Cleveland SD-1200-K612, SD-1600-K1220, SD-1600-K 620, SD-1600-K1212, SD-1600-K2020 Specifications

Cleveland

™

P

roject ________________________________

I

tem __________________________________

Quantity _______________________________

FCSI Section ____________________________

A

pproval _______________________________

D

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: [phone]

Fax: [phone]

Web Site: www.ClevelandRange.com

Email: [e-mail]

DIRECT STEAM KETTLES

STAND MOUNTED, DIRECT STEAM

6, 12 or 20 GAL. TILTING, 2/3 STEAM JACKETED (1 or 2 EACH)
18" HIGH STAND with DRAIN
450, 650, 1050,1200 or 1600mm WIDTHS

Cleveland Standard Features

n Type 304 Stainlesss Steel construction, with #4 finish on

Kettle

n Factory Assembled Kettle/Stand combinations with available

kettle capacities to suit most needs

n Steam Control Kit: includes: Needle Type Steam Control

Valve, Steam Trap, Condensate Strainer, Check Valve,
Nipples and Fittings, factory assembled and mounted on
kettles(s)

n Kettles are Mounted on Stainless Steel Stand of Modular

Cabinetiz

n Hot and Cold Water Faucet with Swing Spout

n Table Top has Full Width Drain Trough equipped with

standing 1.50" diameter male Dr

n Sliding drain Catch Pan with Splash Shield, easy to

position f

n Kettles are 2/3 Steam Jacketed and include Lift-Off Covers

n 50 psi Steam Jacket Rating

n 50 psi Chrome Plated Saftey Valve

n Manual Tilting, Balanced Design

n Typical approvals include NSF and ASME

Options & Accessories

p Type 316 Stainless Steel Kettle Interior for high acid food

products (316)

p Cooking Basket (BS)

ood Strainer (FS)

p F

p Steam Pressure Reducing Valve, where supply exceeds 45

psi (PR

p Steam Supply Moisture Separator/Trap (MS)

p Single Pantry Faucet (SPK)

p Wall Meter, wall mount (GM For MLMF)

p Water Cooling, wall mount

p Back Wall or Back Splash (BW-32 or BS-4)

p Self Locking Hand Tilt Mechanism (HTK - 12 gallons only)

ed Design

ain Connection

or use

V)

MODELS: c SD-450-K6 c SD-1200-K612

c SD-650-K12 c SD-1600-K1212
c SD-1050-K20 c SD-1800-K2020
c SD-1050-K66

Short Form Specifications

Shall be CLEVELAND, Kettle(s) with Stand, Model SD - _____- K _____, full
width Drain Trough with1 1/2" male Drain Connection, Sliding Catch Pan
and 2/3 Steam Jacketed Kettle(s) _____ea. _____Gallon (and _____ea. _____
Gallon) Steam Jacket Ratings to be 50 psi; Kettle and Legs to be Type 304
Stainless Steel. To operate, connect directly to a steam source supplying
from 5 to 45 psi steam. Steam Condensate Trap and Strainer, Factory
Assembled and Installed; includes: Hot and Cold Water Faucet with Swing
Spout and Lift-Off Kettle Covers.

SECT. X PAGE 7

0707

CAPACITIES: (in 4 oz. servings,
other sizes may be calculated.)

6 Gallon / 23 liters . . . 160 per kettle
12 Gallon / 45 liters . . . 352 per kettle
20 Gallon / 80 liters . . . 704 per kettle

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Installation of backflow preventers, vacuum breakers and other specific coder requirements is the responsibility of the owner and installer.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., A.G.A., NSF, ASME/N.Bd., CSA, CGA, ETL and others.

T

T

(NO

.

SECT

X P

Litho in U.S.A.

O SCALE)

GE

A

0707

8