Cleveland TKET-12-T User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
TABLE TYPE
TWIN ELECTRIC KETTLES
“
SPLASH PROOF SERIES”, SELF-CONTAINED, 2⁄3 STEAM JACKETED,
Per Kettle: 3, 6 or 12 GALLONS (11, 23 or 45 LITERS)
Cleveland Standard Features
II
Manual tilting, balanced design
II
Space saving design through shared, center console
II
Balanced, attractive appearance
II
Self-contained, easily installed - needs only an electrical hook-up
II
Steam jacket filled with treated water, venting and/or refilling is
not required
II
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145° 260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
II
Water resistant controls, splash-proof construction
II
Large pouring lip for high capacity and chunky products
II
Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
II
Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
II
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
II
Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
II
50 psi steam jacket rating for higher cooking temperatures
II
50 psi safety valve
II
Solid state water level control (no sight glass gauge to break or leak)
II
Splash proof element cover with a double gasket seal
II
Self locking marine type tilting mechanism prevents accidental spills. Balanced design makes it easy to tilt
II
Standard for TKET-6-T and TKET-12-T is 208-240 volts, 60 Hz,
3-phase, 3-wire. Models TKET-6-T and TKET-12-T are field
rewirable to single phase. (Model TKET-3-T available in single
phase, 2-wire only).
II
Typical approvals include UL., CSA, CE, NSF and ASME
MODELS: TKET-3-T TKET-12-T
TKET-6-T
Shown with optional
lift off covers
Short Form Specifications
Shall be CLEVELAND, electric twin kettles, Table Type, self-contained, tilting, Model TKET - _____ - T; _____ gallons each, _____ KW,
_____ volts, _____ Hz, 3 phase/3 wire or single phase/2 wire: with
Splash Proof Solid State Temperature (±1° C) and Safety Control
System in plug-in Module including L.E.D. indicators, Large
Pouring Lips, Rear mounted Pressure/Vacuum Gauges,
Permanently filled Steam Jackets, 50 psi Steam Jacket Ratings and
Safety Valves. Optional Lift Off Covers.
Ë Stainless Steel Equipment Stand with Drain Drawer and Splash
Shield (ST-42 for TKET-3-T & TKET-6-T),
(ST-55-t for TKET-12-T)
Ë Kettle Markings (KM)
Ë Protective Control Panel (PCE)
Options & Accessories
Ë Lift Off Covers (CL)
Ë Common Hot and Cold (DPK) or Cold only (SPK) Water Faucet
with Swing Spout. Requires Mounting Bracket (FBKT)
Ë 316 Stainless Steel Kettle Liner for high acid products (316-G)
Ë High wattages (HW) and special voltages (see back page)
Ë Cooking Baskets (BS)
Ë Food Strainers (FS)
Ë Measuring Strips (MS)
SECT. VIII PAGE 3
0609
APACITIES (PER KETTLE): (in 4 oz. servings,
H
C
30"
(762mm)
24"
(610mm)
18"
(457mm)
12 27/32"
(326mm)
4 3/8"
(111mm)
6 15/32"
(164mm)
4 27/32"
(123mm)
1 15/16"
(
49mm)
5/16-18 THREADED
BUSHINGS
5/16-18 THREADED
BUSHINGS
5/16-18 THREADED
BUSHINGS
1 1/2"
(38mm)
7 9/32"
(185mm)
7 3/8"
(187mm)
10"
(254mm)
6 3/8"
(162mm)
1 11/32"
(34mm)
12 13/16"
(325mm)
12 1/2"
(318mm)
12 1/2"
(318mm)
12 1/2"
(318mm)
TKET-3-T TKET-6-T TKET-12-T
BASE MOUNTING DIAGRAMS
(VIEW FROM BOTTOM OF BASE)
C
•
other sizes may be calculated)
3 gallons / 11 liters ......... 96 servings
6 gallons / 23 liters ......... 192 servings
12 gallons / 45 liters ......... 352 servings
STANDARD WATTAGE
208V 240V 415V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
3 11 8.2 39.3 NA 10.9 45.4 NA NA NA NA NA NA NA
6 23 12.3 59.0 34.1 16.3 68.1 39.3 15.0 36.1 20.9 16.3 34.0 19.6
12 45 19.6 94.4 54.5 26.1 108.9 62.9 24.0 57.8 33.4 26.1 54.4 31.4
HIGH WATTAGE
208V 240V 415V 480V
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH
6 23 19.6 NA 54.5 26.1 NA 62.9 24.0 57.8 33.4 26.1 54.4 31.4
12 45 24.5 NA 68.1 32.7 NA 78.6 30.0 72.3 41.7 32.7 68.1 39.3
Consult factory for other voltages.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
WATER
3
⁄8˝ O.D. copper tube or
1
⁄2˝ N.P.T. pipe.
When ordered with
optional faucet.
CLEARANCE
RIGHT = 0˝
LEFT = 0˝
REAR = See “Q” on
chart above.
(NOT TO SCALE)
SECT. VIII PAGE 4
Litho in U.S.A.
0609
Loading...