Cleveland TMKEL-40-T, TMKEL-60-T, TMKEL-80-T Specifications

Download

Page 1

Cleveland

™

roject ________________________________

tem __________________________________

Quantity _______________________________

FCSI Section ____________________________

pproval _______________________________

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: [email protected]

MIXER KETTLES

TWIN MIXER KETTLE, ELECTRIC LEG MOUNTED, CONSOLE TYPE 2/3 JACKETED, TILTING

Cleveland Standard Features

n Solid State Temperature Control (±1°F) for perfect

simmering

n Solid State Low Water Safety Control n Steam Jacket filled with treated water, venting and/or refilling

not required

n 50 psi Safety V n No Water Gauge required n Rear mounted Pressure/Vacuum Gauge and Pressure Relief

Valve

n Infinitely Variable Scraper Speed Control from 0-40 rpm n Infinitely Variable Ratio between Scraper And Agitator:

Agitator rotates from 0-8 times the speed of the Scraper

n Removable (without tools) Nylon Blades scrape entire

Jacketed surface

n 3 Horsepower Hydraulic powered Agitator, Scraper and

Bridge Lift

n Safety Device prevents high speed starts n Mixer stops when Bridge is lifted n Agitator and Scraper are bayonet mounted for easy removal n Tilt mechanism of Roller Bearings and case hardened self-

Locking worm and segment gear

n Hot and Cold W n 2" diameter Tangent Draw-Off Valve with Drain Strainer n All Plumbing, Electrical and Hydraulics enclosed in Stainless

Steel Consoles

n Enclosed, 10 Gauge Stainless Steel hydraulically operated

Mixer Bridge

n Kettle and all Exterior surfaces are Stainless Steel n Level adjustable feet (flanged for bolting) n Large Pouring Lip n Gallon Markings stamped into Scraper Shaft n Standard 208-240 volts, 60 Hz, 3 phase, 4 wire, high wattage

ypical approvals include UL., CSA, CE, NSF and

n T

Options & Accessories

p Covers (MPT) p Product p Food Strainer (FS-20) p Flow Diverter (FD) p Pan Carrier (PCK) p Swing Funnels (SF-1 or SF-2) p Alternate Mounting Systems (wall)

alve and Steam Jacket Rating

ater Faucets

emperature Controls and Indicators

ime/T

ASME

MODELS: c TMKEL-40-T c TMKEL-80-T

c TMKEL-60-T c TMKEL-100-T

Shown with optional Power Tilt

Short Form Specifications

Shall be CLEVELAND, Model TMKEL- _____ -T, console/Leg mounted, Electric Mixer KettleS with permanently filled Steam Jackets; 50 psi Kettle Jacket Ratings and Safety Valves, High Wattage standard, Solid State

emperatur

T ered Scraper/Agitator and Bridge Lift. 0-40 rpm Scraper Speed with Variable Scraper to Agitator Ratio fr Bridge. All Plumbing, Electrical and Hydraulics enclosed in Consoles. Gallon Markings. Safety Device prevent high speed starts. high speed starts; Mixer stops when Bridge is lifted. Agitator and Scraper. 2" Tangent Draw-0ff Valve. Hot and Cold Water Faucet. Kettle and all exterior surfaces are Stainless Steel.

p Power Tilt (PT) p Kettle Accessory Kit (KAK) includes:

p Clean-up Brush (CB) p 36˝ Kettle Paddle (KP) p 36˝ Kettle Whip (KW) p 36˝ Kettle Brush (KB) p Draw-off Brush (DB) p 24 oz. Ladle (KL)

p T

products (316-20G)

p Water Meter (GMF or LMF) Wall Mount or on Stand (SWM) p Leg Extensions (ELTMK) p V

e (±1°F) and Low Water Safety Controls.

om 1-1 to 8-1. Stainless Steel enclosed Mixer

ype 316 Stainless Steel Interior for high acid food

other than standard

(VOS)

oltages

. H

3 H.P

ydraulic pow

Safety Device prevents

Bayonet Mounted

SECT. XI PAGE 7

0707

Page 2

(I.D.)

(TRUNNION)

26.50"

673mm

2" (51mm) TANGENT DRAW OFF VALVE

KETTLE

LIP IN

TILTED

POSITION

6.50" (165mm)

21.00"

533mm

3.00" 76mm

8.75"

222mm

COVER

FULLY OPEN

7.25"

184mm

3.25"

83mm

H C

SEE

RECOMMENDED

FLOOR SLOPE

+ 0.125 (3.18mm), - 0

18"

475mm

10"

254mm

5.75" 146mm

5.75"

146mm

REAR OF CONSOLE

SEE FLANGED

FOOT DETAIL

FLOOR

DRAIN

GRATES

5" (127mm)

Q Q

13"

330mm

5.00"

127mm

(DRAIN

GRATE)

(DRAIN

GRATE)

0.56"

14mm

120º TYP

1.00" (25mm)

MAX. ADJUSTMENT

1.625" (42mm)

FLANGED FOOT DETAIL

0.44" (11mm)

3 HOLES ON

3.125" (80MM)

B.C.D.

4 7/8"

124

FLOOR SLOPE = 1.00" (26mm) per 4' (1220mm)

RECOMMENDED FLOOR SLOPE

PIPE DRAIN RECOMMENDED min. valve size plus 1.00" (26mm)

6.00" (153mm) RECOMMENDED

4.00" (102mm) MINIMUM

40/150 99.00

2511

26.00 660

43.25 1099

52.75 1340

72.00 1829

10.25 260

23.13 587

55.75 1416

11.00 279

27.38 695

39.88 1013

36.00 915

18.38 467

28.00 711

38.00 965

5.63 143

27.00 686

30.00 762

44.00 1118

18.25 464

76.00 1930

GAL/LIT A C D E F G H J K ML N0PQRST UVWX Y

60/225 106.00

689

29.50 7

43.25 1

099

52.75 1

340

73.00 1

854

10.25 2

23.13 5

57.50 1

460

6.63 1

27.38 6

42.13 1

070

36.00 9

18.38 4

28.00 7

41.50 1

054

6.50 1

9.50 7

31.00 7

45.00 1

143

14.75 3

79.00 2

007

0/300 113.00

867

3.00

5.75

162

5.25

403

9.00

007

2.75

6.38

9.00

500

.63

2.63

6.38

178

9.25

1.63

1.25

5.00

143

.38

1.38

5.00

6.00

168

5.00

4.00

134

00/375 35.50

902

7.75

1213

7.25

1454

2.00

2083

4.75

375

6.38

670

1.00

1550

.00

152

2.63

778

7.63

1210

9.25

997

1.63

549

1.25

794

7.50

1207

.00

203

3.00

838

6.00

914

7.00

1194

5.00

381

54.38 1381

30.50 775

58.50 1

486

34.00 8

3.00

600

7.50 9

6.00

1676

0.00

1016

9.00

2261

17.88

2994

DIMENSIONS ("/mm)

3.00"

76mm

18" (457mm) Recomended 0 = Minimum

16.00 406

18.25 464

19.13 486

20.75 527

35.75 980

37.50 953

42.75

1086

43.75

1111

39.00 991

40.75

1035

46.00

1168

47.00

1194

Kettle

L 200 3 3 60 22684 81.6 3

TT A

R 200 3 3 60 22684 65.5 4

L R L 220 3 3 60 27448 87.1 2

TMKEL-40-T

R 220 3 3 60 27448 72.0 3 L 230 3 3 60 30000 90.0 2 R 230 3 3 60 30000 75.3 3 L R 240 3 3 60 32665 78.6 3

ELECTRICAL - HIGH

L 380 3 3 60 25153 47.1 6 R

TES

Cleveland Range reserves right of design improvement or modification, as warranted. Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes. Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer. Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.

oltage

Supply

(Left/Right)

208 208 3 3 60 24535 68.1 4

240

380

Phase

Wires

Total

Wattage

83.8

24535

3 60 32665 92.8 2

38.2

25153

Supply

Amps

Wire Size

Supply

Kettle

(Left/Right)

L 400 3 3 60 27871 48.8 6 R 400 3 3 60 27871 40.2 6

415

415 3 3 60 30000 41.7 6

R L 440 3 3 60 27448 44.1 6

TMKEL-40-T

R 440 3 3 60 27448 36.0 8 L 480 3 3 60 32665 46.9 6 R 480 3 3 60 32665 39.3 6

oltage V

Phase

Wires

30000

WATER

oltage

Supply

Kettle

Total

Wattage

Supply

Amps

Wire Size

50.1

(Left/Right)

Phase

Wires

Total

29442

30184

Wattage

L 200 3 3 60 27221 94.7 2 R 200 3 3 60 27221 78.6 3 L R L 220 3 3 60 32938 101.5 1 R 220 3 3 60 32938 86.4 2 L 230 3 3 60 36000 105.0 1 R 230 3 3 60 36000 90.4 2 L R 240 3 3 60 39198 94.3 2 L 380 3 3 60 30184 54.7 6

TMKEL-60-T, TMKEL-80-T, TMKEL-100-T

208 208 3 3 60 29442 81.7 3

3 60 39198 108.5 1

240

380

97.4

45.9

Supply

Amps

Wire Size

oltage

Supply

Kettle

(Left/Right)

Phase

Wires

Total

L 400 3 3 60 33445 56.8 4 R 400 3 3 60 33445 48.3 6 L R

, TMKEL-100-T

L 440 3 3 60 32938 51.3 6 R 440 3 3 60 32938 43.2 6 L 480 3 3 60 39198 54.8 6 R 480 3 3 60 39198 47.1 6

, TMKEL-80-T

TMKEL-60-T

415 415 3 3 60 36000 50.1 6

Wattage

36000

Supply

Amps

Wire Size

58.4

SECT. XI PAGE 8

Hot Water 3/4 NPT

ater 3/4 NPT

Cold W

CLEARANCE

Right - 0, Left - 0

Rear -

18" (457mm) Recommended 0 - Minimum

(NOT TO SCALE)

0707

Litho in USA