1
2199576, ANH-24/0985
WIRELESS AROUND THE NECK
BLUETOOTH STEREO HEADSET
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE
2
Getting started
Remove the product from the box.
Remove any packaging from the product.
Please retain all packaging after you have checked and counted all the parts and the
contents against the list.
Package Contents
Bluetooth Stereo Headset
USB charging cable
Instruction Manual
Key Features
Keep headset together all the time
Connect to any Bluetooth enables device
Listen to music wirelessly
Built-in Mic
Control buttons for ease-of-use
Built-in rechargeable battery
Answer & end a call at click of a button
Built-in Volume & Media Control (pause/play)
Connects to previously connected device automatically
Safety Instructions
Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
Do not operate the unit if it has been exposed to water, moisture or any other liquids to
prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
Do not use the unit with wet hands.
Do not put objects into any of the openings.
Keep the unit free from dust, lint etc.
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.
Do not use the handset at excessive volume levels, as damage to hearing may occur.
3
Description of Parts:
1
Speaker
2
Built-In Microphone (bottom)
3
LED Light Indicator
4
Volume Increase (+) / Next Track
5
MF (Multi-Function) / Phone button
6
Charging port (side)
7
Volume Decrease (-) / Previous Track
4
INSTRUCTIONS FOR USE
Charging Instructions
The Bluetooth Headset comes with a built in rechargeable battery. Before using it for the first
time we recommend you charge the battery fully. Only use the supplied USB Cord to charge
the Bluetooth Headset. Please charge for about 2-4 hours.
Connect the USB charging cable to a computer USB port and the Micro USB plug to the
charging port of the device. The Red LED light turns on while the device is charging. It takes
2-4 hours for the unit to fully charge. When the battery is fully charged, the LED light will
turn off.
Switching on/off the device
Press and hold the MF button for 2-3 seconds to turn ON/OFF the device.
Pairing the device with Bluetooth devices (phone or music device)
Ensure the device is turned off, then press and hold the MF button for 2-3 seconds to turn on.
An indication tone will be heard, and the LED flashes blue and red. Place the Bluetooth
Headset and Bluetooth device (phone or music device) so that they are no further than 3
feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please
refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your
device.
Once you have activated Bluetooth on your device, select the “Sports Headset” from the list
of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize pairing.
Once paired successful, another indication tone will be heard, and blue LED will flashes
slowly.
You can now start to use the device.
If pairing is unsuccessful, turn off the device first and then re-pair following the above steps.
Once you have paired the Bluetooth Headset with a device, the Headset will remember this
device and will pair automatically when the device’s Bluetooth is activated and in range. You
do not need to re-pair any previously connected devices.
The Bluetooth Headset will attempt to automatically connect to the last device it was paired
with when switched on. If you want to pair it with a new device, please follow the steps
outlined above.
Once the Bluetooth Headset is paired with your device the music will transmit through the
Bluetooth Headset. Please refer to your device’s user manual for further information.
5
Function Summary
Listening to Music
Once the Headset is paired with your device you can stream music wirelessly through the
Bluetooth Headset. Should you encounter any problems while streaming please refer your
device’s user manual for further information.
Control Function
Function
Operation
Button
Increase Volume
Playing music
Press and hold the + button will increase the volume
Decrease Volume
Playing music
Press and hold the - button will decrease the volume
Pause
Playing music
Short press on the MF button will pause the music
Play
Pausing
Short press on the MF button will restart the music
Previous track
Playing music
A short press on the - button will return you to the
previous track
Next track
Playing music
A short press on the + button will take you to the next
track
An indication tone will alert you when the volume is adjusted to maximum level.
Making a call with the Bluetooth Headset in Bluetooth mode
Basic operation
Function
Operation
Button
Answer a call
Incoming Call
Press the Phone button once to answer an
incoming call
Reject a call
Incoming Call
Press and hold the Phone button 1 second
End a call
Incoming Call
After your phone conversation, short press
the Phone button.
Increase Volume
During a call
Press and hold on the + button once will
increase the volume
Decrease Volume
During a call
Press and hold on the - button once will
decrease the volume
Redial last number
Standby mode and
connected to a device
Short press the Phone button twice
6
Please Note
Not all mobile phones support all the functions listed above. Please refer to your cell
phone’s user’s manual for further information.
Certain functions and indication tone maybe vary depending on your mobile phone.
LED indicator
Please refer to the below tables for a list of the LED statuses whilst using the Bluetooth
Headset.
Charging Indication
LED indicator
Status of the BT Headset
Red LED
Charging
Red LED off
Charging Completed
LED Indication
LED indicator
Status of the BT Headset
LED flashes blue and red
Pairing mode
Care and Maintenance
Read the following recommendations before using the Bluetooth Headset. Following these
you will be able to enjoy the product for many years.
Do not expose the Bluetooth Headset to liquid, moisture or humidity to avoid the
product’s internal circuit being affected.
Don’t use abrasive cleaning solvents to clean the device.
Do not expose the device to extremely high or low temperature as this will shorten the
life of electronic devices, destroy the battery or distort certain plastic parts.
Don’t dispose of the device in a fire as it will result in an explosion.
Don’t expose the device to contact with sharp objects as this will cause scratches and
damage.
Don’t let the device fall on the floor. The internal circuit might get damaged.
Don’t attempt to disassemble the device as it may get damaged if you are not
professional.
Specifications
Bluetooth specification Bluetooth 4.2
Operating distance 33 Feet
Working time 2 hours (moderate volume)
Charging input voltage DC 5V
Charging time 2-4 hours
Speaker Power 2 x 5mW
Built-In Battery 100mAh
(Note: Battery life & charging time may vary based on usage & types of devices used.)
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If the product does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
LIMITED WARRANTY
This manufacturer's product warranty extends to the original consumer purchaser of the product.
Neither the retailer nor any other company involved in the sale or promotion of this product is a
co-warrantorof thismanufacturerwarranty.
WARRANTY DURATION: All materials and workmanship are warranted to the original consumer
purchaser for a period ofninety(90) days from theoriginalpurchasedate.
WARRANTY COVERAGE: Thisproduct is warranted againstdefective materialsor workmanship. This
warranty is void if the product has been damaged by accident, in shipment, unreasonable use,
7
8
misuse, neglect, improper service, commercial use, repairs by unauthorized personnel or other
causes not arising out of defects in materials or workmanship. This warranty doesn’t cover the
following which may be supplied with this product, including but not limited to; LCD Screens,
glass parts, lenses, bulbs etc. This warranty is effective only if the product is purchased and
operated in USA and Canada, and does not extend to any units which have been used in
violation of written instructions furnished by manufacturer or to units which have been altered or
modified or, to damaged products or parts thereof which have had the serial number removed,
altered, defaced or rendered illegible.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied and no
representative or person is authorized to assume for manufacturer any other liability in connection
with the sale of our products. There shall be no claims for defects or failure under any theory of tort,
contractor commercial law including but not limited to, negligence, gross negligence, strict liability,
breach of warranty and breach of contract. Under no circumstances will Manufacturer’s /
Distributor’s maximumliability exceed the retailvalue of the product.
WARRANTY PERFORMANCE: During the above 90day warranty period,a product with a defect will
be either repaired or replaced with a reconditioned comparable model (at manufacturer's
option). The repaired or replacement product will be in warranty for the balance of the 90 day
warranty period and an additional one-month period. No charge will beapplicable for such repair or
replacement.
SERVICE AND REPAIR: If service is required forthis product, you shouldfirst contact Midwest Trading
Group Customer Service at info@mtradinggroup.com or by calling 1 (866) 815-4714, Monday to
Friday 10amto 6pm EST.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment.
As a precautionary measure, carefully package the product for shipment, and insure it with the
carrier. Be sure to enclose the following details with the product: your full name, return address
and daytime phone number, a note describing the problem you experienced, a copy of your sales
receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be
accepted.
Loading...