICH3 (USB) - 3 of 3 ..........................................................................................B-16
HDD; CD-ROM; FDD ......................................................................................B-17
Mini PCI; MDC Modem ...................................................................................B-18
LAN RTL8139CL .............................................................................................B-19
TI 1394 (43AB22) .............................................................................................B-20
NS-PC87393; IR; ROM ....................................................................................B-21
H8 ......................................................................................................................B-22
KBC Conn; Fan Conn; LDO .............................................................................B-23
AC-In; Power Button ........................................................................................B-24
AC ‘97 AD 1886 ...............................................................................................B-25
Preface
X
Preface
PCI 1410 ............................................................................................................B-26
PCMCIA Socket ................................................................................................B-27
CPU Core Power ...............................................................................................B-28
D/D Conn ..........................................................................................................B-29
+3V; +5V ..........................................................................................................B-30
LED Board ........................................................................................................B-31
Charger Board - PCharger .................................................................................B-32
Charger Board - PConn .....................................................................................B-33
Updating the FLASH ROM BIOS....................... C-1
Introduction
Overview 1 - 1
1.Introduction
1: Introduction
Overview
This manual covers the information you need to service or upgrade the 5600P/5620P/5800P/5820P notebook computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about drivers (e.g. VGA & audio) is also found in User’s Manual. That manual is shipped with the computer.
Operating systems (e.g. DOS, Windows 9x, Windows NT 4.0, Windows 2000, Windows XP, OS/2 Warp, UNIX, etc.) have their own manuals as do application software (e.g. word processing and database programs). If you have questions about those programs, you should consult those manuals.
The 5600P/5620P/5800P/5820P notebook is designed to be upgradeable. See “Disassembly” on page 2 - 1 for a detailed description of the upgrade procedures for each specific component. Please note the warning and safety information indi­cated by the “” symbol.
The balance of this chapter reviews the computer’s technical specifications and features.
Introduction
1 - 2 System Specifications
1.Introduction
System Specifications
Processor
• Intel Pentium 4 Processor - (478-pin) FC-PGA2 package (
µ0.18) 0.18 Micron Process Technology - 1.4/1.5/1.6/1.7/1.8GHz
(
µ0.13) 0.13 Micron Process Technology - 2.0/2.2/2.4GHz
• Mobile Intel Pentium 4 Processor-M - (478-pin) Micro-FCPGA package (µ0.13) 0.13 Micron Process Technology - 1.4/1.5/1.6/1.7/1.8/2.0GHz
Core Logic
• Intel® 845MP+ICH3Mchipset
Structure
• All-in-one
• Compliant to PC99 standard
Security
• Kensington® Lock
Memory
• Two 200Pin SODIMM sockets, PC200/266MHz DDR devices
• Expandable up to 1024 MB (128/256/512MB SODIMM Modules)
BIOS
• One 512KB Flash ROM
•Phoenix BIOS
LCD
• 14.1" XGA 1024x768/ SXGA+ 1400x1050, 15.0" XGA 1024X768, 15.0" 1400x1050 TFT SXGA+, 15.0" UXGA 1600x1200
Introduction
System Specifications 1 - 3
1.Introduction
Display
• ATI M7-P chipset, Integrated AGP™ 4X
• Integrated 128-bit 2D / 3D Graphics Accelerator­Advanced HW Acceleration for DVD Playback (Motion Compensation engine and IDCT)­Fully DirectX 8 Compliant Graphics Engine
• External memory up to 32/64/128MB DDR SGRAM on board
• Dual-view Display Monitor
• TV resolution up 1024x768 32bpp
• CRT resolution up to 2048x1536
Storage
• Bay one interchangeable for 3.5" 3-mode FDD, OR DVD-ROM, OR CD-ROM, OR CD-RW, OR Combination DVD-ROM/
CD-RW drive, OR secondary battery
• Bay two fixed DVD-ROM, OR CD-ROM, OR CD-RW, OR Combination DVD-ROM/ CD-RW drive
• Easy changeable 2.5" 9.5 mm (h) HDD
• Support Master mode IDE, support PIO mode 4 / ATA-33/66/100 (Ultra DMA)
Audio
• AC'97 2.1 Compliant Interface
• 3D stereo enhanced sound system
• Compatible Sound-Blaster PRO™
• S/PDIF Digital output (5.1 CH)
• Built in microphone
•Audio DJ
• Built in 2 speakers 1 watt 36F, 8O
PC Card
• One PCMCIA 3.3V/5V sockets, one type II
• Supports CardBus
Introduction
1 - 4 System Specifications
1.Introduction
Interface
• Built in TouchPad (Scroll functionality included)
• Four USB ports
• One IEEE 1394 port
• One S-Video jack for TV output
• One parallel port (LPT1), support ECP/EPP
• Infrared file transfer, IrDA 1.1 FIR/SIR/ASKIR
• External CRT monitor
• One PS/2 port support mouse and keyboard (through Y cable)
• One headphone-out jack
• One microphone-in jack
• One S/PDIF out port
• One RJ-11 jack for MDC Modem
• One RJ-45 jack for LAN
• DC-in jack
• Built-in 3 instant keys, www, email, and Player
Communication
• Infrared transfer: 115.2K bps SIR/ 4M bps FIR, IrDA 1.1 compliant
• 10/100Mb Ethernet LAN built-in
• 802.11b Wireless LAN mini-PCI interface (option)
• 56K MDC Modem with V.90 & V.92 compliant
Power Management
• Supports ACPI v1.0b
• Supports APM v1.2
• Power on suspend
• Supports suspend to RAM
• Supports suspend to disk
• Battery low suspend
• Modem resume from system suspend
• Resume from LAN ring
• Cover switch
Introduction
System Specifications 1 - 5
1.Introduction
Power
• Full Range AC adapter - AC in 100~240V, 50~60Hz DC Output 20V, 6.0A.
• Main battery smart Li-Ion 59W (removable)
• Second battery smart Li-Ion 50W (removable)
Indicators
• LED indicator (HDD, Suspend/Power on/ AC-In, Battery Charging/Battery full, E-mail, Num Lock, Caps Lock, Scroll Lock)
Environmental Spec
• Temperature Relative Humidity
• Operating: 5
°C~ 35°C Operating: 20% ~ 80%
• Non-Operating: -20
°C ~ 60°C Non-Operating: 10% ~ 90%
Physical Dimensions
• 329 (w) x290 (d) x 44(h) mm
Weight
• 3.2 kg without battery
Optional
• Secondary battery pack
•3.5" 3-mode FDD
• DVD-ROM Drive
• CD-RW Drive
• DVD-ROM and CD-RW Combo Drive
• Software DVD Player
• Wireless LAN module
Introduction
1 - 6 External Locator - Top Views
1.Introduction
External Locator - Top Views
4 5
6
7
8
9
10
11
1
2
Model Differences
This manual refers to the two notebook mod­els pictured on this page.
The models vary slightly in external de­sign. Photographs used throughout this manual are of Model A.
Model A Model B
4
2
3
4 5
6
7
8
9
10
11
1
2
4
2
3
Figure 1 - 1
Top Views
1. LCD
2. LED Power & E-Mail Indicators
3. Close Cover Switch
4. Speakers
5. Hot-Key buttons
6. LED Status Indicators
7. Power Button
8. Keyboard
9. TouchPad and Buttons
10. Palm Rest (Removable)
11. LCD Latch
Introduction
Front View 1 - 7
1.Introduction
Front View
Figure 1 - 2
Front View
1. LCD Latch
2. Audio “DJ” CD Player Control Panel On/Off Switch
3. Previous Track
4. Next Track
5. LCD
6. Play Pause
7. Stop
8. Volume Down
9. Volume Up
10. Built-In Microphone
Figure 1 - 3
Left Side View
1. DC-In Jack
2. Vent
3. PC Card Slot
4. PC Card Eject Button
43
1
2 876
5
9
10
43
1
2
Introduction
1 - 8 External Locator - Right & Rear Views
1.Introduction
External Locator - Right & Rear Views
Figure 1 - 4
Right Side View
1. Device Bay One
2. Device Bay Two
3. Infrared Transceiver
Figure 1 - 5
Rear View
1. Security Lock
2. Microphone-In Jack
3. Headphone-Out Jack
4. S/PDIF Out Port
5. Mini - IEEE 1394 Port
6. 4 USB Ports
7. RJ-11 Phone Jack
8. RJ-45 LAN Jack
9. S-Video Connector
10. External Moni­tor (CRT) Port
11. Parallel Port
12. PS/2 Type Port
13. Vents
3
1
2
2 4 6
7
8
9
11
12
6
1
13
13
3 5
10
Introduction
External Locator - Bottom View 1 - 9
1.Introduction
External Locator - Bottom View
Figure 1 - 6
Bottom View
1. Vent/Fan Outlets
2. Device Bay One
3. Device Bay One Release Latch
4. Device Bay Two
5. Battery
6. Battery Release Latch
1
2
3
4
5
6
1
1
Introduction
1 - 10 Mainboard Overview - Top
1.Introduction
Mainboard Overview - Top
Key Parts
Figure 1 - 7
Mainboard
Overview - Top
Key Parts
1. 2 * SO-DIMM sockets
2. AC”97 Codec
3. TI 1394 Control­ler
4. Flash BIOS ROM
5. Audio DJ Controller
6. CMOS Battery
7. On-Board Video Memory
1
2
4
5
6
3
7
7
Introduction
Mainboard Overview - Bottom 1 - 11
1.Introduction
Mainboard Overview - Bottom
Key Parts
Figure 1 - 8
Mainboard
Overview - Bottom
Key Parts
1. CPU Socket (no CPU installed)
2. VGA Chip - ATI M7-P
3. LAN Controller ­RTL8139
4. Clock Generator
5. PCI Bus1410 Controller
6. Super IO NS87393
7. Southbridge Intel ICH3 421 EBGA
8. Northbridge Intel MCH 845-MP Brookdale 593 FCBGA
9. H8 Keyboard Controller
10.Audio AMP TI­TPA0132
11.On-Board Video Memory
1
2
3
4
5
6
7
8
9
10
11
11
Introduction
1 - 12 Mainboard Overview - Top
1.Introduction
Mainboard Overview - Top
Cable Connectors
Figure 1 - 9
Mainboard
Overview - Top
Cable Connectors
1. JINTKB1 (Key­board Connector)
2. JTP1 (TouchPad Connector)
3. JMDC1 (Modem Connector)
4. JSPK1 (Speaker Connector)
5. JLED1 (LED Connector)
6. JLCD1 (LCD Connector)
7. JBAT1 (CMOS Battery Connector)
8. JINV1 (Inverter Connector)
9. JLAN1 (LAN Connector)
10.JMINPCI1 (Wireless LAN Connector)
11. J FAN3 (Fan Connector)
12.JMIC1 (Microphone Connector)
2
5
7
8
10
11
4
6
1
3
9
12
Introduction
Mainboard Overview - Bottom 1 - 13
1.Introduction
Mainboard Overview - Bottom
Cable Connectors
Figure 1 - 10
Mainboard
Overview - Bottom
Cable Connectors
1. JHDD1 (Hard Disk Connector)
2. JFAN1 (Fan Connector)
3. JFAN2 (Fan Connector)
4. PCMCIA Connector
5. JCD1 (Bay One Device Connector)
6. JDD1 (DC/DC Board Connector)
7. JDD2 (DC/DC Board Connector)
1
4
5
6
3
2
7
Introduction
1-14
1.Introduction
Disassembly
Overview 2 - 1
2.Disassembly
2: Disassembly
Overview
This chapter provides step-by-step instructions for disassembling parts and subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).
We suggest you completely review any procedure before you take the computer apart.
Procedures such as upgrading/replacing the RAM, CD device and hard disk are included in the User’s Manual but are repeated here for your convenience.
To make the disassembly process easier each section may have a box in the page margin. Information contained under the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the dis­assembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previ­ous disassembly procedure. The amount of screws you should be left with will be listed here also.
A box with a 5 will provide any possible helpful information. A box with a contains warnings.
An example of these types of boxes are shown in the sidebar.
Component Parts
5
Information
Warning
Disassembly
2 - 2 Overview
2.Disassembly
NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the battery is removed too).
Maintenance Tools
The following tools are recommended when working on the notebook PC:
• M3 Philips-head screwdriver
• M2.5 Philips-head screwdriver (magnetized)
• M2 Philips-head screwdriver
• Small flat-head screwdriver
• Pair of needle-nose pliers
• Anti-static wrist-strap
Connections
Connections within the computer are one of four types:
Locking collar sockets for ribbon connectors To release these connectors, use a small flat-head screwdriver to
gently pry the locking collar away from its base. When replac­ing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.
Pressure sockets for multi-wire connectors To release this connector type, grasp it at its head and gently
rock it from side to side as you pull it out. Do not pull on the wires themselves. When replacing the connection, do not try to force it. The socket only fits one way.
Pressure sockets for ribbon connectors To release these connectors, use a small pair of needle-nose pli-
ers to gently lift the connector away from its socket. When re­placing the connection, make sure the connector is oriented in the same way. The pin1 side is usually not indicated.
Board-to-board or multi-pin sockets To separate the boards, gently rock them from side to side as
you pull them apart. If the connection is very tight, use a small flat-head screwdriver - use just enough force to start.
Disassembly
Overview 2 - 3
2.Disassembly
Maintenance Precautions
The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re­moval and/or replacement job, take the following precautions:
1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged.
2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight.
3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong mag­netic fields. These can hinder proper performance and damage components and/or data. You should also monitor the position of magnetized tools (i.e. screwdrivers).
4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly dam- aged.
5. Be careful with power. Avoid accidental shocks, discharges or explosions.
• Before removing or servicing any part from the computer, turn the computer off and detach any power supplies.
• When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire.
6. Peripherals – Turn off and detach any peripherals.Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. Before handling any part in the computer, discharge any static electricity inside the computer. When handling a printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that you use an anti-static wrist strap instead.
7. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands pro­duce oils which can attract corrosive elements.
8. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted to charged surfaces, reducing performance.
9. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as screws, loose inside the computer.
Cleaning
Do not apply cleaner directly to the computer, use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
Power Safety
Warning
Before you undertake any upgrade proce­dures, make sure that you have turned off the power, and discon­nected all peripherals and cables (including telephone lines). It is advisable to also re­move your battery in order to prevent acci­dentally turning the machine on.
Disassembly
2 - 4 Disassembly Steps
2.Disassembly
Disassembly Steps
The following table lists the disassembly steps, and on which page to find the related information. PLEASE
PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Battery:
1. Remove the battery page 2 - 7
To remove the Bay One Device:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
To remove the Hard Disk Drive:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
To remove the Bay Two Device:
1. Remove the battery page 2 - 7
2. Remove the Bay Two device page 2 - 10
To remove the Keyboard:
1. Remove the battery page 2 - 7
2. Remove the keyboard page 2 - 11
To remove the System Memory:
1. Remove the battery page 2 - 7
2. Remove the keyboard page 2 - 11
3. Remove the memory page 2 - 12
To remove the CPU:
1. Remove the battery page 2 - 7
2. Remove the CPU page 2 - 13
To remove the Modem:
1. Remove the battery page 2 - 7
2. Remove the keyboard page 2 - 11
3. Remove the modem page 2 - 15
To remove the Wireless LAN Module:
1. Remove the battery page 2 - 7
2. Remove the keyboard page 2 - 11
3. Remove the Wireless LAN module page 2 - 15
To remove the Palm Rest:
1. Remove the Palm Rest page 2 - 16
To remove the Bottom Case:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
Disassembly
Disassembly Steps 2 - 5
2.Disassembly
To remove the Audio “DJ” Module:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
9. Remove the Audio “DJ” module page 2 - 19
To remove the HDD Converter Board:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
9. Remove the Audio “DJ” module page 2 - 19
10. Remove the HDD converter board page 2 - 20
To remove the Mainboard:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
9. Remove the Audio “DJ” module page 2 - 19
10. Remove the HDD converter board page 2 - 20
11. Remove the mainboard page 2 - 21
To remove the DC/DC Board:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
9. Remove the Audio “DJ” module page 2 - 19
10. Remove the HDD converter board page 2 - 20
11. Remove the mainboard page 2 - 21
12. Remove the DC/DC board page 2 - 23
To remove the Click Board:
1. Remove the battery page 2 - 7
2. Remove the Bay One device page 2 - 8
3. Remove the hard disk drive assembly page 2 - 9
4. Remove the Bay Two device page 2 - 10
5. Remove the keyboard page 2 - 11
6. Remove the CPU page 2 - 13
7. Remove the Palm Rest page 2 - 16
8. Remove the bottom case page 2 - 17
9. Remove the Click Board page 2 - 24
Loading...
+ 105 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use