CleverMic UV540A-10-SDI, UV510A-05-HDMI, UV540A-05-SDI, UV510A-10-HDMI, UV510A-05-U3+HDMI User Manual

CleverMic PTZ Camera

User Manual

Attentions

This manual details functions, installation, operation principles and methods
of teacher tracking camera. Please read this manual carefully before installation
and use.

1．How to use

In order to prevent this product or products connected to it from being
damaged, please use it within its prescribed scope of use.

1)Keep the device from rain or moisture;

2)To prevent electric shock, do not open the main case; only qualified

technicians are allowed to install or maintain the device;

3)Do not use the device beyond scope of its temperature, humidity or power

supply specification;

4)When cleaning the camera lens, swipe it with dry soft cloth. If dirt is hard to
be removed, please swipe clean gently with mild detergent. Do not use strong or
corrosive detergent, for it may scratch the lens and thus affect image result;

2．Electrical safety

Installation and use of this product shall be in strict accordance with safety

standards for electricity.

3．Careful handing

Avoid damage to product caused by heavy pressure, strong vibration or

immersion during transportation, storage and installation.

4．Power supply polarity

This product applies DC 12V power supply. Power plug polarity is shown as

follows:

5．Install with caution

1)Do not rotate the camera head violently, otherwise it may cause mechanical
malfunction;

2)This product should be placed on a stable desktop or other horizontal surfaces.

Do not install the product obliquely, otherwise it may display inclined image;

3)When installing the camera on TV or personal computer, use four double
faced adhesive pads at the bottom for fixing;

4)This product shell is made of organic materials. Do not expose it to any liquid,
gas or solids which may corrode the shell.

5)During installation, ensure that there are no obstacles within rotation range of
the holder;

6)Do not power on before finishing installation;

6．Do not dismantle the product without permission

This product contains no parts which can be maintained by users. Any damage
arising from dismantling the product by user without permission will not be included
in warranty.

7．Magnetic field interference

Magnetic field under specific frequency may affect this product image; this is
Class A product. Application in domestic environment may cause radio interference.
Therefore, user should take corresponding measures.

Content

1. FAST INSTALLATION..............................................................................................................................3

1.1 CAMERA INTERFACE EXPLANATION............................................................................................4

1.2 POWER-ON INITIAL CONFIGURATION.........................................................................................4

1.3 VIDEO OUTPUT.............................................................................................................................4

2. PRODUCT OVERVIEW............................................................................................................................6

2.1 PRODUCT INTRODUCTION...........................................................................................................6

2.1.1 PRODUCT MODEL..............................................................................................................6

2.1.2 DIMENSION.......................................................................................................................6

2.1.3 ACCESSORY........................................................................................................................7

2.2 MAIN FEATURES...........................................................................................................................8

2.2.1 CAMERA PERFORMANCE..................................................................................................8

2.2.2 NETWORK PERFORMANCE...............................................................................................8

2.3 TECHNICAL SPECIFICATION..........................................................................................................8

2.4 INTERFACE INSTRUCTION...........................................................................................................10

2.4.1 EXTERNAL INTERFACE......................................................................................................10

2.4.2 BOTTOM DIAL SWITCH....................................................................................................10

2.4.3 RS-232 INTERFACE...........................................................................................................12

3. APPLICATION INSTRUCTION................................................................................................................13

3.1 VIDEO OUTPUT...........................................................................................................................13

3.1.1 POWER-ON INITIAL CONFIGURATION.............................................................................13

3.1.2 VIDEO OUTPUT................................................................................................................13

3.2 REMOTE CONTROLLER...............................................................................................................14

3.2.1 KEYS INTRODUCTION......................................................................................................15

3.2.2 APPLICATIONS.................................................................................................................15

3.3 MENU SETTING..........................................................................................................................16

3.3.1 MAIN MENU....................................................................................................................16

3.3.2 SYSTEM SETTING.............................................................................................................17

3.3.3 CAMERA SETTING...........................................................................................................17

3.3.4 P/T/Z...............................................................................................................................20

3.3.5 VIDEO FORMAT...............................................................................................................20

3.3.6 VERSION..........................................................................................................................21

3.3.7 RESTORE DEFAULT............................................................................................................21

4. NETWORK CONNECTION.....................................................................................................................22

4.1 CONNECTING MODE..................................................................................................................22

4.2 IE LOG IN....................................................................................................................................25

4.2.1 WEB CLIENT....................................................................................................................25

4.2.2 PREVIEW.........................................................................................................................25

4.2.3 PLAYBACK.......................................................................................................................25

4.2.4 CONFIGURATION...........................................................................................................25

4.2.5 VIDEO CONFIGURATION................................................................................................26

4.2.6 NETWORK CONFIGURATION..........................................................................................28

4.2.7 SYSTEM CONFIGURATION.............................................................................................28

4.2.8 LOGOUT........................................................................................................................29

4.2.9 WIRELESS NETWORK....................................................................................................29

5. SERIAL COMMUNICATION CONTROL...............................................................................................30

5.1 VISCA PROTOCOL LIST..............................................................................................................30

5.1.1 CAMERA RETURN COMMAND......................................................................................30

5.1.2 CAMERA CONTROL COMMAND....................................................................................30

5.1.3 INQUIRY COMMAND.....................................................................................................33

5.2 PELCO-D PROTOCOL COMMAND LIST......................................................................................34

5.3 PELCO-P PROTOCOL COMMAND LIST.......................................................................................35

6. CAMERA MAINTENANCE AND TROUBLESHOOTING.........................................................................35

6.1 CAMERA MAINTENANCE..........................................................................................................35

6.2 TROUBLESHOOTING...............................................................................................................…36

1. Fast Installation

1.1 Camera Interface Explanation

Photo 1.1 Interface of SDI Model

Interface of SDI Model：

1、Camera Lens 4、Locating Hole 7、SDI Interface

2、Remote Controller Receiver
Light

3、Tripod Screw Hole 6、LAN Interface 9、DC12V Input Power Supply Socket

5、RS232 Control Interface (input ) 8、A-IN Interface

Photo 1.2 Interface of HDMI Model

Interface of HDMI Model：

1、Camera Lens 4、Locating Hole 7、SDI Interface

2、Remote Controller Receiver

5、RS232 Control Interface (input ) 8、A-IN Interface

Light

3、Tripod Screw Hole 6、LAN Interface 9、DC12V Input Power Supply Socket

Photo 1.3 Interface of U3+HDMI Model

Interface of U3+HDMI Model：

1、Camera Lens 4、Locating Hole 7、HDMI Interface

2、Remote Controller Receiver Light 5、RS232 Control Interface (input ) 8、USB3.0 Interface

3、Tripod Screw Hole 6、LAN Interface

9 、 DC12V Input Power Supply
Socket

Photo 1.4 Interface of U2 Model

Interface of U2 Model：

1、Camera Lens 4、Locating Hole 7、USB2.0 Interface

2 、 Remote Controller Receiver
Light

3、Tripod Screw Hole 6、LAN Interface

Photo 1.6 Interface of U3 Model

5、RS232 Control Interface (input ) 8、DC12V Input Power Supply Socket

Interface of U3 Model：

1、Camera Lens 4、Locating Hole 7、USB3.0 Interface

2、Remote Controller Receiver Ligh 5、RS232 Control Interface (input ) 8、DC12V Input Power Supply Socket

3、Tripod Screw Hol 6、LAN Interface

Notice：SDI Model come with SDI Interface，HDMI Model has HDMI Interface，U3+HDMI
Model including USB3.0 and HDMI Interface，U2 Model has USB2.0 Interface，HD Model has HD
BaseT Interface，U3 Model has USB3.0 Interfadce, Users should read the manual according to
the special model.

1.2 Power on initial configuration

1) Power on: Connect DC12V power supply adapter with power supply socket.

2)Initial configuration: Power on with power indicator light on and remote control receiver light blinking, camera

head moves from bottom left to the bottom, and then goes to the HOME position (intermediate position of both
horizontal and vertical ),while the camera module stretches. When remote control receiver light stops blinking,
the self-checking is finished.

Note:

1. The default address of the remote controller is the 1# address.

2. If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0
position.

1.3 Video Output

This series has a variety of video output; SDI models have video output from LAN, SDI. HDMI models have video
output from LAN, HDMI. U3+HDMI models have video output from LAN, HDMI, USB3.0, which is compatible with
USB2.0. U2 models have video output from LAN, USB2.0. HD models from LAN. U3 models have video output
from LAN, USB3.0, which is compatible with USB2.0.

1) Video Output from LAN

a. Network Cable Connection Port: SDI Model--No.6 in Figure1.1; HDMI Model--No. 6 in Figure1.2; U3+HDMI

Model--No.6 in Figure 1.3; U2 Model--No. 6 in Figure1.4; U3 Model--No. 6 in Figure1.6.

b. Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter

to enter into the login page; click on the “player is not installed, please download and install!" and follow the
installation steps for installation. Then enter the user name admin and password admin (factory default);
press Enter to enter into the preview page, users can carry out PTZ control, video recording, playback,
configuration and other operations.

2) HDMI Video Output

a. HDMI Video Cable Connection: HDMI models refer to No.7 in Figure1.2; U3+HDMI models refer to No.7 in
Figure1.3.

b. Connect the camera and the monitor via HDMII video cable; video output is available after camera self-test.

3) SDI Video Output

a. SDI video cable connection: SDI models refer to No.7 in Figure1.1

b. Connect the camera and the monitor via SDI video cable; video output is available after camera self-test.

USB3.0 video output

a. USB3.0 video cable connection: U3+HDMI models refer to NO.8 in figure1.3; U3 models refer to NO.7 in
figure1.6.

b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image

device, and then video output will be available.

5) USB3.0 compatible with USB2.0 output

a. USB3.0 video cable connection: U3+HDMI models refer to NO.7 in Figure1. 3; U3 models refer to NO.7 in
figure1.6.

b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image

device, and then video output will be available.

6) USB2.0 video output

a. USB2.0 video cable connection: U2 models refer to NO.7 in Figure1. 3.

b. Connect the camera and the monitor via USB2.0 video cable, open video display software, select image

device, and then video output will be available.

Note: USB2.0 output and USB3.0 output is the same interface.

1.4 Bracket mount

Note: Bracket can only be wall mounted or upside down mounted on template and concrete wall, but can not be
installed on plasterboard.

1) Wall mount step

2. Upside down mount step

2. Product overview

2.1 Product Introduction

2.1.1 Product Model

There are four main series according to different video formats, lens optical zooms, output interfaces and remote

control modes.

Model NO.X—XXX—XXX—XX

IR ---IR Remote Controller

WR---Wireless Remote Controller

SDI---SDI Interface

HDMI---HDMI Interface

U3+HDMI---USB 3.0 and HDMI Interface

U2---U2 Interface

U3---USB3.0 Interface

5---5 x Optical Zoom Lens

10---10x Optical Zoom Lens

S---1080P60 Downward Compatibility

M---1080P30Downward Compatibility

Please refer to corresponding features in this manual.

Series

Series

Series

2.1.2 Dimension

Figure 2.2 Camera dimension

2.1.3 Accessory

When you unpack, check that all the supplied accessories are included:

Mod

NO.

Acce

ssory

el

Config

uration

Standa

rd

SDI Series HDMI

Power adapter

1piece

RS232 cable 1

piece

Power adapter 1

piece

RS232 cable 1

piece

U3

Power adapter

1 piece

RS232 cable 1

piece

USB3.0 cable 1 USB2.0 cable 1 USB3.0 cable 1

U2

Power adapter

1 piece

RS232 cable 1

piece

U3+HDMI

Series

Power adapter

1 piece

RS232 cable 1

piece

piece piece piece

User manual 1 User manual 1 User manual 1 User manual 1 User manual 1

Double-side

glue shim

Warranty card 1

piece

IR Remote

controller 1

piece

Wireless

controller 1

piece

Option

al

Wall mounting

bracket

Upside-down

mounting

bracket(optiona

l)

Double-side glue

shim

Warranty card 1

piece

IR Remote

controller 1 piece

Wireless

controller 1 piece

Wall mounting

bracket(optional)

Upside-down

mounting

bracket(optional)

Double-side

glue shim

Warranty card 1

piece

IR Remote

controller 1

piece

Wireless

controller 1

piece

Wall mounting

bracket(optiona

l)

Upside-down

mounting

bracket(optiona

l)

Double-side

glue shim

Warranty card

1 piece

IR Remote

controller 1

piece

Wireless

controller 1

piece

Wall mounting

bracket(optiona

l)

Upside-down

mounting

bracket(optiona

l)

Double-side

glue shim

Warranty card

1 piece

IR Remote

controller 1

piece

Wireless

controller 1

piece

Wall mounting

bracket(optiona

l)

Upside-down

mounting

bracket(optiona

l)

2.2 Main Features

This series camera offers perfect functions, superior performance and rich interfaces. The features include
advanced ISP processing algorithms to provide vivid images with a strong sense of depth, high resolution and
fantastic color rendition. It supports H.265/H.264 encoding which makes motion video fluent and clear even with
less than ideal bandwidth conditions.

1.Superb High-definition Image: It employs 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080
with frame rate up to 60 fps.

2.Various Optical Zoom Lens: It has 5X/10X optical zoom lens for options. The 5X zoom lens is with 83.7 ° wide
view angle without distortion.

3. Leading Auto Focus Technology: Leading auto focus algorithm makes lens a fast, accurate and stable
auto-focusing.

4. Low Noise and High SNR: Low Noise CMOS effectively ensure high SNR of camera video.

Advanced 2D/3D noise reduction technology is also used to further reduce the noise, while ensuring image
sharpness.

5.Quiet PTZ: By adopting high accuracy step driving motor mechanism, it works extremely quiet and moves

smoothly and very quickly to designated position.

HDMI/SDI/

video format

6.Multi-Format Video Outputs: support HDMI、SDI、USB2.0、USB3.0、LAN interfaces

7. Multiple Video compression: Support H.265/H.264 video compression

8. Audio Input Interface

Support 16000,32000,44100,48000 sampling frequency and AAC,MP3,G.711A audio coding.

9. Multiple Network Protocol

Support ONVIF,RTSP,RTMP protocols and support RTMP push mode,easy to link streaming media server

(Wowza,FMS)

10. Multiple Remoter Control

User can choose to use IR remoter or wireless remoter according to the working environment. The 2.4G
wireless remoter will not be affected by angle, distance or infrared interfere. Support remoter signal pass through
function, which is convenient for back-end use.

11. Low-power sleep function: Support low-power sleep/wake up,the consumption is lower than 400mW under
sleep mode

12. Multiple Control Protocols: Support VISCA, Pelco-D, Pelco-P and support auto-recognize protocol.

13. RS-232 Cascade Function: ST series support RS-232 cascade function which is convenient for installing.

14. 255 Presets Positions: Up to 255 presets (10 presets by remoter).

15. Wide Application: Tele-education, Lecture capture, Webcasting, Videoconferencing, Tele-training,
Tele-medicine, Interrogation and Emergency command systems.

2.3 Technical specification

Model 5X 10X

Camera Parameter

Optical
Zoom

5X,f＝3.1～15.5mm 10X,f＝4.7～47mm

Sensor 1/2.8 inch high quality HD CMOS sensor

Effective

16: 9 2.07 megapixel

Pixels

Video

Format

1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;720P60/50/30/25/59.94/29.97

UV540A-05

/10-SDI

Mode

L：SDI, LAN, RS232(INPUT)

, A-IN

U3 interface video format

1)U3:1920X1080P60/50/30/25;1280X720P60/50/30/25;960X540P30;640X360P30;640
X480P30;352X288P30;960X540P30;

2)U3 compatible with U2: 960X540P30; 640X360P30; 1280X720P10/15; 720X576P50;

720X480P60; 640X480P30; 352X288P30.

U2 interface video format

176x144/320x240/320x180/352x288/640x480/720x576/640x360/800X600/960X540/1
024X576/1024X768/1600X896/1920X1080/1280X720；P30/25/20/15/10/5

View Angle 16.43°(tele)--83.7°(wide) 6.43°(tele)--64.2°(wide)

Digital Zoom 5X

Minimum

0.5Lux (F1.8,AGC ON)

Illumination

DNR 2D & 3D DNR

White

Auto / Manual/ One Push/ 3000K/ 4000K/5000K/6500K

Balance

Focus Auto/Manuall/ One Push

Aperture Auto/Manual

Electronic

Auto/Manual

Shutter

BLC ON/OFF

WDR OFF/ Dynamic level adjustment

Video

Brightness,Color,Saturation,Contrast,Sharpness,B/W mode,Gamma curve

Adjustment

SNR >55dB

Input/Output Interface

UV510A-05/10-HDMI Model：HDMI, LAN, RS232(INPUT), A-IN

Video

UV510A-05/10-U3+HDMI Model：USB3.0, HDMI, LAN, RS232(INPUT)

Interfaces

UV510A-05/10-U2 Model：USB2.0, HDMI, LAN, RS232(INPUT)

UV510A-05/10-U3 Model：USB3.0, HDMI, LAN, RS232(INPUT)

Image Code

Dual stream output

Stream

Image
Output
Multiple
Code Source

Video
Compression
Format

Dual Code Source output(SDI/HDMI/USB3.0/USB2.0、LAN )

H.264,H.265

Control
Protocol

Audio Input
Interface

Audio
Output

Audio
Compression
Format

HD IP
Interface

Network
Protocol

Control
Interface

VISCA/Pelco-D/Pelco-P; Baud Rate: 115200/9600/4800/2400bps

Double track 3.5mm linear input;

SDI、HDMI、HDBaseT 、LAN output together with video

AAC、MP3、G.711A

100M IP port(100BASE-TX)

RTSP/RTMP,ONVIF,GBT28181; Support IP Visca control protocol; Distance
update,Distance restart,Distance reset

RS232

Control
protocol

Power
Interface

Supply
Adapter

Input
Voltage

Input
Current

VISCA/Pelco-D/Pelco-P；Boad Rate：115200/9600/4800/2400

HEC3800 outlet (DC12V)

AC110V-AC220V to DC12V/1.5A

DC12V±10%

1A(Max)

Consumptio

12W (Max)

n

PTZ Parameter

Pan Rotation ±135°

Tilt Rotation

Pan Control

-30°～+30°

0.1 -60°/sec

Speed

Tilt Control

0.1-30°/sec

Speed

Preset Speed Pan: 60°/sec,Tilt: 30°/sec

Preset

255 presets (10 presets by remote controller)

Number

Other Parameter

Store

-10 ～+60

Temperature

Store

20% - 95%

Humidity

Working Tem

-10 ～+50

perature

Working

20% - 80%

Humidity

Dimension 151.2mmX152.5mmX126.7mm

Weight 1.4KG

Using

Indoor

Environment

Accessory power supply,remoter,manual,warranty card

Optional

Bracket

Accessory