Cleveland P-KDL-100-CC User Manual

Cleveland

™

roject ________________________________

Item __________________________________

Quantity _______________________________

CSI Section ____________________________

pproval _______________________________

ate __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: Steam@ClevelandRange.com

COOK CHILL SYSTEMS

Cook/Chill Systems

COOK/CHILL PASTA KETTLES

Cleveland Standard Features

I Full 60,100,150 or 200 gallon kettle working capacity I Bottom cold water injection system for rinsing pasta

products

I Two large overflow drains with heavy duty rim bar I Top mounted, easily removable temperature probe I Simmer control for cooking delicate products I 3” diameter air operated, flush mounted piston draw-off valve

(requires air compressor)

I Spiral flights for even cooling I Kettle mounted valve box for single point utility connections I 100 psi steam jacket rating and safety valve I Type 316 stainless steel for all food contact surfaces I Water fill faucet with swing spout I NSF approved I Accepted for use in USDA inspected facilities

Note: Each COOK/CHILL pasta kettle requires a remote mounted con-

trol center for operation which must be specified separately.

MODELS:  P-KDL-60-CC  P-KDL-150-CC

 P-KDL-100-CC  P-KDL-200-CC

Standard Features for Kettle Control Center:

I Solid state temperature control with digital read-out I Time/Temperature Chart Recorder to provide permanent

record of Batch Processing

I Switch for cold water injection system I Automatic and manual steam control I Automatic and manual water cooling I Simmer control for delicate products I Automatic water meter with accumulative “add on” button

and digital readout

I U.L. listed

Options & Accessories

Ë Water meter for hot and cold kettle fill

Ë Stainless steel lift-off cover Ë Perforated stainless steel pasta basket with

sliding dump gate

Ë Dolly for pasta basket Ë Single or dual remote control center Ë 3” flush mounted ball valve Ë Loading bucket and dolly Ë Electric chain hoist for lifting pasta basket

Ë 3", 90° Elbow

Short Form Specifications

Shall be CLEVELAND Model P-KDL -_____ - CC COOK/CHILL STATIONARY PASTA KETTLE, ___ gallons; leg mounted; 2/3

jacketed, direct steam; 100 psi Steam Jacket Pressure Rating; 316 Stainless Steel Liner; 3" diameter air operated, flush mounted Piston Draw-Off Valve; bottom Water injection System; Overflow Ring with two large vertically mounted Overflow Drains; Automatic Water Meter; Water Fill Faucet with swing spout; Time/Temperature Chart Recorder (located in Control Center).

SECT. XIV PAGE 13

0609

OPTIONAL CONNECTIONS LOCATED ON SIDE

QUICK DISCONNECT FOR FOOD PUMP (LOCATION VARIES)

IF KETTLE IS MORE THAN 3'

FROM THE CONTROL PANEL

THEN THE PRODUCT VALVE

SWITCH WILL BE KETTLE MNTD.

(LOCATION VARIES)

OPTIONAL HOT

FILL WATER ONLY

69"

OVER FLOW

PLAN VIEW

DEPTH 18 3/4"

CONTROL PANEL

DUAL CONTROL PANEL

P-DR-CC

P-SR-CC

SINGLE CONTROL PANEL

SIDE VIEW

OPERATIONAL

FRONT

OTE:

12 1/2"

MINIMUM CLEARANCE

FOR KETTLES

FRONT 36" SIDE 12" REAR 12"

ELECTRICAL POWER TO AND FROM CONTROL PANEL

• CONTRACTOR MUST CUT ENTRY HOLE

• TOP OR BOTTOM POWER ENTRY RECOMMENDED

• MUST USE PROPER CONNECTIONS TO MAINTAIN U.L. LISTING

DIMENSIONS

MODEL ABCDEFELECTRICAL PER KETTLE-

P-KDL-60-CC 32" 52" 45 1/2" 8" 24" 56" 10 AMPS P-KDL-100-CC 39" 59" 49 1/2" 9" 28" 60" 10 AMPS P-KDL-150-CC 45" 63" 55 1/2" 9" 30" 66" 10 AMPS P-KDL-200-CC 49" 67" 57 1/2" 9" 32" 68" 10 AMPS

UTILITY CONNECTIONS

MODEL INLET RETURN WATER WATER RETURN DRAIN INLET STEAM WATER

P-KDL-60-CC 3/4" 3/4" 3/4" 3/4" 1/2" 3/4" 1/2" 3/4" 3/4"

P-KDL-100-CC 1" 1" 3/4" 3/4" 3/4" 1" 1/2" 1" 3/4"

P-KDL-150-CC 1 1/4" 1 1/4" 3/4" 3/4" 1" 1 1/4" 1/2" 1 1/4" 3/4"

P-KDL-200-CC 1 1/4" 1 1/4" 3/4" 3/4" 1" 1 1/4" 1/2" 1 1/4" 3/4"

** HOT FILL WATER IS OPTIONAL

NOTES: The pressure drop is 12 to 15 PSI for steam and chilled water passing through the kettle.

Cleveland Range reserves right of design improvement or modification, as warranted.

CHILLED CHILLED COLD COLD

WATER WATER POTABLE HOT CONDENSATE AIR INJECTOR

15 GPM 15 GPM 15 GPM 1 CFM 320 lbs/hr 15 GPM

20 GPM 20 GPM 20 GPM 1 CFM 525 lbs/hr 20 GPM

20 GPM 20 GPM 20 GPM 1 CFM 780 lbs/hr 20 GPM

25 GPM 20 GPM 20 GPM 1 CFM 1050 lbs/hr 20 GPM

65 PSI STEAM OPERATING PRESSURE IS RECOMMENDED

Air must be dry, clean and free of oil.

120V/1PH/60Hz

(NOT TO SCALE)

SECT. XIV PAGE 14

0609

Litho in USA