Cleveland Motion Controls Brake EMAG 150 User Manual

Nominal torque 200 Nm ft.lb 150 Minimal torque 2 Nm ft.lb 1.5 Coil resistance - 20°C Ohms 12 Rated current DC A 1.55 Rotor inertia 35.2.10-3 kg.m2 lb.ft 2 818.10-3 Weight 24 kg lb 52.9 Heat dissipation

W *

Continuously sustained

400

Specifications

;;;;

56 99

Ø 230 h8

Ø 278

10 E9

Ø 38 H8

41,3 J13

* Heat dissipation is the mechanical power (P = cw) maximum allowable.

Application Notes

•Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing.

•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)

•The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability).

•For Engineering application, please contact our technical support.

•In normal use, the outside temperature of the device can increase up to 100°C, without damage.

To rque Nm

Current A

2 terminals

6 holes ﬂ 8,5 at 60¡ on ﬂ 263

Cleveland-Kidder®

ELECTROMAGNETIC PARTICLE BRAKE

EMAG 150

• Easy Electric Remote Control

• Low Power Consumption

• High Level of Torque Stability

• Highest Torque Density

• No Dust

• Noiseless

• Easy Installation

• Maintenance-Free Bearing

250

200

150

100

0 0,5 1 1,5 2

Nominal torque 200 Nm ft.lb 150 Minimal torque 2 Nm ft.lb 1.5 Coil resistance - 20°C Ohms 12 Rated current DC A 1.55 Rotor inertia 35.2.10-3 kg.m2 lb.ft 2 818.10-3 Weight 30 kg lb 66.15 Heat dissipation W * Continuously sustained with heat sink – H 750 Continuously sustained with heat sink and blower – HB 2000