Cleveland Motion Controls Clutch EMAG 26 User Manual
Specifications
Nominal torque 35 N.m ft.lbf 26
Minimal torque 0.33 N.m ft.lbf 0.25
Coil resistance - 20°C
Rated current DC A1
Rotor inertia 0.79.10-3kg.m2lb.ft 218.4 10
Weight 4.6 kg lb 10.14
Heat dissipation
continuous sustained
depending on external
part rotation speed
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
W * 100 250 340
(RPM) 0 1000 2000
W
19
Clutch
EMAG 26
-3
52
3
7
5,531 Ø
30
51
60
+ 0,3
-0
1,5
Max. deepness 17
2
21
Ø
no
8h 55 Ø
°06 t
a
5
M
selo
h
6
5 E9
31
J
2
,
9
1
2 holes
Ø 4,1
9
2
Ø 17 H7
+0,1
0
Application Notes
• Mounting must be made without any stress.
Lubricated for life (other internal lubrication not allowed).
The shaft should be lubricated upon assembly, to prevent seizing.
• Low DC current power supply for coil.
• The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
• For Engineering application, please contact our technical support.
• In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
61
40
35
30
25
mN euqroT
20
15
10
5
0
0 0,2 0,4 0,6 0,8 1
Current A
Safety
• If the device is to be used in dusty, humid or corrosive environment,
special protection needs to be considered.
Recommended mounting principles
In line mounting Parallel mounting
M
O
T
O
R
Rotating shaft
EMAG 26
M
O
T
O
R
Fixing flange
Flexible
coupling
Rotating shaft
Fixing flange
©Cleveland Motion Conrols, Inc.
7550 Hub Parkway • Cleveland, Ohio 44125
ph: 216.524.8800 or 800.321.8072 • fax: 216.642.2199
www.cmccontrols.com • email: literature@cmccontrols.com
Loading...