Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
TABLE TYPE
TWIN ELECTRIC KETTLES
“
SPLASH PROOF SERIES”, SELF-CONTAINED, 2⁄3 STEAM JACKETED,
Per Kettle: 3, 6 or 12 GALLONS (11, 23 or 45 LITERS)
Cleveland Standard Features
n Manual tilting, balanced design
n Space saving design through shared, center console
n Balanced, attractive appearance
n
Self-contained, easily installed - needs only an electrical hook-up
n Steam jacket filled with treated water, venting and/or refilling is
not required
n Accurate, consistant solid state temperature controls (mechani-
cal thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145
260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
n Water resistant controls, splash-proof construction
n Large pouring lip for high capacity and chunky products
n Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
n Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
n Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
n Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
n 50 psi steam jacket rating for higher cooking temperatures
n 50 psi safety valve
n
Solid state water level control (no sight glass gauge to break or leak)
n Splash proof element cover with a double gasket seal
n Self locking marine type tilting mechanism prevents acci-
dental spills. Balanced design makes it easy to tilt
n Standard for TKET-6-T and TKET-12-T is 208-240 volts, 60 Hz,
3-phase, 3-wire. Models TKET-6-T and TKET-12-T are field
rewirable to single phase. (Model TKET-3-T available in single
phase, 2-wire only).
n Typical approvals include UL., CSA, CE, NSF and ASME
° -
MODELS: c TKET-3-T c TKET-12-T
c TKET-6-T
Shown with optional
lift off covers
Short Form Specifications
Shall be CLEVELAND, electric twin kettles, Table Type, self-contained, tilting, Model TKET - _____ - T; _____ gallons each, _____ KW,
_____ volts, _____ Hz, 3 phase/3 wire or single phase/2 wire:
Splash Proof Solid State Temperature (±1° C) and Safety Control
System in plug-in Module including L.E.D. indicators,
Pouring Lips, Rear mounted Pressure/Vacuum Gauges,
Permanently filled Steam Jackets, 50 psi Steam Jacket Ratings and
Safety Valves. Optional Lift Off Covers.
p Stainless Steel Equipment Stand with Drain Drawer and Splash
Shield (ST-42 for TKET-3-T & TKET-6-T),
(ST-55-t for TKET-12-T)
p Kettle Markings (KM)
p Protective Control Panel (PCE)
with
Large
Options & Accessories
p Lift Off Covers (CL)
p Common Hot and Cold (DPK) or Cold only (SPK) Water Faucet
with Swing Spout. Requires Mounting Bracket (FBKT)
p 316 Stainless Steel Kettle Liner for high acid products (316-G)
p High wattages (HW) and special voltages (see back page)
p Cooking Baskets (BS)
p Food Strainers (FS)
p Measuring Strips (MS)
SECT. VIII PAGE 3
0707
CAPACITIES (PER KETTLE): (in 4 oz. servings,
30"
(762mm)
24"
(610mm)
18"
(457mm)
12 27/32"
(326mm)
4 3/8"
(111mm)
6 15/32"
(164mm)
4 27/32"
(123mm)
1 15/16"
(
49
mm)
5/16-18 THREADED
BUSHINGS
5/16-18 THREADED
BUSHINGS
5/16-18 THREADED
BUSHINGS
1 1/2"
(38mm)
7 9/32"
(185mm)
7 3/8"
(187mm)
10"
(254mm)
6 3/8"
(162mm)
1 11/32"
(34mm)
12 13/16"
(325mm)
12 1/2"
(318mm)
12 1/2"
(318mm)
12 1/2"
(318mm)
TKET-3-T TKET-6-T TKET-12-T
BASE MOUNTING DIAGRAMS
(VIEW FROM BOTTOM OF BASE)
•
other sizes may be calculated)
3 gallons / 11 liters ......... 96 servings
6 gallons / 23 liters ......... 192 servings
12 gallons / 45 liters ......... 352 servings
STANDARD WATTAGE
208V 240V 416V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
3 11 8.2 39.3 NA 10.9 45.4 NA NA NA NA NA NA NA
23
6
45
12
W
HIGH
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH
6 23 19.6 NA 54.5 26.1 NA 62.9 24.0 57.8 33.4 26.1 54.4 31.4
12
45 24.5 NA 68.1 32.7 NA 78.6 30.0 72.3 41.7 32.7 68.1 39.3
Consult factory for other voltages.
TES
NO
:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
59.0 34.1 16.3 68.1 39.3 15.0 36.1 20.9 16.3 34.0 19.6
12.3
94.4
19.6
TTAGE
A
208V 240V 416V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
26.1 108.9 62.9 24.0 57.8 33.4 26.1 54.4 31.4
54.5
3
⁄8˝ O.D. copper tube or
1
⁄2˝ N.P.T. pipe.
When ordered with
optional faucet.
CLEARANCE
RIGHT = 0˝
LEFT
REAR = See “
WATER
= 0˝
chart above.
Q” on
SECT
T
(NOT
.
VIII P
Litho in U.S.A.
O SCALE)
AGE
0707
4