Clever Acoustics MA 130 100V 30W, MA 160 100V 60W, MA 130, MA 160 User Manual
USER MANUAL
MA 160 100V 60W Mixer Amplier
MA 130 100V 30W Mixer Amplier
www.cleveracoustics.co.uk
Order code: CRAM03
Order code: CRAM02
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
CAUTION!
Keep this equipment away from rain,
moisture and liquids.
SAFETY INSTRUCTIONS
Every person involved with the installation, operation & maintenance of this
equipment should:
- Be competent
- Follow the instructions of this manual
CAUTION! TAKE CARE USING THIS EQUIPMENT!
HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
Before your initial start-up, please make sure that there is no damage caused during
transportation. Should there be any, consult your dealer and do not use the equipment.
To maintain the equipment in good working condition and to ensure safe operation, it is
necessary for the user to follow the safety instructions and warning notes written in this
manual.
Please note that damages caused by user modications to this equipment are not
subject to warranty.
1
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modication to the
equipment.
• Never let the power-cable come into contact with other cables. Handle the
power-cable and all mains voltage connections with particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not switch the equipment on and off in short intervals, as this will reduce the
system’s life.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Do not carry the unit with only one handle. Always carry using both handles.
• Always disconnect the power from the mains when equipment is not in use or
before cleaning! Only handle the power-cable by the plug. Never pull out the plug
by pulling the power-cable.
• Make sure that the supply voltage is 240V.
• Make sure that the power-cable is never crimped or damaged. Check the
equipment and the power-cable periodically.
• If the equipment is dropped or damaged, disconnect the mains power supply
immediately.
Have a qualied engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic temperature uctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation might
damage the equipment. Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, discontinue use immediately. Pack the
unit securely (preferably in the original packing material), and return it to your
Prolight dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be carried out by a qualied
technician. THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
• WARRANTY; One year from date of purchase.
• If this equipment is operated in any other way, than those described in this
manual, the product may suffer damage and the warranty becomes void.
• Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks,
etc.
• Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and property.
2
This 100V line mixer amplier was designed specically for use in permanent audio
installations, where reliability and premium sound quality are a must. Highly rugged
construction and high efciency design make this amplier perfect for continuous duty
applications in situations were power will be left on for indenite periods of time.
This 100V line amplier is warranted from defects for one year from the date of purchase.
Should your amplier require service, either within or beyond that warranty period, please
contact your Prolight Dealer.
This unit includes a host of features, along with an impressive list of specications, which
are detailed over the next pages. Please take the time to read this document completely
prior to installation of this product.
The Mixer Amplier series is equiped with priority function. They are designed to suit all PA
system application in schools, ofces and stores.
Features
• 19” rackmountable chassis
• 70V, 100V and low impedance 4-16Ω loudspeaker output
• Two microphone and two line inputs
• MIC 1 with VOX priority and VOX level onfront panel
• MIC 1-2 and LINE 1-2 volume controls
• Bass/treble tone control
• Short circuit, overload and high temperature protection
• LED VU meter with peak and protect indication
3
Specications MA 130 MA 160
Power output: 30Wrms 60Wrms
Speaker output: 70V, 100V & 4-16Ω 70V, 100V & 4-16Ω
Frequency response (@50% power
output):
50Hz-18kHz 50Hz-18kHz
Power supply: 240V AC 50Hz 240V AC 50Hz
Power consumption: 51W 96W
Dimensions (H x W x D): 66 x 484 x 350mm 66 x 484 x 350mm
Weight: 7.6kg 9.6kg
Order Reference: CRAM02 CRAM03
Loading...