Cleveland Motion Controls Brake EMAG 9 User Manual
;;;;;
;;;;;
;;;;;
;;;;;
;;;;;
;;;;;
;;;;;
;;;;;;
;;;;;;
Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
6 holes M5 at 60° on Ø 103
To rque Nm
2 terminals
Max. deepness 12
Current A
Nominal torque 12 Nm ft.lb 9
Minimal torque 0.14 Nm ft.lb 0.1
Coil resistance - 20°C Ohms 23
Rated current DC A 0.55
Rotor inertia 0.25.10-3 kg.m2 lb.ft 2 5.8 10-3
Weight 2.6 kg lb 5.7
Heat dissipation
W *
Continuously sustained
65
Specifications
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
Cleveland-Kidder®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 9
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing
+ 0,3
46
-0
Ø 114,5
Ø 55 h8
4 E9
Ø 15 H7
16,2 J13
3,5
48
14
12
10
8
6
4
2
0
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;
;;;;;
;;;;;;
;;;;;;
Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
6 holes M5 at 60° on Ø 103
To rque Nm
Max. deepness 12
2 terminals
Current A
Nominal torque 12 Nm ft.lb 9
Minimal torque 0.14 Nm ft.lb 0.1
Coil resistance - 20°C Ohms 23
Rated current DC A 0.55
Rotor inertia 0.25.10-3 kg.m2 lb.ft 2 5.8 10-3
Weight 4.4 kg lb 9.7
Heat dissipation W *
Continuously sustained with heat sink – H 130
Continuously sustained with heat sink and blower – HB 650
Specifications
*Heat dissipation is the mechanical power (P = cw) maximum allowable.
Cleveland-Kidder®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 9H
EMAG 9HB
7550 Hub Parkway
Cleveland, OH 44125-5794
Te l: 216-524-8800 or (800)-321-8072
Fax: 216-642-2100
www.CMCcontrols.com
INDUSTRIAL PRODUCTS
© 2003 Cleveland Motion Controls. All Rights Reserved. Litho USA 10/03 3M EMAG9-DS
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing
48
3,5
4 E9
+ 0,3
46
-0
Ø 198
Ø 55 h8
Ø 114,5
Ø 15 H7
16,2 J13
14
12
10
8
6
4
2
0
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8
Loading...