Cleveland TD2A90 User Manual

Cleveland

™

P

roject ________________________________

Item __________________________________

Quantity _______________________________

F

CSI Section ____________________________

A

pproval _______________________________

D

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: [phone]

Fax: [phone]

Web Site: www.ClevelandRange.com

Email: [e-mail]

OPTIONS & ACCESSORIES

2" TANGENT DRAW OFF VALVE
WITH DRAIN HOSE ASSEMBLY

Cleveland Standard Features

II

Used to connect Cleveland Range Kettles that have
offset Tangent Draw-Off Valves to existing center
positioned drains

II

Used to connect Cleveland Kettles to
remote drain locations

TD2A90 Includes:

*

• 2" Tangent Draw-Off Valve
with ACME Thread (TD2A)

• 90º Stainless Steel Elbow (HEA90)

• 8' length of 2" ID Hose (HO8.2)

(cut to required length)

• Hose Clamp

MODELS:

 TD2A90  TD2A45

TD2A

Tangent

Draw-Off

Valve with

ACME

Thread

HEA90

90º Stainless Steel Elbow

HEA45

45º Stainless Steel Elbow

TD2A45 Includes:

*

• 2" Tangent Draw-Off Valve
with ACME Thread (TD2A)

• 45º Stainless Steel Elbow (HEA45)

• 8' length of 2" ID Hose (HO8.2)

(cut to required length)

• Hose Clamp

NOTE: The TD2A (Tangent Draw-off with Acme Thread) must be

*

configured on kettle at time of purchase. It cannot be replaced,
installed, or retro-fitted in the field.

8' length of 2" ID Hose

HO8.2

(cut to required length)

Includes hose clamp

SECT. XIII PAGE 9

0609

3.72"

95mm

3

.72"

9

5mm

2.13"

56mm



2.13"
56mm



HEA90

HEA45

DIMENSIONS

(NOT TO SCALE)

SECT. XIII PAGE 10

0609

Litho in U.S.A.